Re: [PATCH v3 2/3] staging: iio: frequency: ad9834: Move phase and scale to standard iio attribute

From: Jonathan Cameron
Date: Sat Mar 09 2019 - 12:36:34 EST

Next message: Jonathan Cameron: "Re: [PATCH v4 4/9] staging:iio:ad7780: add chip ID values and mask"
Previous message: Jonathan Cameron: "Re: [PATCH v2 1/3] iio: light: Add driver for ap3216c"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]

On Sun, 3 Mar 2019 15:33:47 +0000
Beniamin Bia <biabeniamin@xxxxxxxxxxx> wrote:

> Thank you for reviewing my patch.
>
> I'm gonna document the current state of driver in an ABI and than
> propose in another patch modifications from current form. What do you
> think about this approach?

The problem here is that it is hard enough to get review for
documentation patches in the first place, and to be honest I'm
not sure we care what the current interface is.

So this may be a useful exercise but we probably won't get any
real review until you reach the end of it and have a final
proposed interface. Certainly, if they are in one series,
put the doc patch at the end and just document the result.

Jonathan

>
> Thanks,
> Ben
> ________________________________
> From: Jonathan Cameron <jic23@xxxxxxxxxx>
> Sent: Sunday, March 3, 2019 15:28
> To: Beniamin Bia
> Cc: lars@xxxxxxxxxx; Michael.Hennerich@xxxxxxxxxx; knaack.h@xxxxxx; pmeerw@xxxxxxxxxx; gregkh@xxxxxxxxxxxxxxxxxxx; linux-iio@xxxxxxxxxxxxxxx; devel@xxxxxxxxxxxxxxxxxxxx; linux-kernel@xxxxxxxxxxxxxxx; biabeniamin@xxxxxxxxxxx
> Subject: Re: [PATCH v3 2/3] staging: iio: frequency: ad9834: Move phase and scale to standard iio attribute
>
> On Mon, 25 Feb 2019 21:17:31 +0200
> Beniamin Bia <beniamin.bia@xxxxxxxxxx> wrote:
>
> > The custom phase and scale attributes were moved to standard iio types.
> >
> > Signed-off-by: Beniamin Bia <beniamin.bia@xxxxxxxxxx>
> > ---
> > Changes in v3:
> > -abi documentation added
> >
> > .../testing/sysfs-bus-iio-frequency-ad9834 | 10 ++--
> > drivers/staging/iio/frequency/ad9834.c | 53 +++++++++++--------
> > 2 files changed, 38 insertions(+), 25 deletions(-)
> >
> > diff --git a/Documentation/ABI/testing/sysfs-bus-iio-frequency-ad9834 b/Documentation/ABI/testing/sysfs-bus-iio-frequency-ad9834
> > index b912b49473a3..656aa5b6d22b 100644
> > --- a/Documentation/ABI/testing/sysfs-bus-iio-frequency-ad9834
> > +++ b/Documentation/ABI/testing/sysfs-bus-iio-frequency-ad9834
> > @@ -1,3 +1,5 @@
> > +What: /sys/bus/iio/devices/iio:deviceX/out_altvoltage_scale
> > +
> > What: /sys/bus/iio/devices/iio:deviceX/out_altvoltage0_frequency
> > KernelVersion: 3.5.0
> > Date: April 2012
> > @@ -16,7 +18,7 @@ Description:
> > value is between 0 and clock frequency / 2.
> > Reading returns the value of frequency written in register 1.
> >
> > -What: /sys/bus/iio/devices/iio:deviceX/out_altvoltage0_phase0
> > +What: /sys/bus/iio/devices/iio:deviceX/out_altvoltage0_phase
>
> Ah, I see what you are doing here. Much better to just have the final ABI
> documented to discuss than doing it in steps.
>
> > KernelVersion: 3.5.0
> > Date: April 2012
> > Contact: linux-iio@xxxxxxxxxxxxxxx
> > @@ -25,7 +27,7 @@ Description:
> > is between 0 and 4096 rad.
> > Reading returns the value of phase written in register 0.
> >
> > -What: /sys/bus/iio/devices/iio:deviceX/out_altvoltage0_phase1
> > +What: /sys/bus/iio/devices/iio:deviceX/out_altvoltage1_phase
> > KernelVersion: 3.5.0
> > Date: April 2012
> > Date: February 2019
> > @@ -106,9 +108,9 @@ Description:
> > have two registers for frequency and phase but only one
> > output. The user can select which one controls the output.
> > 0 represents phase 0 which is mapped to
> > - out_altvoltage0_phase0
> > + out_altvoltage0_phase
> > 1 represents phase 1 which is mapped to
> > - out_altvoltage0_phase1
> > + out_altvoltage1_phase
> >
> > What: /sys/bus/iio/devices/iio:deviceX/out_altvoltage0_out0_enable
> > KernelVersion: 3.5.0
> > diff --git a/drivers/staging/iio/frequency/ad9834.c b/drivers/staging/iio/frequency/ad9834.c
> > index 8465dac656dd..107d859dadd7 100644
> > --- a/drivers/staging/iio/frequency/ad9834.c
> > +++ b/drivers/staging/iio/frequency/ad9834.c
> > @@ -82,6 +82,7 @@ struct ad9834_state {
> > struct mutex lock; /* protect sensor state */
> >
> > unsigned long frequency[2];
> > + unsigned long phase[2];
> >
> > /*
> > * DMA (thus cache coherency maintenance) requires the
> > @@ -113,6 +114,8 @@ enum ad9834_supported_device_ids {
> > .output = 1, \
> > .channel = (chan), \
> > .info_mask_separate = BIT(IIO_CHAN_INFO_FREQUENCY) \
> > + | BIT(IIO_CHAN_INFO_PHASE),\
> > + .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE), \
> > }
> >
> > static const struct iio_chan_spec ad9833_channels[] = {
> > @@ -170,13 +173,26 @@ static int ad9834_write_frequency(struct ad9834_state *st,
> > }
> >
> > static int ad9834_write_phase(struct ad9834_state *st,
> > - unsigned long addr, unsigned long phase)
> > + enum ad9834_ch_addr addr,
> > + unsigned long phase)
> > {
> > + int ret;
> > +
> > if (phase > BIT(AD9834_PHASE_BITS))
> > return -EINVAL;
> > - st->data = cpu_to_be16(addr | phase);
> >
> > - return spi_sync(st->spi, &st->msg);
> > + if (addr == AD9834_CHANNEL_ADDRESS0)
> > + st->data = cpu_to_be16(AD9834_REG_PHASE0 | phase);
> > + else
> > + st->data = cpu_to_be16(AD9834_REG_PHASE1 | phase);
> > +
> > + ret = spi_sync(st->spi, &st->msg);
> > + if (ret)
> > + return ret;
> > +
> > + st->phase[(int)addr] = phase;
> > +
> > + return 0;
> > }
> >
> > static int ad9834_read_raw(struct iio_dev *indio_dev,
> > @@ -189,6 +205,13 @@ static int ad9834_read_raw(struct iio_dev *indio_dev,
> > case IIO_CHAN_INFO_FREQUENCY:
> > *val = st->frequency[chan->channel];
> > return IIO_VAL_INT;
> > + case IIO_CHAN_INFO_PHASE:
> > + *val = st->phase[chan->channel];
> > + return IIO_VAL_INT;
> > + case IIO_CHAN_INFO_SCALE:
> > + /*1 hz */
> > + *val = 1;
> > + return IIO_VAL_INT;
> > }
> >
> > return -EINVAL;
> > @@ -205,6 +228,10 @@ static int ad9834_write_raw(struct iio_dev *indio_dev,
> > return ad9834_write_frequency(st,
> > (enum ad9834_ch_addr)chan->channel,
> > val);
> > + case IIO_CHAN_INFO_PHASE:
> > + return ad9834_write_phase(st,
> > + (enum ad9834_ch_addr)chan->channel,
> > + val);
> > default:
> > return -EINVAL;
> > }
> > @@ -229,10 +256,6 @@ static ssize_t ad9834_write(struct device *dev,
> >
> > mutex_lock(&st->lock);
> > switch ((u32)this_attr->address) {
> > - case AD9834_REG_PHASE0:
> > - case AD9834_REG_PHASE1:
> > - ret = ad9834_write_phase(st, this_attr->address, val);
> > - break;
> > case AD9834_OPBITEN:
> > if (st->control & AD9834_MODE) {
> > ret = -EINVAL; /* AD9843 reserved mode */
> > @@ -392,12 +415,8 @@ static IIO_DEVICE_ATTR(out_altvoltage0_out1_wavetype_available, 0444,
> > */
> >
> > static IIO_DEV_ATTR_FREQSYMBOL(0, 0200, NULL, ad9834_write, AD9834_FSEL);
> > -static IIO_CONST_ATTR_FREQ_SCALE(0, "1"); /* 1Hz */
> >
> > -static IIO_DEV_ATTR_PHASE(0, 0, 0200, NULL, ad9834_write, AD9834_REG_PHASE0);
> > -static IIO_DEV_ATTR_PHASE(0, 1, 0200, NULL, ad9834_write, AD9834_REG_PHASE1);
> > static IIO_DEV_ATTR_PHASESYMBOL(0, 0200, NULL, ad9834_write, AD9834_PSEL);
> > -static IIO_CONST_ATTR_PHASE_SCALE(0, "0.0015339808"); /* 2PI/2^12 rad*/
> >
> > static IIO_DEV_ATTR_PINCONTROL_EN(0, 0200, NULL,
> > ad9834_write, AD9834_PIN_SW);
> > @@ -408,10 +427,6 @@ static IIO_DEV_ATTR_OUT_WAVETYPE(0, 0, ad9834_store_wavetype, 0);
> > static IIO_DEV_ATTR_OUT_WAVETYPE(0, 1, ad9834_store_wavetype, 1);
> >
> > static struct attribute *ad9834_attributes[] = {
> > - &iio_const_attr_out_altvoltage0_frequency_scale.dev_attr.attr,
> > - &iio_dev_attr_out_altvoltage0_phase0.dev_attr.attr,
> > - &iio_dev_attr_out_altvoltage0_phase1.dev_attr.attr,
> > - &iio_const_attr_out_altvoltage0_phase_scale.dev_attr.attr,
> > &iio_dev_attr_out_altvoltage0_pincontrol_en.dev_attr.attr,
> > &iio_dev_attr_out_altvoltage0_frequencysymbol.dev_attr.attr,
> > &iio_dev_attr_out_altvoltage0_phasesymbol.dev_attr.attr,
> > @@ -425,10 +440,6 @@ static struct attribute *ad9834_attributes[] = {
> > };
> >
> > static struct attribute *ad9833_attributes[] = {
> > - &iio_const_attr_out_altvoltage0_frequency_scale.dev_attr.attr,
> > - &iio_dev_attr_out_altvoltage0_phase0.dev_attr.attr,
> > - &iio_dev_attr_out_altvoltage0_phase1.dev_attr.attr,
> > - &iio_const_attr_out_altvoltage0_phase_scale.dev_attr.attr,
> > &iio_dev_attr_out_altvoltage0_frequencysymbol.dev_attr.attr,
> > &iio_dev_attr_out_altvoltage0_phasesymbol.dev_attr.attr,
> > &iio_dev_attr_out_altvoltage0_out_enable.dev_attr.attr,
> > @@ -552,11 +563,11 @@ static int ad9834_probe(struct spi_device *spi)
> > if (ret)
> > goto error_clock_unprepare;
> >
> > - ret = ad9834_write_phase(st, AD9834_REG_PHASE0, 512);
> > + ret = ad9834_write_phase(st, AD9834_CHANNEL_ADDRESS0, 512);
> > if (ret)
> > goto error_clock_unprepare;
> >
> > - ret = ad9834_write_phase(st, AD9834_REG_PHASE1, 1024);
> > + ret = ad9834_write_phase(st, AD9834_CHANNEL_ADDRESS1, 1024);
> > if (ret)
> > goto error_clock_unprepare;
> >
>

Next message: Jonathan Cameron: "Re: [PATCH v4 4/9] staging:iio:ad7780: add chip ID values and mask"
Previous message: Jonathan Cameron: "Re: [PATCH v2 1/3] iio: light: Add driver for ap3216c"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]