Re: [PATCH V8 1/4] dt-bindings: fsl: scu: add thermal binding

[Eduardo Valentin]

On Thu, Feb 21, 2019 at 06:38:30AM +0000, Anson Huang wrote:
> NXP i.MX8QXP is an ARMv8 SoC with a Cortex-M4 core inside as
> system controller, the system controller is in charge of system
> power, clock and thermal sensors etc. management, Linux kernel
> has to communicate with system controller via MU (message unit)
> IPC to get temperature from thermal sensors, this patch adds
> binding doc for i.MX system controller thermal driver.
> 
> Signed-off-by: Anson Huang <Anson.Huang@xxxxxxx>
> Reviewed-by: Rob Herring <robh@xxxxxxxxxx>
> ---
> Changes since V7:
>         - remove unused property "tsens-num";
>         - improve the compatible description;
>         - update examples according to latest dts file.
> ---
>  .../devicetree/bindings/arm/freescale/fsl,scu.txt     | 19 +++++++++++++++++++
>  1 file changed, 19 insertions(+)
> 
> diff --git a/Documentation/devicetree/bindings/arm/freescale/fsl,scu.txt b/Documentation/devicetree/bindings/arm/freescale/fsl,scu.txt
> index 72d481c..d89147e 100644
> --- a/Documentation/devicetree/bindings/arm/freescale/fsl,scu.txt
> +++ b/Documentation/devicetree/bindings/arm/freescale/fsl,scu.txt
> @@ -122,6 +122,19 @@ RTC bindings based on SCU Message Protocol
>  Required properties:
>  - compatible: should be "fsl,imx8qxp-sc-rtc";
>  
> +Thermal bindings based on SCU Message Protocol
> +------------------------------------------------------------
> +
> +Required properties:
> +- compatible:			Should be :
> +				  "fsl,imx8qxp-sc-thermal"
> +				followed by "fsl,imx-sc-thermal";
> +
> +- #thermal-sensor-cells:	See Documentation/devicetree/bindings/thermal/thermal.txt
> +				for a description.
> +
> +- imx,sensor-resource-id: 	Property array to specify each thermal zone's sensor resource ID.

If this is an array...

> +
>  Example (imx8qxp):
>  -------------
>  lsio_mu1: mailbox@5d1c0000 {
> @@ -168,6 +181,12 @@ firmware {
>  		rtc: rtc {
>  			compatible = "fsl,imx8qxp-sc-rtc";
>  		};
> +
> +		tsens: thermal-sensor {
> +			compatible = "fsl,imx8qxp-sc-thermal", "fsl,imx-sc-thermal";
> +			#thermal-sensor-cells = <0>;
> +			imx,sensor-resource-id = <IMX_SC_R_SYSTEM>;

then this example should have an array, to be better express how this is
supposed to work. Can you please resend this with an array instead?

> +		};
>  	};
>  };
>  
> -- 
> 2.7.4
>