RE: [PATCH 09/11] regulator: pv88080: Convert to use regulator_set/get_current_limit_regmap

[Steve Twiss]

On 28 February 2019 13:40, Axel Lin wrote:

> Subject: [PATCH 09/11] regulator: pv88080: Convert to use
> regulator_set/get_current_limit_regmap
> 
> Use regulator_set/get_current_limit_regmap helpers to save some code.

[...]

Hi Axel,

Looks good to me. Thanks again.

Acked-by: Steve Twiss <stwiss.opensource@xxxxxxxxxxx>

Regards,
Steve

[...]

> @@ -315,8 +276,8 @@ static const struct regulator_ops pv88080_buck_ops = {
>  	.set_voltage_sel = regulator_set_voltage_sel_regmap,
>  	.get_voltage_sel = regulator_get_voltage_sel_regmap,
>  	.list_voltage = regulator_list_voltage_linear,
> -	.set_current_limit = pv88080_set_current_limit,
> -	.get_current_limit = pv88080_get_current_limit,
> +	.set_current_limit = regulator_set_current_limit_regmap,
> +	.get_current_limit = regulator_get_current_limit_regmap,
>  };

[...]

> 
>  static const struct regulator_ops pv88080_hvbuck_ops = {
> @@ -341,9 +302,9 @@ static const struct regulator_ops pv88080_hvbuck_ops = {
>  		.min_uV = min, \
>  		.uV_step = step, \
>  		.n_voltages = ((max) - (min))/(step) + 1, \
> +		.curr_table = limits_array, \
> +		.n_current_limits = ARRAY_SIZE(limits_array), \
>  	},\
> -	.current_limits = limits_array, \
> -	.n_current_limits = ARRAY_SIZE(limits_array), \
>  }
> 
>  #define PV88080_HVBUCK(chip, regl_name, min, step, max) \
> @@ -521,9 +482,9 @@ static int pv88080_i2c_probe(struct i2c_client *i2c,
>  		if (init_data)
>  			config.init_data = &init_data[i];
> 
> -		pv88080_regulator_info[i].limit_reg
> +		pv88080_regulator_info[i].desc.csel_reg
>  			= regmap_config->buck_regmap[i].buck_limit_reg;
> -		pv88080_regulator_info[i].limit_mask
> +		pv88080_regulator_info[i].desc.csel_mask
>  			= regmap_config->buck_regmap[i].buck_limit_mask;
>  		pv88080_regulator_info[i].mode_reg
>  			= regmap_config->buck_regmap[i].buck_mode_reg;
> --
> 2.17.1