[PATCH v2 2/2] loop: set GENHD_FL_NO_PART_SCAN after blkdev_reread_part()

From: Dongli Zhang
Date: Thu Feb 21 2019 - 10:30:50 EST


Commit 0da03cab87e6
("loop: Fix deadlock when calling blkdev_reread_part()") moves
blkdev_reread_part() out of the loop_ctl_mutex. However,
GENHD_FL_NO_PART_SCAN is set before __blkdev_reread_part(). As a result,
__blkdev_reread_part() will fail the check of GENHD_FL_NO_PART_SCAN and
will not rescan the loop device to delete all partitions.

Below are steps to reproduce the issue:

step1 # dd if=/dev/zero of=tmp.raw bs=1M count=100
step2 # losetup -P /dev/loop0 tmp.raw
step3 # parted /dev/loop0 mklabel gpt
step4 # parted -a none -s /dev/loop0 mkpart primary 64s 1
step5 # losetup -d /dev/loop0

Step5 will not be able to delete /dev/loop0p1 (introduced by step4) and
there is below kernel warning message:

[ 464.414043] __loop_clr_fd: partition scan of loop0 failed (rc=-22)

This patch sets GENHD_FL_NO_PART_SCAN after blkdev_reread_part().

Fixes: 0da03cab87e6 ("loop: Fix deadlock when calling blkdev_reread_part()")
Signed-off-by: Dongli Zhang <dongli.zhang@xxxxxxxxxx>
---
Changed since v1:
* move the setting of lo->lo_state to Lo_unbound after partscan has finished as well
(suggested by Jan Kara)

drivers/block/loop.c | 26 ++++++++++++++++++++++----
1 file changed, 22 insertions(+), 4 deletions(-)

diff --git a/drivers/block/loop.c b/drivers/block/loop.c
index 7908673..a13f5dc 100644
--- a/drivers/block/loop.c
+++ b/drivers/block/loop.c
@@ -1034,6 +1034,16 @@ loop_init_xfer(struct loop_device *lo, struct loop_func_table *xfer,
return err;
}

+static void loop_disable_partscan(struct loop_device *lo)
+{
+ mutex_lock(&loop_ctl_mutex);
+ lo->lo_flags = 0;
+ if (!part_shift)
+ lo->lo_disk->flags |= GENHD_FL_NO_PART_SCAN;
+ lo->lo_state = Lo_unbound;
+ mutex_unlock(&loop_ctl_mutex);
+}
+
static int __loop_clr_fd(struct loop_device *lo, bool release)
{
struct file *filp = NULL;
@@ -1089,16 +1099,12 @@ static int __loop_clr_fd(struct loop_device *lo, bool release)
kobject_uevent(&disk_to_dev(bdev->bd_disk)->kobj, KOBJ_CHANGE);
}
mapping_set_gfp_mask(filp->f_mapping, gfp);
- lo->lo_state = Lo_unbound;
/* This is safe: open() is still holding a reference. */
module_put(THIS_MODULE);
blk_mq_unfreeze_queue(lo->lo_queue);

partscan = lo->lo_flags & LO_FLAGS_PARTSCAN && bdev;
lo_number = lo->lo_number;
- lo->lo_flags = 0;
- if (!part_shift)
- lo->lo_disk->flags |= GENHD_FL_NO_PART_SCAN;
loop_unprepare_queue(lo);
out_unlock:
mutex_unlock(&loop_ctl_mutex);
@@ -1121,6 +1127,18 @@ static int __loop_clr_fd(struct loop_device *lo, bool release)
/* Device is gone, no point in returning error */
err = 0;
}
+
+ /*
+ * lo->lo_state is set to Lo_unbound inside loop_disable_partscan()
+ * here after above partscan has finished.
+ *
+ * There cannot be anybody else entering __loop_clr_fd() as
+ * lo->lo_backing_file is already cleared and Lo_rundown state
+ * protects us from all the other places trying to change the 'lo'
+ * device.
+ */
+ loop_disable_partscan(lo);
+
/*
* Need not hold loop_ctl_mutex to fput backing file.
* Calling fput holding loop_ctl_mutex triggers a circular
--
2.7.4