Re: [PATCH] mmc_spi: add a status check for spi_sync_locked

[Laurent Pinchart]

Hi Kangjie,

Thank you for the patch.

On Sun, Mar 10, 2019 at 01:53:05AM -0600, Kangjie Lu wrote:
> In case spi_sync_locked fails, the fix reports the error and
> returns the error code upstream.
> 
> Signed-off-by: Kangjie Lu <kjlu@xxxxxxx>
> ---
>  drivers/mmc/host/mmc_spi.c | 4 ++++
>  1 file changed, 4 insertions(+)
> 
> diff --git a/drivers/mmc/host/mmc_spi.c b/drivers/mmc/host/mmc_spi.c
> index 1b1498805972..32fea585262b 100644
> --- a/drivers/mmc/host/mmc_spi.c
> +++ b/drivers/mmc/host/mmc_spi.c
> @@ -819,6 +819,10 @@ mmc_spi_readblock(struct mmc_spi_host *host, struct spi_transfer *t,
>  	}
>  
>  	status = spi_sync_locked(spi, &host->m);
> +	if (status < 0) {
> +		dev_dbg(&spi->dev, "read error %02x (%d)\n", status, status);

I don't think you need to print the status in both hex and in decimal
forms. %d should be enough, error codes are usually printed in decimal
in the kernel. Apart from that,

Reviewed-by: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>

> +		return status;
> +	}
>  
>  	if (host->dma_dev) {
>  		dma_sync_single_for_cpu(host->dma_dev,

-- 
Regards,

Laurent Pinchart