[PATCH 5/5] PCI: dwc: Remove superfluous shifting in definitions

[Andrey Smirnov]

Surrounding definitions no longer use explicit shift, so "<< 0" here
serve no purpose. Remove them. No functional change intended.

Signed-off-by: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
Acked-by: Gustavo Pimentel <gustavo.pimentel@xxxxxxxxxxxx>
Cc: Lorenzo Pieralisi <lorenzo.pieralisi@xxxxxxx>
Cc: Bjorn Helgaas <bhelgaas@xxxxxxxxxx>
Cc: Fabio Estevam <fabio.estevam@xxxxxxx>
Cc: Chris Healy <cphealy@xxxxxxxxx>
Cc: Lucas Stach <l.stach@xxxxxxxxxxxxxx>
Cc: Leonard Crestez <leonard.crestez@xxxxxxx>
Cc: "A.s. Dong" <aisheng.dong@xxxxxxx>
Cc: Richard Zhu <hongxing.zhu@xxxxxxx>
Cc: linux-imx@xxxxxxx
Cc: linux-arm-kernel@xxxxxxxxxxxxxxxxxxx
Cc: linux-kernel@xxxxxxxxxxxxxxx
Cc: linux-pci@xxxxxxxxxxxxxxx
---
 drivers/pci/controller/dwc/pcie-designware.h | 14 +++++++-------
 1 file changed, 7 insertions(+), 7 deletions(-)

diff --git a/drivers/pci/controller/dwc/pcie-designware.h b/drivers/pci/controller/dwc/pcie-designware.h
index 8ebfb06584d9..f6fb65a40f10 100644
--- a/drivers/pci/controller/dwc/pcie-designware.h
+++ b/drivers/pci/controller/dwc/pcie-designware.h
@@ -60,14 +60,14 @@
 #define PCIE_ATU_VIEWPORT		0x900
 #define PCIE_ATU_REGION_INBOUND		BIT(31)
 #define PCIE_ATU_REGION_OUTBOUND	0
-#define PCIE_ATU_REGION_INDEX2		(0x2 << 0)
-#define PCIE_ATU_REGION_INDEX1		(0x1 << 0)
-#define PCIE_ATU_REGION_INDEX0		(0x0 << 0)
+#define PCIE_ATU_REGION_INDEX2		0x2
+#define PCIE_ATU_REGION_INDEX1		0x1
+#define PCIE_ATU_REGION_INDEX0		0x0
 #define PCIE_ATU_CR1			0x904
-#define PCIE_ATU_TYPE_MEM		(0x0 << 0)
-#define PCIE_ATU_TYPE_IO		(0x2 << 0)
-#define PCIE_ATU_TYPE_CFG0		(0x4 << 0)
-#define PCIE_ATU_TYPE_CFG1		(0x5 << 0)
+#define PCIE_ATU_TYPE_MEM		0x0
+#define PCIE_ATU_TYPE_IO		0x2
+#define PCIE_ATU_TYPE_CFG0		0x4
+#define PCIE_ATU_TYPE_CFG1		0x5
 #define PCIE_ATU_CR2			0x908
 #define PCIE_ATU_ENABLE			BIT(31)
 #define PCIE_ATU_BAR_MODE_ENABLE	BIT(30)
-- 
2.20.1