[PATCH] i2c: Allow recovery of the initial IRQ by an I2C client device.

[Jim Broadus]

A previous change allowed I2C client devices to discover new IRQs upon
reprobe by clearing the IRQ in i2c_device_remove. However, if an IRQ was
assigned in i2c_new_device, that information is lost.

For example, the touchscreen and trackpad devices on a Dell Inspiron laptop
are I2C devices whose IRQs are defined by ACPI extended IRQ types. The
client device structures are initialized during an ACPI walk. After
removing the i2c_hid device, modprobe fails.

This change caches the initial IRQ value in i2c_new_device and then resets
the client device IRQ to the initial value in i2c_device_remove.

Fixes: 6f108dd70d30 ("i2c: Clear client->irq in i2c_device_remove")
Signed-off-by: Jim Broadus <jbroadus@xxxxxxxxx>
---
 drivers/i2c/i2c-core-base.c | 9 +++++----
 include/linux/i2c.h         | 1 +
 2 files changed, 6 insertions(+), 4 deletions(-)

diff --git a/drivers/i2c/i2c-core-base.c b/drivers/i2c/i2c-core-base.c
index 28460f6a60cc..af87a16ac3a5 100644
--- a/drivers/i2c/i2c-core-base.c
+++ b/drivers/i2c/i2c-core-base.c
@@ -430,7 +430,7 @@ static int i2c_device_remove(struct device *dev)
 	dev_pm_clear_wake_irq(&client->dev);
 	device_init_wakeup(&client->dev, false);
 
-	client->irq = 0;
+	client->irq = client->init_irq;
 
 	return status;
 }
@@ -741,10 +741,11 @@ i2c_new_device(struct i2c_adapter *adap, struct i2c_board_info const *info)
 	client->flags = info->flags;
 	client->addr = info->addr;
 
-	client->irq = info->irq;
-	if (!client->irq)
-		client->irq = i2c_dev_irq_from_resources(info->resources,
+	client->init_irq = info->irq;
+	if (!client->init_irq)
+		client->init_irq = i2c_dev_irq_from_resources(info->resources,
 							 info->num_resources);
+	client->irq = client->init_irq;
 
 	strlcpy(client->name, info->type, sizeof(client->name));
 
diff --git a/include/linux/i2c.h b/include/linux/i2c.h
index 65b4eaed1d96..7e748648c7d3 100644
--- a/include/linux/i2c.h
+++ b/include/linux/i2c.h
@@ -333,6 +333,7 @@ struct i2c_client {
 	char name[I2C_NAME_SIZE];
 	struct i2c_adapter *adapter;	/* the adapter we sit on	*/
 	struct device dev;		/* the device structure		*/
+	int init_irq;			/* irq set at initialization	*/
 	int irq;			/* irq issued by device		*/
 	struct list_head detected;
 #if IS_ENABLED(CONFIG_I2C_SLAVE)
-- 
2.20.1