[PATCH net-next 0/7] net: phy: marvell10g: Add 2.5GBaseT

[Maxime Chevallier]

This series adds the missing bits necessary to fully support 2.5GBaseT
in the Marvell Alaska PHYs.

The main points for that support are :

 - Making use of the .get_features call, recently introduced by Heiner
   and Andrew, that allows having a fully populated list of supported
   modes, including 2500BaseT.  

 - Configuring the MII to 2500BaseX when establishing a link at 2.5G

 - Adding a small quirk to take into account the fact that some PHYs in
   the family won't report the correct supported abilities

The rest of the series consists of small cosmetic improvements such as
using the correct helper to set a linkmode bit and adding macros for the
PHY ids.

We also add support for the 88E2110 PHY, which doesn't require the
quirk, and support for 2500BaseT in the PPv2 driver, in order to have a
fully working setup on the MacchiatoBin board.

Maxime Chevallier (7):
  net: phy: marvell10g: Use get_features to get the PHY abilities
  net: phy: marvell10g: Use linkmode_set_bit helper instead of __set_bit
  net: phy: marvell10g: Use 2500BASEX when using 2.5GBASET
  net: phy: marvell10g: Use a #define for 88X3310 family id
  net: phy: marvell10g: Force reading of 2.5/5G
  net: mvpp2: Add 2.5GBaseT support
  net: phy: marvell10g: add support for the 88x2110 PHY

 .../net/ethernet/marvell/mvpp2/mvpp2_main.c   |  1 +
 drivers/net/phy/marvell10g.c                  | 92 ++++++++++++++++---
 include/linux/marvell_phy.h                   |  2 +
 3 files changed, 81 insertions(+), 14 deletions(-)

-- 
2.19.2