Re: [PATCH v6 0/3] Stingray thermal driver support

[Florian Fainelli]

On 2/14/19 8:20 PM, Srinath Mannam wrote:
> Hi Eduardo,
> 
> Could you please provide your review comments?

So it sounds like this driver was included in a pull request to Linus
for 5.1 [1], although I did not see a response to that patch series,
which would have helped synchronize the Device Tree changes and send
them to Linus as well... I will see if the ARM SoC folks will accept a
late request, most likely they would not.

Eduardo, can you include replies to patches when you applies those to
your tree that way we know whether/when to take the corresponding DTS
changes? Thank you.

[1]:
https://git.kernel.org/torvalds/c/9f24a81e2e5daf8820c8654afcd8512e797c41f2

> 
> Regards,
> Srinath.
> 
> On Wed, Feb 6, 2019 at 5:28 AM Eduardo Valentin <edubezval@xxxxxxxxx> wrote:
>>
>> Hello,
>>
>> On Mon, Feb 04, 2019 at 04:16:19PM -0800, Ray Jui wrote:
>>> Hi Zhang/Eduardo,
>>>
>>> Can this patch series be merged? It looks like Srinath has addressed all
>>> review comments?
>>
>> I will take a look. Side note, thermal patches are reviewed on
>> linux-pm@xxxxxxxxxxxxxxxx Copying that list it does help because that
>> is how the patches get assigned in patchwork.kernel.org.
>>
>>>
>>> The following tag should be added to the binding document patch:
>>>
>>> Reviewed-by: Rob Herring <robh@xxxxxxxxxx>
>>>
>>> Thanks,
>>>
>>> Ray
>>>
>>> On 1/3/2019 12:55 AM, Srinath Mannam wrote:
>>>> These patches adds the stingray thermal driver and its
>>>> corresponding DT nodes with documentation.
>>>>
>>>> Changes from v5
>>>>   - Addressed Eduardo Valentin comments.
>>>>
>>>> Changes from v4
>>>>   - Addressed Rob Herring comments on DT parameters and
>>>>     thermal driver architecture.
>>>>   - Removed brcm,max-crit-temp DT parameter
>>>>   - Changed driver to thermal sensor registration model.
>>>>   - Added trip DT properties.
>>>>
>>>> Changes from v3
>>>>   - Addressed Daniel lezcano comments.
>>>>   - Elaborated commit description of thermal driver patch.
>>>>   - Added brcm,max-crit-temp DT parameter.
>>>>
>>>> Changes from v2:
>>>>   - All stingray TMON DT nodes are combine together into single.
>>>>     Temperature registers are combined into one mem resource.
>>>>     brcm,tmon-mask parameter has available TMONs mask value.
>>>>   - All available TMONs are initialized together in single
>>>>     instance of driver probe call.
>>>>
>>>> Changes from v1:
>>>>   - Fixed auto build sparce warning.
>>>>
>>>> Pramod Kumar (3):
>>>>   dt-bindings: thermal: Add binding document for SR thermal
>>>>   thermal: broadcom: Add Stingray thermal driver
>>>>   arm64: dts: stingray: Add Stingray Thermal DT support.
>>>>
>>>>  .../bindings/thermal/brcm,sr-thermal.txt           | 105 ++++++++++++++++++
>>>>  .../arm64/boot/dts/broadcom/stingray/stingray.dtsi |  89 +++++++++++++++
>>>>  drivers/thermal/Kconfig                            |   3 +-
>>>>  drivers/thermal/broadcom/Kconfig                   |   9 ++
>>>>  drivers/thermal/broadcom/Makefile                  |   1 +
>>>>  drivers/thermal/broadcom/sr-thermal.c              | 122 +++++++++++++++++++++
>>>>  6 files changed, 328 insertions(+), 1 deletion(-)
>>>>  create mode 100644 Documentation/devicetree/bindings/thermal/brcm,sr-thermal.txt
>>>>  create mode 100644 drivers/thermal/broadcom/sr-thermal.c
>>>>


-- 
Florian