[PATCH 1/3] clk: sunxi-ng: Allow DE clock to set parent rate

[Jernej Skrabec]

DE2/DE3 mixers have to run at specific frequency in order to work
optimally. This wasn't actually possible for some SoCs because "de"
clock wasn't allowed to adjust parent rate.

Add CLK_SET_RATE_PARENT flag to all "de" clocks which didn't have it
yet.

Signed-off-by: Jernej Skrabec <jernej.skrabec@xxxxxxxx>
---
 drivers/clk/sunxi-ng/ccu-sun50i-a64.c | 3 ++-
 drivers/clk/sunxi-ng/ccu-sun50i-h6.c  | 2 +-
 drivers/clk/sunxi-ng/ccu-sun8i-v3s.c  | 3 ++-
 3 files changed, 5 insertions(+), 3 deletions(-)

diff --git a/drivers/clk/sunxi-ng/ccu-sun50i-a64.c b/drivers/clk/sunxi-ng/ccu-sun50i-a64.c
index 932836d26e2b..be0deee70182 100644
--- a/drivers/clk/sunxi-ng/ccu-sun50i-a64.c
+++ b/drivers/clk/sunxi-ng/ccu-sun50i-a64.c
@@ -531,7 +531,8 @@ static SUNXI_CCU_GATE(dram_ts_clk,	"dram-ts",	"dram",
 
 static const char * const de_parents[] = { "pll-periph0-2x", "pll-de" };
 static SUNXI_CCU_M_WITH_MUX_GATE(de_clk, "de", de_parents,
-				 0x104, 0, 4, 24, 3, BIT(31), 0);
+				 0x104, 0, 4, 24, 3, BIT(31),
+				 CLK_SET_RATE_PARENT);
 
 static const char * const tcon0_parents[] = { "pll-mipi", "pll-video0-2x" };
 static const u8 tcon0_table[] = { 0, 2, };
diff --git a/drivers/clk/sunxi-ng/ccu-sun50i-h6.c b/drivers/clk/sunxi-ng/ccu-sun50i-h6.c
index 139e8389615c..daf78966555e 100644
--- a/drivers/clk/sunxi-ng/ccu-sun50i-h6.c
+++ b/drivers/clk/sunxi-ng/ccu-sun50i-h6.c
@@ -266,7 +266,7 @@ static SUNXI_CCU_M_WITH_MUX_GATE(de_clk, "de", de_parents, 0x600,
 				       0, 4,	/* M */
 				       24, 1,	/* mux */
 				       BIT(31),	/* gate */
-				       0);
+				       CLK_SET_RATE_PARENT);
 
 static SUNXI_CCU_GATE(bus_de_clk, "bus-de", "psi-ahb1-ahb2",
 		      0x60c, BIT(0), 0);
diff --git a/drivers/clk/sunxi-ng/ccu-sun8i-v3s.c b/drivers/clk/sunxi-ng/ccu-sun8i-v3s.c
index ac12f261f8ca..eada0e291859 100644
--- a/drivers/clk/sunxi-ng/ccu-sun8i-v3s.c
+++ b/drivers/clk/sunxi-ng/ccu-sun8i-v3s.c
@@ -325,7 +325,8 @@ static SUNXI_CCU_GATE(dram_ohci_clk,	"dram-ohci",	"dram",
 
 static const char * const de_parents[] = { "pll-video", "pll-periph0" };
 static SUNXI_CCU_M_WITH_MUX_GATE(de_clk, "de", de_parents,
-				 0x104, 0, 4, 24, 2, BIT(31), 0);
+				 0x104, 0, 4, 24, 2, BIT(31),
+				 CLK_SET_RATE_PARENT);
 
 static const char * const tcon_parents[] = { "pll-video" };
 static SUNXI_CCU_M_WITH_MUX_GATE(tcon_clk, "tcon", tcon_parents,
-- 
2.20.1