Re: [PATCH v5 0/5] M_CAN Framework re-write
From: Dan Murphy
Date: Fri Feb 22 2019 - 07:50:37 EST
Wolfgang
On 2/22/19 3:38 AM, Wolfgang Grandegger wrote:
> Hello Dan,
>
> what kernel version is that patch series for. I have problems to apply it!
>
It is based off of Master
commit 2137397c92aec3713fa10be3c9b830f9a1674e60 (linux_master/master)
And I successfully rebased on top of
commit 8a61716ff2ab23eddd1f7a05a075a374e4d0c3d4 (linux_master/master)
Merge tag 'ceph-for-5.0-rc8' of git://github.com/ceph/ceph-client
Dan
> Wolfgang.
>
> Am 21.02.19 um 17:41 schrieb Wolfgang Grandegger:
>> Hello Dan,
>>
>> I will have a closer look end of this week!
>>
>> Wolfgang.
>>
>> Am 21.02.19 um 17:24 schrieb Dan Murphy:
>>> Bump
>>>
>>> On 2/14/19 12:27 PM, Dan Murphy wrote:
>>>> Hello
>>>>
>>>> OK I did not give up on this patch series just got a little preoccupied with
>>>> some other kernel work. But here is the update per the comments.
>>>>
>>>> It should be understood I broke these out for reviewability.
>>>> For instance the first patch does not compile on its own as including this
>>>> patch should not change the current functionality and it pulls all the io-mapped
>>>> code from the m_can base file to a platfrom file.
>>>>
>>>> The next patch "Migrate the m_can code to use the framework"
>>>> is the change to the kernel for the io-mapped conversion from a flat file to use
>>>> the framework. Finally the rename patch just renames the m_can_priv to
>>>> m_can_classdev. I broke this change out specifically for readability of the
>>>> migration patch per comments on the code.
>>>>
>>>> AFAIC the first 3 patches can all be squashed into a single patch. Or the
>>>> first 2 patches in the series can be re-arranged but then m_can functionality is
>>>> affected in the migration patch.
>>>>
>>>> Again the first 3 patches here are all just for readability and review purposes.
>>>>
>>>> Dan
>>>>
>>>> Dan Murphy (5):
>>>> can: m_can: Create a m_can platform framework
>>>> can: m_can: Migrate the m_can code to use the framework
>>>> can: m_can: Rename m_can_priv to m_can_classdev
>>>> dt-bindings: can: tcan4x5x: Add DT bindings for TCAN4x5X driver
>>>> can: tcan4x5x: Add tcan4x5x driver to the kernel
>>>>
>>>> .../devicetree/bindings/net/can/tcan4x5x.txt | 37 +
>>>> drivers/net/can/m_can/Kconfig | 14 +-
>>>> drivers/net/can/m_can/Makefile | 2 +
>>>> drivers/net/can/m_can/m_can.c | 788 +++++++++---------
>>>> drivers/net/can/m_can/m_can.h | 159 ++++
>>>> drivers/net/can/m_can/m_can_platform.c | 198 +++++
>>>> drivers/net/can/m_can/tcan4x5x.c | 531 ++++++++++++
>>>> 7 files changed, 1320 insertions(+), 409 deletions(-)
>>>> create mode 100644 Documentation/devicetree/bindings/net/can/tcan4x5x.txt
>>>> create mode 100644 drivers/net/can/m_can/m_can.h
>>>> create mode 100644 drivers/net/can/m_can/m_can_platform.c
>>>> create mode 100644 drivers/net/can/m_can/tcan4x5x.c
>>>>
>>>
>>>
--
------------------
Dan Murphy