Re: [PATCH v3 2/2] PCI: iproc: Add outbound configuration for 32-bit I/O region

[Srinath Mannam]

Hi Lorenzo,

Thanks for the review.. Please see my comments below in line..

Regards,
Srinath.
On Thu, Feb 28, 2019 at 9:43 PM Lorenzo Pieralisi
<lorenzo.pieralisi@xxxxxxx> wrote:
>
> On Wed, Feb 20, 2019 at 10:03:55PM +0530, Srinath Mannam wrote:
> > In the present driver outbound window configuration is done to map above
> > 32-bit address I/O regions with corresponding PCI memory range given in
> > ranges DT property.
> >
> > This patch add outbound window configuration to map below 32-bit I/O range
> > with corresponding PCI memory, which helps to access I/O region in IA32
>
> I think you mean ARM 32-bit here, not IA32.
Yes ARM 32 bit.. Thank you.
>
> > and one to one mapping of I/O region to PCI memory.
> >
> > Ex:
> > 1. ranges DT property given for current driver is,
> >     ranges = <0x83000000 0x0 0x40000000 0x4 0x00000000 0 0x40000000>;
> >     I/O region address is 0x400000000
> > 2. ranges DT property can be given after this patch,
> >     ranges = <0x83000000 0x0 0x42000000 0x0 0x42000000 0 0x2000000>;
> >     I/O region address is 0x42000000
> >
> > Signed-off-by: Srinath Mannam <srinath.mannam@xxxxxxxxxxxx>
> > Signed-off-by: Abhishek Shah <abhishek.shah@xxxxxxxxxxxx>
> > Signed-off-by: Ray Jui <ray.jui@xxxxxxxxxxxx>
> > Reviewed-by: Scott Branden <scott.branden@xxxxxxxxxxxx>
> > Reviewed-by: Vikram Prakash <vikram.prakash@xxxxxxxxxxxx>
>
> I asked you before, please point me at mailing list discussions where
> these review tags were given, v1 was already carrying them but that's
> not how the process works, they have to be given on mailing lists.
Sorry I missed your comment. These tags are our internal review list.
Many Thanks for sharing knowledge.
I will follow the process from next time onward. I will modify and
send next patch set.
>
> Lorenzo
>
> > ---
> >  drivers/pci/controller/pcie-iproc.c | 21 +++++++++++++++++++--
> >  1 file changed, 19 insertions(+), 2 deletions(-)
> >
> > diff --git a/drivers/pci/controller/pcie-iproc.c b/drivers/pci/controller/pcie-iproc.c
> > index b882255..080f142 100644
> > --- a/drivers/pci/controller/pcie-iproc.c
> > +++ b/drivers/pci/controller/pcie-iproc.c
> > @@ -955,8 +955,25 @@ static int iproc_pcie_setup_ob(struct iproc_pcie *pcie, u64 axi_addr,
> >                       resource_size_t window_size =
> >                               ob_map->window_sizes[size_idx] * SZ_1M;
> >
> > -                     if (size < window_size)
> > -                             continue;
> > +                     /*
> > +                      * Keep iterating until we reach the last window and
> > +                      * with the minimal window size at index zero. In this
> > +                      * case, we take a compromise by mapping it using the
> > +                      * minimum window size that can be supported
> > +                      */
> > +                     if (size < window_size) {
> > +                             if (size_idx > 0 || window_idx > 0)
> > +                                     continue;
> > +
> > +                             /*
> > +                              * For the corner case of reaching the minimal
> > +                              * window size that can be supported on the
> > +                              * last window
> > +                              */
> > +                             axi_addr = ALIGN_DOWN(axi_addr, window_size);
> > +                             pci_addr = ALIGN_DOWN(pci_addr, window_size);
> > +                             size = window_size;
> > +                     }
> >
> >                       if (!IS_ALIGNED(axi_addr, window_size) ||
> >                           !IS_ALIGNED(pci_addr, window_size)) {
> > --
> > 2.7.4
> >