Re: [PATCH 3/3] imx8mq.dtsi: add the sdma nodes

[Daniel Baluta]

Hi Angus,

What is the status of this patch? Most likely this should go through
Shwan's tree.

I noticed that I have also sent a similar patch to Shawn:
https://www.spinics.net/lists/arm-kernel/msg708424.html

So, lets coordinate and work better on this.

I am now preparing another series where I add SAI nodes and enable WM
codec on imx8MQ.

If you don't mind I will pick your relevant changes from this patch
and add them to my series, then send them to Shawn.

thanks,
Daniel.

On Sun, Jan 20, 2019 at 4:05 AM Angus Ainslie (Purism) <angus@xxxxxxxx> wrote:
>
> Add the sdma nodes to the base devicetree for the imx8mq
>
> Signed-off-by: Angus Ainslie (Purism) <angus@xxxxxxxx>
> ---
>  arch/arm64/boot/dts/freescale/imx8mq.dtsi | 31 +++++++++++++++++++++++
>  1 file changed, 31 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/freescale/imx8mq.dtsi b/arch/arm64/boot/dts/freescale/imx8mq.dtsi
> index c0402375e7c1..0b9a9b5ae7b7 100644
> --- a/arch/arm64/boot/dts/freescale/imx8mq.dtsi
> +++ b/arch/arm64/boot/dts/freescale/imx8mq.dtsi
> @@ -336,6 +336,19 @@
>                                 clocks = <&clk IMX8MQ_CLK_WDOG3_ROOT>;
>                                 status = "disabled";
>                         };
> +
> +                       sdma2: sdma@302c0000 {
> +                               compatible = "fsl,imx8mq-sdma", "fsl,imx7d-sdma";
> +                               reg = <0x302c0000 0x10000>;
> +                               interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
> +                               clocks = <&clk IMX8MQ_CLK_SDMA2_ROOT>,
> +                                       <&clk IMX8MQ_CLK_SDMA2_ROOT>;
> +                               clock-names = "ipg", "ahb";
> +                               #dma-cells = <3>;
> +                               fsl,sdma-ram-script-name = "imx/sdma/sdma-imx7d.bin";
> +                               fsl,ratio-1-1;
> +                               status = "disabled";
> +                       };
>                 };
>
>                 bus@30400000 { /* AIPS2 */
> @@ -370,6 +383,8 @@
>                                 clocks = <&clk IMX8MQ_CLK_UART3_ROOT>,
>                                          <&clk IMX8MQ_CLK_UART3_ROOT>;
>                                 clock-names = "ipg", "per";
> +                               dmas = <&sdma1 26 4 0>, <&sdma1 27 4 0>;
> +                               dma-names = "rx", "tx";
>                                 status = "disabled";
>                         };
>
> @@ -381,6 +396,8 @@
>                                 clocks = <&clk IMX8MQ_CLK_UART2_ROOT>,
>                                          <&clk IMX8MQ_CLK_UART2_ROOT>;
>                                 clock-names = "ipg", "per";
> +                               dmas = <&sdma1 24 4 0>, <&sdma1 25 4 0>;
> +                               dma-names = "rx", "tx";
>                                 status = "disabled";
>                         };
>
> @@ -432,6 +449,8 @@
>                                 clocks = <&clk IMX8MQ_CLK_UART4_ROOT>,
>                                          <&clk IMX8MQ_CLK_UART4_ROOT>;
>                                 clock-names = "ipg", "per";
> +                               dmas = <&sdma1 28 4 0>, <&sdma1 29 4 0>;
> +                               dma-names = "rx", "tx";
>                                 status = "disabled";
>                         };
>
> @@ -465,6 +484,18 @@
>                                 status = "disabled";
>                         };
>
> +                       sdma1: sdma@30bd0000 {
> +                               compatible = "fsl,imx8mq-sdma", "fsl,imx7d-sdma";
> +                               reg = <0x30bd0000 0x10000>;
> +                               interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
> +                               clocks = <&clk IMX8MQ_CLK_SDMA1_ROOT>,
> +                                       <&clk IMX8MQ_CLK_SDMA1_ROOT>;
> +                               clock-names = "ipg", "ahb";
> +                               #dma-cells = <3>;
> +                               fsl,sdma-ram-script-name = "imx/sdma/sdma-imx7d.bin";
> +                               status = "disabled";
> +                       };
> +
>                         fec1: ethernet@30be0000 {
>                                 compatible = "fsl,imx8mq-fec", "fsl,imx6sx-fec";
>                                 reg = <0x30be0000 0x10000>;
> --
> 2.17.1
>