RE: [PATCH 10/11] regulator: pv88090: Convert to use regulator_set/get_current_limit_regmap

[Steve Twiss]

On 28 February 2019 13:40, Axel Lin wrote:

Hi Axel,

> Subject: [PATCH 10/11] regulator: pv88090: Convert to use
> regulator_set/get_current_limit_regmap
> 
> Use regulator_set/get_current_limit_regmap helpers to save some code.

[...]

> @@ -193,8 +155,8 @@ static const struct regulator_ops pv88090_buck_ops = {
>  	.set_voltage_sel = regulator_set_voltage_sel_regmap,
>  	.get_voltage_sel = regulator_get_voltage_sel_regmap,
>  	.list_voltage = regulator_list_voltage_linear,
> -	.set_current_limit = pv88090_set_current_limit,
> -	.get_current_limit = pv88090_get_current_limit,
> +	.set_current_limit = regulator_set_current_limit_regmap,
> +	.get_current_limit = regulator_get_current_limit_regmap,
>  };
> 
>  static const struct regulator_ops pv88090_ldo_ops = {
> @@ -223,10 +185,11 @@ static const struct regulator_ops pv88090_ldo_ops = {
>  		.enable_mask = PV88090_##regl_name##_EN, \
>  		.vsel_reg = PV88090_REG_##regl_name##_CONF0, \
>  		.vsel_mask = PV88090_V##regl_name##_MASK, \
> +		.curr_table = limits_array, \
> +		.n_current_limits = ARRAY_SIZE(limits_array), \
> +		.csel_reg = PV88090_REG_##regl_name##_CONF1, \
> +		.csel_mask = PV88090_##regl_name##_ILIM_MASK, \
>  	},\
> -	.current_limits = limits_array, \
> -	.n_current_limits = ARRAY_SIZE(limits_array), \
> -	.limit_mask = PV88090_##regl_name##_ILIM_MASK, \
>  	.conf = PV88090_REG_##regl_name##_CONF1, \
>  	.conf2 = PV88090_REG_##regl_name##_CONF2, \

Acked-by: Steve Twiss <stwiss.opensource@xxxxxxxxxxx>;

Thanks,
Regards,
Steve