Re: [PATCH] cros_ec: instantiate properly Intel ISH MCU device

[Rushikesh S Kadam]

Thanks Enric, Jett, Gwendal & Andy for taking timeout to review
the patch & provide detailed inputs.

Couple of acks below.


On Thu, Feb 28, 2019 at 01:33:09PM +0100, Enric Balletbo Serra wrote:
> Hi,
> 
> Based on the discussion we had, only some few comments.
> 
> Missatge de Rushikesh S Kadam <rushikesh.s.kadam@xxxxxxxxx> del dia
> dg., 24 de febr. 2019 a les 10:15:
> >
> > Intel Integrated Sensor Hub (ISH) is also a MCU running EC
> > having feature bit EC_FEATURE_ISH. Instantiate it as a special
> > CrOS EC device with device name 'cros_ish'.
> >
> > Signed-off-by: Rushikesh S Kadam <rushikesh.s.kadam@xxxxxxxxx>
> > ---
> >  drivers/mfd/cros_ec_dev.c            | 10 ++++++++++
> >  include/linux/mfd/cros_ec.h          |  1 +
> >  include/linux/mfd/cros_ec_commands.h |  2 ++
> 
> Better if you use the "mfd: cros_ec:" prefix in the next version so
> it's clear that this should go through the MFD tree.

Ok, will do.

> 
> >  3 files changed, 13 insertions(+)
> >
> > diff --git a/drivers/mfd/cros_ec_dev.c b/drivers/mfd/cros_ec_dev.c
> > index 2d0fee4..be499b8 100644
> > --- a/drivers/mfd/cros_ec_dev.c
> > +++ b/drivers/mfd/cros_ec_dev.c
> > @@ -414,6 +414,16 @@ static int ec_device_probe(struct platform_device *pdev)
> >         device_initialize(&ec->class_dev);
> >         cdev_init(&ec->cdev, &fops);
> >
> > +       /* check whether this is actually a Intel ISH rather than an EC */
> 
> "Check whether this is actually an Integrated Sensor Hub (ISH) rather
> than an EC"?

Ack.

> 
> > +       if (cros_ec_check_features(ec, EC_FEATURE_ISH)) {
> > +               dev_info(dev, "Intel ISH MCU detected.\n");
> 
>  dev_info(dev, "CrOS ISH MCU detected.\n"); ?

Ack.

> 
> > +               /*
> > +                * Help userspace differentiating ECs from ISH MCU,
> > +                * regardless of the probing order.
> > +                */
> > +               ec_platform->ec_name = CROS_EC_DEV_ISH_NAME;
> > +       }
> > +
> >         /*
> >          * Add the class device
> >          * Link to the character device for creating the /dev entry
> > diff --git a/include/linux/mfd/cros_ec.h b/include/linux/mfd/cros_ec.h
> > index de8b588..00c5765 100644
> > --- a/include/linux/mfd/cros_ec.h
> > +++ b/include/linux/mfd/cros_ec.h
> > @@ -24,6 +24,7 @@
> >
> >  #define CROS_EC_DEV_NAME "cros_ec"
> >  #define CROS_EC_DEV_PD_NAME "cros_pd"
> > +#define CROS_EC_DEV_ISH_NAME "cros_ish"
> >
> >  /*
> >   * The EC is unresponsive for a time after a reboot command.  Add a
> > diff --git a/include/linux/mfd/cros_ec_commands.h b/include/linux/mfd/cros_ec_commands.h
> > index fc91082..9276c3c 100644
> > --- a/include/linux/mfd/cros_ec_commands.h
> > +++ b/include/linux/mfd/cros_ec_commands.h
> > @@ -856,6 +856,8 @@ enum ec_feature_code {
> >         EC_FEATURE_RTC = 27,
> >         /* EC supports CEC commands */
> >         EC_FEATURE_CEC = 35,
> > +       /* The MCU is an Intel Integrated Sensor Hub */
> > +       EC_FEATURE_ISH = 40,
> 
> Just a note that we will have a trivial conflict to solve with
> https://lkml.org/lkml/2019/2/27/723

Thanks

Rushikesh

> 
> >  };
> >
> >  #define EC_FEATURE_MASK_0(event_code) (1UL << (event_code % 32))
> > --
> > 1.9.1
> >
> 
> Best regards,
> Enric

--