Re: [PATCH v7] PCI: imx6: limit DBI register length

[Bjorn Helgaas]

[+cc Thinh]

On Mon, Feb 25, 2019 at 10:52 AM Trent Piepho <tpiepho@xxxxxxxxxx> wrote:
> On Mon, 2019-02-25 at 16:15 +0000, Leonard Crestez wrote:
> > On Mon, 2019-02-25 at 17:02 +0100, Stefan Agner wrote:
> > > Define the length of the DBI registers and limit config space to its
> > > length. This makes sure that the kernel does not access registers
> > > beyond that point, avoiding the following abort on a i.MX 6Quad:
> > >
> > > +static void imx6_pcie_quirk(struct pci_dev *dev)
> > > +{
> > > +   struct pci_bus *bus = dev->bus;
> > > +   struct pcie_port *pp = bus->sysdata;
> > > +
> > > +   if (bus->number == pp->root_bus_nr) {
> > > +           struct dw_pcie *pci = to_dw_pcie_from_pp(pp);
> > > +           struct imx6_pcie *imx6_pcie = to_imx6_pcie(pci);
> > > +
> > > +           /*
> > > +            * Limit config length to avoid the kernel reading beyond
> > > +            * the register set and causing an abort on i.MX 6Quad
> > > +            */
> > > +           if (imx6_pcie->drvdata->dbi_length)
> > > +                   dev->cfg_size = imx6_pcie->drvdata->dbi_length;
> > > +   }
> > > +}
> > > +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_SYNOPSYS, 0xabcd, imx6_pcie_quirk);
> >
> > This looks like a default from SYNOPSYS so it likely run on other SOCs
> > using the DesignWare PCI IP and crash because of those unchecked casts.
>
> Yes, it's used on IMX7d too.  But it's worse than that, there's a USB
> controller core that uses the same vendor and device id,
> PCI_DEVICE_ID_SYNOPSYS_HAPSUSB3.  The quirk for that one uses class ==
> PCI_CLASS_SERIAL_USB_DEVICE to avoid matching this PCI-e IP.  See
> thread "PCI: Check for USB xHCI class for HAPS platform"

If we could get these vendors to allocate their own Vendor/Device IDs,
maybe we could consider a DECLARE_PCI_FIXUP_EARLY quirk that would fix
up pdev->vendor and pdev->device?  That might be cleaner than
cluttering all these quirks with details of this screwup.

Bjorn