[PATCH v5 0/3] UFS on APQ8098/MSM8998

[Marc Gonzalez]

Hello,

This series adds support for the UFS host controller on APQ8098/MSM8998-based boards.

This should be the final rev ;-)

Differences between v4 and v5:
- Drop patches that have already been accepted or spun off

Differences between v3 and v4:
- Rebase on top of -next
- Pick up Douglas Anderson's UFSHC doc fix
- Document 8998 UFSHC binding
- Improve UFS PHY binding doc
- Put the UFS DT patch at the end of the series

Difference between v2 and v3:
- Add qcom,msm8998-qmp-ufs-phy compat string and match it in the PHY driver
- Drop vdd-hba-fixed-regulator
- Write the reg addresses with full 32-bit width
- Set regulator-allow-set-load only on the 3 rails used by UFS.
- Revert the patch introducing ufshcd_set_vccq_rail_unused

Difference between v1 and v2:
- New patch to add 'regulator-allow-set-load' prop to all vreg nodes
- Rename rpmcc node to 'clock-controller' + Add Review tags
- Drop UFS pinctrl gymnastics (not required, probably left enabled in bootloader)
- Delete GCC_UFS_ICE_CORE_CLK (ICE not used upstream, I think)
- Fix sizes of ufsphy register areas based on Jeffrey's feedback
- Hack ufshcd_set_vccq_rail_unused into a NOP to work around lock up + reboot


Marc Gonzalez (3):
  dt-bindings: ufs: Add msm8998 compatible string
  arm64: dts: qcom: msm8998: Allow UFSHC driver to set-load
  arm64: dts: qcom: msm8998: Add UFS nodes

 .../devicetree/bindings/ufs/ufshcd-pltfrm.txt |  1 +
 arch/arm64/boot/dts/qcom/msm8998-mtp.dtsi     | 22 +++++++
 arch/arm64/boot/dts/qcom/msm8998.dtsi         | 65 +++++++++++++++++++
 3 files changed, 88 insertions(+)

-- 
2.17.1