Re: [PATCH 07/11] regulator: max77650: Convert to use regulator_set/get_current_limit_regmap

From: Bartosz Golaszewski
Date: Thu Feb 28 2019 - 09:11:37 EST

czw., 28 lut 2019 o 14:41 Axel Lin <axel.lin@xxxxxxxxxx> napisaÅ(a):
>
> Use regulator_set/get_current_limit_regmap helpers to save some code.
>
> Signed-off-by: Axel Lin <axel.lin@xxxxxxxxxx>
> ---
> drivers/regulator/max77650-regulator.c | 74 +++++++++-----------------
> 1 file changed, 25 insertions(+), 49 deletions(-)
>
> diff --git a/drivers/regulator/max77650-regulator.c b/drivers/regulator/max77650-regulator.c
> index a1af414db751..31ebf34b01ec 100644
> --- a/drivers/regulator/max77650-regulator.c
> +++ b/drivers/regulator/max77650-regulator.c
> @@ -26,9 +26,6 @@
> #define MAX77650_REGULATOR_AD_ENABLED BIT(3)
>
> #define MAX77650_REGULATOR_CURR_LIM_MASK GENMASK(7, 6)
> -#define MAX77650_REGULATOR_CURR_LIM_BITS(_reg) \
> - (((_reg) & MAX77650_REGULATOR_CURR_LIM_MASK) >> 6)
> -#define MAX77650_REGULATOR_CURR_LIM_SHIFT(_val) ((_val) << 6)
>
> enum {
> MAX77650_REGULATOR_ID_LDO = 0,
> @@ -82,7 +79,7 @@ static const u32 max77651_sbb1_regulator_volt_table[] = {
> _val = MAX77651_REGULATOR_SBB1_SEL_ENC(_val); \
> } while (0)
>
> -static const int max77650_current_limit_table[] = {
> +static const unsigned int max77650_current_limit_table[] = {
> 1000000, 866000, 707000, 500000,
> };
>
> @@ -220,47 +217,6 @@ static int max77651_regulator_sbb1_set_voltage_sel(struct regulator_dev *rdev,
> return 0;
> }
>
> -static int max77650_regulator_get_current_limit(struct regulator_dev *rdev)
> -{
> - struct max77650_regulator_desc *rdesc;
> - struct regmap *map;
> - int val, rv, limit;
> -
> - rdesc = rdev_get_drvdata(rdev);
> - map = rdev_get_regmap(rdev);
> -
> - rv = regmap_read(map, rdesc->regA, &val);
> - if (rv)
> - return rv;
> -
> - limit = MAX77650_REGULATOR_CURR_LIM_BITS(val);
> -
> - return max77650_current_limit_table[limit];
> -}
> -
> -static int max77650_regulator_set_current_limit(struct regulator_dev *rdev,
> - int min_uA, int max_uA)
> -{
> - struct max77650_regulator_desc *rdesc;
> - struct regmap *map;
> - int i, limit;
> -
> - rdesc = rdev_get_drvdata(rdev);
> - map = rdev_get_regmap(rdev);
> -
> - for (i = 0; i < ARRAY_SIZE(max77650_current_limit_table); i++) {
> - limit = max77650_current_limit_table[i];
> -
> - if (limit >= min_uA && limit <= max_uA) {
> - return regmap_update_bits(map, rdesc->regA,
> - MAX77650_REGULATOR_CURR_LIM_MASK,
> - MAX77650_REGULATOR_CURR_LIM_SHIFT(i));
> - }
> - }
> -
> - return -EINVAL;
> -}
> -
> static const struct regulator_ops max77650_regulator_LDO_ops = {
> .is_enabled = max77650_regulator_is_enabled,
> .enable = max77650_regulator_enable,
> @@ -280,8 +236,8 @@ static const struct regulator_ops max77650_regulator_SBB_ops = {
> .map_voltage = regulator_map_voltage_linear,
> .get_voltage_sel = regulator_get_voltage_sel_regmap,
> .set_voltage_sel = max77650_regulator_set_voltage_sel,
> - .get_current_limit = max77650_regulator_get_current_limit,
> - .set_current_limit = max77650_regulator_set_current_limit,
> + .get_current_limit = regulator_get_current_limit_regmap,
> + .set_current_limit = regulator_set_current_limit_regmap,
> .set_active_discharge = regulator_set_active_discharge_regmap,
> };
>
> @@ -293,8 +249,8 @@ static const struct regulator_ops max77651_SBB1_regulator_ops = {
> .list_voltage = regulator_list_voltage_table,
> .get_voltage_sel = regulator_get_voltage_sel_regmap,
> .set_voltage_sel = max77651_regulator_sbb1_set_voltage_sel,
> - .get_current_limit = max77650_regulator_get_current_limit,
> - .set_current_limit = max77650_regulator_set_current_limit,
> + .get_current_limit = regulator_get_current_limit_regmap,
> + .set_current_limit = regulator_set_current_limit_regmap,
> .set_active_discharge = regulator_set_active_discharge_regmap,
> };
>
> @@ -343,6 +299,10 @@ static struct max77650_regulator_desc max77650_SBB0_desc = {
> .enable_time = 100,
> .type = REGULATOR_VOLTAGE,
> .owner = THIS_MODULE,
> + .csel_reg = MAX77650_REG_CNFG_SBB0_A,
> + .csel_mask = MAX77650_REGULATOR_CURR_LIM_MASK,
> + .curr_table = max77650_current_limit_table,
> + .n_current_limits = ARRAY_SIZE(max77650_current_limit_table),
> },
> .regA = MAX77650_REG_CNFG_SBB0_A,
> .regB = MAX77650_REG_CNFG_SBB0_B,
> @@ -368,6 +328,10 @@ static struct max77650_regulator_desc max77650_SBB1_desc = {
> .enable_time = 100,
> .type = REGULATOR_VOLTAGE,
> .owner = THIS_MODULE,
> + .csel_reg = MAX77650_REG_CNFG_SBB1_A,
> + .csel_mask = MAX77650_REGULATOR_CURR_LIM_MASK,
> + .curr_table = max77650_current_limit_table,
> + .n_current_limits = ARRAY_SIZE(max77650_current_limit_table),
> },
> .regA = MAX77650_REG_CNFG_SBB1_A,
> .regB = MAX77650_REG_CNFG_SBB1_B,
> @@ -392,6 +356,10 @@ static struct max77650_regulator_desc max77651_SBB1_desc = {
> .enable_time = 100,
> .type = REGULATOR_VOLTAGE,
> .owner = THIS_MODULE,
> + .csel_reg = MAX77650_REG_CNFG_SBB1_A,
> + .csel_mask = MAX77650_REGULATOR_CURR_LIM_MASK,
> + .curr_table = max77650_current_limit_table,
> + .n_current_limits = ARRAY_SIZE(max77650_current_limit_table),
> },
> .regA = MAX77650_REG_CNFG_SBB1_A,
> .regB = MAX77650_REG_CNFG_SBB1_B,
> @@ -417,6 +385,10 @@ static struct max77650_regulator_desc max77650_SBB2_desc = {
> .enable_time = 100,
> .type = REGULATOR_VOLTAGE,
> .owner = THIS_MODULE,
> + .csel_reg = MAX77650_REG_CNFG_SBB2_A,
> + .csel_mask = MAX77650_REGULATOR_CURR_LIM_MASK,
> + .curr_table = max77650_current_limit_table,
> + .n_current_limits = ARRAY_SIZE(max77650_current_limit_table),
> },
> .regA = MAX77650_REG_CNFG_SBB2_A,
> .regB = MAX77650_REG_CNFG_SBB2_B,
> @@ -442,6 +414,10 @@ static struct max77650_regulator_desc max77651_SBB2_desc = {
> .enable_time = 100,
> .type = REGULATOR_VOLTAGE,
> .owner = THIS_MODULE,
> + .csel_reg = MAX77650_REG_CNFG_SBB2_A,
> + .csel_mask = MAX77650_REGULATOR_CURR_LIM_MASK,
> + .curr_table = max77650_current_limit_table,
> + .n_current_limits = ARRAY_SIZE(max77650_current_limit_table),
> },
> .regA = MAX77650_REG_CNFG_SBB2_A,
> .regB = MAX77650_REG_CNFG_SBB2_B,
> --
> 2.17.1
>

Looks good.

Acked-by: Bartosz Golaszewski <bgolaszewski@xxxxxxxxxxxx>