[PATCH net-next v2 1/7] net: phy: marvell10g: Use get_features to get the PHY abilities
From: Maxime Chevallier
Date: Fri Feb 22 2019 - 18:38:01 EST
The Alaska family of 10G PHYs has more abilities than the ones listed in
PHY_10GBIT_FULL_FEATURES, the exact list depending on the model.
Make use of the newly introduced .get_features call to build this list,
using genphy_c45_pma_read_abilities to build the list of supported
linkmodes, and adding autoneg ability based on what's reported by the AN
MMD.
.config_init is still used to validate the interface_mode.
Signed-off-by: Maxime Chevallier <maxime.chevallier@xxxxxxxxxxx>
---
V2: Added missing blank line
drivers/net/phy/marvell10g.c | 11 ++++++++---
1 file changed, 8 insertions(+), 3 deletions(-)
diff --git a/drivers/net/phy/marvell10g.c b/drivers/net/phy/marvell10g.c
index 586ae1bc5a50..89920b10d75b 100644
--- a/drivers/net/phy/marvell10g.c
+++ b/drivers/net/phy/marvell10g.c
@@ -233,8 +233,6 @@ static int mv3310_resume(struct phy_device *phydev)
static int mv3310_config_init(struct phy_device *phydev)
{
- int ret, val;
-
/* Check that the PHY interface type is compatible */
if (phydev->interface != PHY_INTERFACE_MODE_SGMII &&
phydev->interface != PHY_INTERFACE_MODE_XAUI &&
@@ -242,6 +240,13 @@ static int mv3310_config_init(struct phy_device *phydev)
phydev->interface != PHY_INTERFACE_MODE_10GKR)
return -ENODEV;
+ return 0;
+}
+
+static int mv3310_get_features(struct phy_device *phydev)
+{
+ int ret, val;
+
if (phydev->c45_ids.devices_in_package & MDIO_DEVS_AN) {
val = phy_read_mmd(phydev, MDIO_MMD_AN, MDIO_STAT1);
if (val < 0)
@@ -416,7 +421,7 @@ static struct phy_driver mv3310_drivers[] = {
.phy_id = 0x002b09aa,
.phy_id_mask = MARVELL_PHY_ID_MASK,
.name = "mv88x3310",
- .features = PHY_10GBIT_FEATURES,
+ .get_features = mv3310_get_features,
.soft_reset = gen10g_no_soft_reset,
.config_init = mv3310_config_init,
.probe = mv3310_probe,
--
2.19.2