Re: [PATCH 2/3] dt-bindings: net: btusb: add QCA6174A IDs

[Robin Murphy]

On 2019-02-22 12:34 am, Brian Norris wrote:
> There are two USB PID/VID variations I've seen for this chip, and I want
> to utilize the 'interrupts' property defined here already.
>
> Signed-off-by: Brian Norris <briannorris@xxxxxxxxxxxx>
> ---
>   Documentation/devicetree/bindings/net/btusb.txt | 3 +++
>   1 file changed, 3 insertions(+)
>
> diff --git a/Documentation/devicetree/bindings/net/btusb.txt b/Documentation/devicetree/bindings/net/btusb.txt
> index 37d67926dd6d..43c96c3380a6 100644
> --- a/Documentation/devicetree/bindings/net/btusb.txt
> +++ b/Documentation/devicetree/bindings/net/btusb.txt
> @@ -9,6 +9,9 @@ Required properties:
>   		 (more may be added later) are:
>   
>   		  "usb1286,204e" (Marvell 8997)
> +		  "usb0cf3,e300" (Qualcomm QCA6174A)
> +		  "usb04ca,301a" (Qualcomm QCA6174A (Lite-On))

Nit: the USB device binding states that those leading zeroes in the VIDs 
should be suppressed.

Otherwise, thanks for the tip-off - I hadn't realised that OOB interrupt 
support was fully implemented already. I'll have to give this a go for 
the Realtek module in one of my TV boxes :)

Robin.

> +
>   
>   Also, vendors that use btusb may have device additional properties, e.g:
>   Documentation/devicetree/bindings/net/marvell-bt-8xxx.txt