Re: snd_hda_codec_hdmi: `hdaudio hdaudioC0D2: Unable to bind the codec`

From: Takashi Iwai
Date: Mon Feb 18 2019 - 10:38:38 EST


On Mon, 18 Feb 2019 16:17:30 +0100,
Paul Menzel wrote:
>
> >> Then, I built the HDA subsystem as a module, but that also did not help.
> >> The DRM subsystem is started after the HD-audio subsystem.
> >>
> >> ```
> >> $ grep -e SND_HDA= -e SND_HDA_INTEL /boot/config-4.20.8.mx64.245
> >> CONFIG_SND_HDA=m
> >> CONFIG_SND_HDA_INTEL=m
> >
> > That's odd. In sound/hda/hdac_i915.c there is an explicit
> > request_module("i915"), and at that point, it has a 10 second
> > timeout. If this isn't enough, try to raise the number, e.g. 60
> > seconds.
>
> I tried as you suggested, and increased it to 60 seconds.
>
> sed -i 's/msecs_to_jiffies(10 * 1000))/msecs_to_jiffies(60 * 1000))/' sound/hda/hdac_i915.c
>
> That seems to have fixed it.
>
> ```
> $ grep _hda_ 20190218âlinux_4.20.10âdmesg.txt
> [ 15.568061] snd_hda_intel 0000:00:1f.3: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
> [ 15.706898] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC671: line_outs=1 (0x21/0x0/0x0/0x0/0x0) type:line
> [ 15.708754] snd_hda_codec_realtek hdaudioC0D0: speaker_outs=1 (0x17/0x0/0x0/0x0/0x0)
> [ 15.710249] snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x14/0x0/0x0/0x0/0x0)
> [ 15.712031] snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0
> [ 15.712348] snd_hda_codec_realtek hdaudioC0D0: inputs:
> [ 15.712619] snd_hda_codec_realtek hdaudioC0D0: Front Mic=0x19
> [ 15.712929] snd_hda_codec_realtek hdaudioC0D0: Rear Mic=0x18
> [ 15.713234] snd_hda_codec_realtek hdaudioC0D0: Line=0x1a
> ```
>
> So the time-out, needs to be increased.

OK, I'm going to extend the value. I thought a minute would be too
long, and I naively assumed that the recent machines were fast
enough. Maybe 60 isn't too bad after all.


thanks,

Takashi