[PATCH v4 2/2] usb: chipidea: Refactor USB PHY selection and keep a single PHY

[Paul Kocialkowski]

Refactor the code in charge of looking up the USB PHY when no platdata
is provided. Attempt to get a generic USB PHY first, then look for a
legacy USB PHY through device-tree and finally get any registered PHY
with the correct type.

This way, only a single USB PHY is obtained and the flow is easier to
understand and follow.

All error pointers (except for EPROBE_DEFER) are considered as PHY
not found.

Signed-off-by: Paul Kocialkowski <paul.kocialkowski@xxxxxxxxxxx>
---
 drivers/usb/chipidea/core.c | 49 ++++++++++++++++++++++++-------------
 1 file changed, 32 insertions(+), 17 deletions(-)

diff --git a/drivers/usb/chipidea/core.c b/drivers/usb/chipidea/core.c
index 016e4004fe9d..27749ace2d93 100644
--- a/drivers/usb/chipidea/core.c
+++ b/drivers/usb/chipidea/core.c
@@ -954,32 +954,47 @@ static int ci_hdrc_probe(struct platform_device *pdev)
 	} else if (ci->platdata->usb_phy) {
 		ci->usb_phy = ci->platdata->usb_phy;
 	} else {
-		ci->usb_phy = devm_usb_get_phy_by_phandle(dev->parent, "phys",
-							  0);
+		/* Look for a generic PHY first */
 		ci->phy = devm_phy_get(dev->parent, "usb-phy");
 
-		/* Fallback to grabbing any registered USB2 PHY */
-		if (IS_ERR(ci->usb_phy) &&
-		    PTR_ERR(ci->usb_phy) != -EPROBE_DEFER)
+		if (PTR_ERR(ci->phy) == -EPROBE_DEFER) {
+			ret = -EPROBE_DEFER;
+			goto ulpi_exit;
+		} else if (IS_ERR(ci->phy)) {
+			ci->phy = NULL;
+		}
+
+		/* Look for a legacy USB PHY from device-tree next */
+		if (!ci->phy) {
+			ci->usb_phy = devm_usb_get_phy_by_phandle(dev->parent,
+								  "phys", 0);
+
+			if (PTR_ERR(ci->usb_phy) == -EPROBE_DEFER) {
+				ret = -EPROBE_DEFER;
+				goto ulpi_exit;
+			} else if (IS_ERR(ci->usb_phy)) {
+				ci->usb_phy = NULL;
+			}
+		}
+
+		/* Look for any registered legacy USB PHY as last resort */
+		if (!ci->phy && !ci->usb_phy) {
 			ci->usb_phy = devm_usb_get_phy(dev->parent,
 						       USB_PHY_TYPE_USB2);
 
-		/* if both generic PHY and USB PHY layers aren't enabled */
-		if (PTR_ERR(ci->phy) == -ENOSYS &&
-				PTR_ERR(ci->usb_phy) == -ENXIO) {
-			ret = -ENXIO;
-			goto ulpi_exit;
+			if (PTR_ERR(ci->usb_phy) == -EPROBE_DEFER) {
+				ret = -EPROBE_DEFER;
+				goto ulpi_exit;
+			} else if (IS_ERR(ci->usb_phy)) {
+				ci->usb_phy = NULL;
+			}
 		}
 
-		if (IS_ERR(ci->phy) && IS_ERR(ci->usb_phy)) {
-			ret = -EPROBE_DEFER;
+		/* No USB PHY was found in the end */
+		if (!ci->phy && !ci->usb_phy) {
+			ret = -ENXIO;
 			goto ulpi_exit;
 		}
-
-		if (IS_ERR(ci->phy))
-			ci->phy = NULL;
-		else if (IS_ERR(ci->usb_phy))
-			ci->usb_phy = NULL;
 	}
 
 	ret = ci_usb_phy_init(ci);
-- 
2.20.1