Re: [PATCH] iio: adc: at91: disable adc channel interrupt in timeout case

[Ludovic Desroches]

On Wed, Jan 30, 2019 at 02:42:02PM +0100, g.ottinger@xxxxxxxxx wrote:
> From: Georg Ottinger <g.ottinger@xxxxxxxxx>
> 
> Having a brief look at at91_adc_read_raw() it is obvious that in the case
> of a timeout the setting of AT91_ADC_CHDR and AT91_ADC_IDR registers is
> omitted. If 2 different channels are queried we can end up with a
> situation where two interrupts are enabled, but only one interrupt is
> cleared in the interrupt handler. Resulting in a interrupt loop and a
> system hang.
> 
> Signed-off-by: Georg Ottinger <g.ottinger@xxxxxxxxx>
Acked-by: Ludovic Desroches <ludovic.desroches@xxxxxxxxxxxxx>

Thanks

> ---
>  drivers/iio/adc/at91_adc.c | 28 +++++++++++++++++-----------
>  1 file changed, 17 insertions(+), 11 deletions(-)
> 
> diff --git a/drivers/iio/adc/at91_adc.c b/drivers/iio/adc/at91_adc.c
> index 75d2f7358..596841a3c 100644
> --- a/drivers/iio/adc/at91_adc.c
> +++ b/drivers/iio/adc/at91_adc.c
> @@ -704,23 +704,29 @@ static int at91_adc_read_raw(struct iio_dev *idev,
>  		ret = wait_event_interruptible_timeout(st->wq_data_avail,
>  						       st->done,
>  						       msecs_to_jiffies(1000));
> -		if (ret == 0)
> -			ret = -ETIMEDOUT;
> -		if (ret < 0) {
> -			mutex_unlock(&st->lock);
> -			return ret;
> -		}
> -
> -		*val = st->last_value;
>  
> +		/* Disable interrupts, regardless if adc conversion was
> +		 * successful or not
> +		 */
>  		at91_adc_writel(st, AT91_ADC_CHDR,
>  				AT91_ADC_CH(chan->channel));
>  		at91_adc_writel(st, AT91_ADC_IDR, BIT(chan->channel));
>  
> -		st->last_value = 0;
> -		st->done = false;
> +		if (ret > 0) {
> +			/* a valid conversion took place */
> +			*val = st->last_value;
> +			st->last_value = 0;
> +			st->done = false;
> +			ret = IIO_VAL_INT;
> +		} else if (ret == 0) {
> +			/* conversion timeout */
> +			dev_err(&idev->dev, "ADC Channel %d timeout.\n",
> +				chan->channel);
> +			ret = -ETIMEDOUT;
> +		}
> +
>  		mutex_unlock(&st->lock);
> -		return IIO_VAL_INT;
> +		return ret;
>  
>  	case IIO_CHAN_INFO_SCALE:
>  		*val = st->vref_mv;
> -- 
> 2.17.1
> 
> 
> _______________________________________________
> linux-arm-kernel mailing list
> linux-arm-kernel@xxxxxxxxxxxxxxxxxxx
> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel