[PATCH v1 1/1] mtd: devices: add ACPI support for non-jedec m25p80

[Flavio Suligoi]

For the x86 machines a m25p80-compatible device have to be declared using
an ACPI table (which can be directly a part of the BIOS ACPI tables).

In this case it is necessary to add the device in the "of_device_id" structure
list, to permit the device name matching by the ACPI kernel functions.

This is an example of a SSDT table for the Everspin mr25h40:

DefinitionBlock ("mr25h40.aml", "SSDT", 5, "ASEMsp", "MR25H40", 1)
{
	External (_SB.SPI1, DeviceObj)

	Scope (\_SB.SPI1)
	{
		Device (NVR0)
		{
			Name (_HID, "PRP0001")
			Name (_DDN, "Everspin MR25H40 MRAM")
			Name (_CRS, ResourceTemplate () {
				SpiSerialBus (
				1,                      // Chip select
				PolarityLow,            // Chip select is active low
				FourWireMode,           // Full duplex
				8,                      // Bits per word is 8 (byte)
				ControllerInitiated,    // Don't care
				10000000,               // 10 MHz
				ClockPolarityLow,       // SPI mode 0 ClockPolarityLow
				ClockPhaseFirst,        // SPI mode 0 ClockPhaseFirst
				"\\_SB.SPI1",      	// SPI host controller
				0,			// Must be 0
				ResourceConsumer,
				,
				)
			})

			Name (_DSD, Package () {
				ToUUID("daffd814-6eba-4d8c-8a91-bc9bbf4aa301"),
				Package () {
					Package () {"compatible", "mr25h40"},
				}
			})
		}
	}
}

Signed-off-by: Flavio Suligoi <f.suligoi@xxxxxxx>
---

v1: - first patch version

 drivers/mtd/devices/m25p80.c | 57 +++++++++++++++++++++++++++++++++++++++++++-
 1 file changed, 56 insertions(+), 1 deletion(-)

diff --git a/drivers/mtd/devices/m25p80.c b/drivers/mtd/devices/m25p80.c
index c4a1d04..b5c7db8 100644
--- a/drivers/mtd/devices/m25p80.c
+++ b/drivers/mtd/devices/m25p80.c
@@ -312,9 +312,64 @@ MODULE_DEVICE_TABLE(spi, m25p_ids);
 static const struct of_device_id m25p_of_table[] = {
 	/*
 	 * Generic compatibility for SPI NOR that can be identified by the
-	 * JEDEC READ ID opcode (0x9F). Use this, if possible.
+	 * JEDEC READ ID opcode (0x9F). Use this (jedec,spi-nor), if possible.
+	 *
+	 * The list of all flash devices is instead necessary in x86 machines,
+	 * to use a "non-jedec device" inside the ACPI BIOS tables.
 	 */
 	{ .compatible = "jedec,spi-nor" },
+	{ .compatible = "s25sl064a" },
+	{ .compatible = "w25x16" },
+	{ .compatible = "m25p10" },
+	{ .compatible = "m25px64" },
+	{ .compatible = "at25df321a" },
+	{ .compatible = "at25df641" },
+	{ .compatible = "at26df081a" },
+	{ .compatible = "mx25l4005a" },
+	{ .compatible = "mx25l1606e" },
+	{ .compatible = "mx25l6405d" },
+	{ .compatible = "mx25l12805d" },
+	{ .compatible = "mx25l25635e" },
+	{ .compatible = "mx66l51235l" },
+	{ .compatible = "n25q064" },
+	{ .compatible = "n25q128a11" },
+	{ .compatible = "n25q128a13" },
+	{ .compatible = "n25q512a" },
+	{ .compatible = "s25fl256s1" },
+	{ .compatible = "s25fl512s" },
+	{ .compatible = "s25sl12801" },
+	{ .compatible = "s25fl008k" },
+	{ .compatible = "s25fl064k" },
+	{ .compatible = "sst25vf040b" },
+	{ .compatible = "sst25vf016b" },
+	{ .compatible = "sst25vf032b" },
+	{ .compatible = "sst25wf040" },
+	{ .compatible = "m25p40" },
+	{ .compatible = "m25p80" },
+	{ .compatible = "m25p16" },
+	{ .compatible = "m25p32" },
+	{ .compatible = "m25p64" },
+	{ .compatible = "m25p128" },
+	{ .compatible = "w25x80" },
+	{ .compatible = "w25x32" },
+	{ .compatible = "w25q32" },
+	{ .compatible = "w25q32dw" },
+	{ .compatible = "w25q80bl" },
+	{ .compatible = "w25q128" },
+	{ .compatible = "w25q256" },
+	{ .compatible = "m25p05-nonjedec" },
+	{ .compatible = "m25p10-nonjedec" },
+	{ .compatible = "m25p20-nonjedec" },
+	{ .compatible = "m25p40-nonjedec" },
+	{ .compatible = "m25p80-nonjedec" },
+	{ .compatible = "m25p16-nonjedec" },
+	{ .compatible = "m25p32-nonjedec" },
+	{ .compatible = "m25p64-nonjedec" },
+	{ .compatible = "m25p128-nonjedec" },
+	{ .compatible = "mr25h128" },
+	{ .compatible = "mr25h256" },
+	{ .compatible = "mr25h10" },
+	{ .compatible = "mr25h40" },
 	{}
 };
 MODULE_DEVICE_TABLE(of, m25p_of_table);
-- 
2.7.4