RE: [PATCH 1/3] clk: imx8mq: initialize clock tree earlier

[Anson Huang]

Best Regards!
Anson Huang

> -----Original Message-----
> From: Anson Huang
> Sent: 2019å2æ23æ 11:04
> To: Lucas Stach <l.stach@xxxxxxxxxxxxxx>; robh+dt@xxxxxxxxxx;
> mark.rutland@xxxxxxx; shawnguo@xxxxxxxxxx; s.hauer@xxxxxxxxxxxxxx;
> kernel@xxxxxxxxxxxxxx; festevam@xxxxxxxxx; mturquette@xxxxxxxxxxxx;
> sboyd@xxxxxxxxxx; Abel Vesa <abel.vesa@xxxxxxx>; ccaione@xxxxxxxxxxxx;
> agx@xxxxxxxxxxx; devicetree@xxxxxxxxxxxxxxx; linux-arm-
> kernel@xxxxxxxxxxxxxxxxxxx; linux-kernel@xxxxxxxxxxxxxxx; linux-
> clk@xxxxxxxxxxxxxxx
> Cc: dl-linux-imx <linux-imx@xxxxxxx>
> Subject: RE: [PATCH 1/3] clk: imx8mq: initialize clock tree earlier
> 
> Hi, Lucas
> 
> Best Regards!
> Anson Huang
> 
> > -----Original Message-----
> > From: Lucas Stach [mailto:l.stach@xxxxxxxxxxxxxx]
> > Sent: 2019å2æ22æ 18:55
> > To: Anson Huang <anson.huang@xxxxxxx>; robh+dt@xxxxxxxxxx;
> > mark.rutland@xxxxxxx; shawnguo@xxxxxxxxxx; s.hauer@xxxxxxxxxxxxxx;
> > kernel@xxxxxxxxxxxxxx; festevam@xxxxxxxxx; mturquette@xxxxxxxxxxxx;
> > sboyd@xxxxxxxxxx; Abel Vesa <abel.vesa@xxxxxxx>;
> ccaione@xxxxxxxxxxxx;
> > agx@xxxxxxxxxxx; devicetree@xxxxxxxxxxxxxxx; linux-arm-
> > kernel@xxxxxxxxxxxxxxxxxxx; linux-kernel@xxxxxxxxxxxxxxx; linux-
> > clk@xxxxxxxxxxxxxxx
> > Cc: dl-linux-imx <linux-imx@xxxxxxx>
> > Subject: Re: [PATCH 1/3] clk: imx8mq: initialize clock tree earlier
> >
> > Am Freitag, den 22.02.2019, 09:42 +0000 schrieb Anson Huang:
> > > Currently on i.MX8MQ platform, clock driver is probed later than
> > > GPIO driver, and GPIO driver does NOT have defer probe mechanism
> > > since the GPIO clock is optional,
> >
> > So this is what should be fixed. If there is a clock reference in the
> > DT, having the clock driver ready is not optional. Optional to the
> > GPIO driver just means it won't fail if there is no clock reference at all.
> > If there is and the clock provider is not yet there, it needs to do a
> > PROBE_DEFER.
> >
> > So that's a NACK on this patch.
> 
> OK, I see. Then I will do a patch for GPIO driver, and I just check other drivers,
> looks like imx2 watchdog driver also has similar issue, I will do a patch too.

Just double check the watch dog driver, its clock is NOT optional, and just return
the error value, so it should be OK, sorry for the noise.

Anson.

> 
> Thanks,
> Anson.
> 
> >
> > Regards,
> > Lucas
> >
> > > some platforms have GPIO clocks and some are NOT. So it is an issue
> > > that on i.MX8MQ platform, there are GPIO clocks defined, but due to
> > > clock tree is NOT ready during GPIO driver probe, the GPIO clock
> > > management will fail and cause system hang if GPIO clocks are OFF by
> > > default.
> > >
> > > This patch changes the i.MX8MQ clock tree initialization using
> > > CLK_OF_DECLARE instead of platform driver model to make clock tree
> > > ready earlier than GPIO driver.
> > >
> > > Signed-off-by: Anson Huang <Anson.Huang@xxxxxxx>
> > > ---
> > >  drivers/clk/imx/clk-imx8mq.c | 33 +++++++--------------------------
> > >  1 file changed, 7 insertions(+), 26 deletions(-)
> > >
> > > diff --git a/drivers/clk/imx/clk-imx8mq.c b/drivers/clk/imx/clk-
> > > imx8mq.c index 26b57f4..2df1575 100644
> > > --- a/drivers/clk/imx/clk-imx8mq.c
> > > +++ b/drivers/clk/imx/clk-imx8mq.c
> > > @@ -269,10 +269,9 @@ static const char *imx8mq_clko2_sels[] =
> > > {"osc_25m", "sys2_pll_200m", "sys1_pll_
> > >
> > >  static struct clk_onecell_data clk_data;
> > >
> > > -static int imx8mq_clocks_probe(struct platform_device *pdev)
> > > +static void __init imx8mq_clocks_init(struct device_node *np)
> > >  {
> > > -	struct device *dev = &pdev->dev;
> > > -	struct device_node *np = dev->of_node;
> > > +	struct device_node *anatop_np;
> > >  	void __iomem *base;
> > >  	int err;
> > >  	int i;
> > > @@ -286,10 +285,10 @@ static int imx8mq_clocks_probe(struct
> > > platform_device *pdev)
> > >  	clks[IMX8MQ_CLK_EXT3] = of_clk_get_by_name(np, "clk_ext3");
> > >  	clks[IMX8MQ_CLK_EXT4] = of_clk_get_by_name(np, "clk_ext4");
> > >
> > > -	np = of_find_compatible_node(NULL, NULL, "fsl,imx8mq-anatop");
> > > -	base = of_iomap(np, 0);
> > > +	anatop_np = of_find_compatible_node(NULL, NULL, "fsl,imx8mq-
> > > anatop");
> > > +	base = of_iomap(anatop_np, 0);
> > >  	if (WARN_ON(!base))
> > > -		return -ENOMEM;
> > > +		return;
> > >
> > >  	clks[IMX8MQ_ARM_PLL_REF_SEL] = imx_clk_mux("arm_pll_ref_sel",
> > base +
> > > 0x28, 16, 2, pll_ref_sels, ARRAY_SIZE(pll_ref_sels));
> > >  	clks[IMX8MQ_GPU_PLL_REF_SEL] = imx_clk_mux("gpu_pll_ref_sel",
> > base +
> > > 0x18, 16, 2, pll_ref_sels, ARRAY_SIZE(pll_ref_sels)); @@ -389,10
> > > +388,9 @@ static int imx8mq_clocks_probe(struct platform_device
> > > +*pdev)
> > >  	clks[IMX8MQ_SYS2_PLL_500M] =
> > > imx_clk_fixed_factor("sys2_pll_500m", "sys2_pll_out", 1, 2);
> > >  	clks[IMX8MQ_SYS2_PLL_1000M] =
> > > imx_clk_fixed_factor("sys2_pll_1000m", "sys2_pll_out", 1, 1);
> > >
> > > -	np = dev->of_node;
> > >  	base = of_iomap(np, 0);
> > >  	if (WARN_ON(!base))
> > > -		return -ENOMEM;
> > > +		return;
> > >
> > >  	/* CORE */
> > >  	clks[IMX8MQ_CLK_A53_SRC] = imx_clk_mux2("arm_a53_src", base +
> > > 0x8000, 24, 3, imx8mq_a53_sels, ARRAY_SIZE(imx8mq_a53_sels)); @@
> > > -568,22 +566,5 @@ static int imx8mq_clocks_probe(struct
> > > platform_device *pdev)
> > >
> > >  	err = of_clk_add_provider(np, of_clk_src_onecell_get, &clk_data);
> > >  	WARN_ON(err);
> > > -
> > > -	return err;
> > >  }
> > > -
> > > -static const struct of_device_id imx8mq_clk_of_match[] = {
> > > -	{ .compatible = "fsl,imx8mq-ccm" },
> > > -	{ /* Sentinel */ },
> > > -};
> > > -MODULE_DEVICE_TABLE(of, imx8mq_clk_of_match);
> > > -
> > > -
> > > -static struct platform_driver imx8mq_clk_driver = {
> > > -	.probe = imx8mq_clocks_probe,
> > > -	.driver = {
> > > -		.name = "imx8mq-ccm",
> > > -		.of_match_table = of_match_ptr(imx8mq_clk_of_match),
> > > -	},
> > > -};
> > > -module_platform_driver(imx8mq_clk_driver);
> > > +CLK_OF_DECLARE(imx8mq, "fsl,imx8mq-ccm", imx8mq_clocks_init);