[PATCH 002/114] drivers: iio: Kconfig: pedantic formatting

From: Enrico Weigelt, metux IT consult
Date: Mon Mar 11 2019 - 09:21:31 EST

Formatting of Kconfig files doesn't look so pretty, so let the
Great White Handkerchief come around and clean it up.

Signed-off-by: Enrico Weigelt, metux IT consult <info@xxxxxxxxx>
---
drivers/iio/Kconfig | 24 +--
drivers/iio/accel/Kconfig | 48 +++---
drivers/iio/adc/Kconfig | 20 +--
drivers/iio/chemical/Kconfig | 12 +-
drivers/iio/common/ms_sensors/Kconfig | 2 +-
drivers/iio/humidity/Kconfig | 20 +--
drivers/iio/light/Kconfig | 274 +++++++++++++++++-----------------
drivers/iio/potentiometer/Kconfig | 34 ++---
drivers/iio/temperature/Kconfig | 16 +-
9 files changed, 225 insertions(+), 225 deletions(-)

diff --git a/drivers/iio/Kconfig b/drivers/iio/Kconfig
index d08aeb4..014006d 100644
--- a/drivers/iio/Kconfig
+++ b/drivers/iio/Kconfig
@@ -39,28 +39,28 @@ config IIO_TRIGGER
data now' interrupt.

config IIO_CONSUMERS_PER_TRIGGER
- int "Maximum number of consumers per trigger"
- depends on IIO_TRIGGER
- default "2"
- help
- This value controls the maximum number of consumers that a
- given trigger may handle. Default is 2.
+ int "Maximum number of consumers per trigger"
+ depends on IIO_TRIGGER
+ default "2"
+ help
+ This value controls the maximum number of consumers that a
+ given trigger may handle. Default is 2.

config IIO_SW_DEVICE
tristate "Enable software IIO device support"
select IIO_CONFIGFS
help
- Provides IIO core support for software devices. A software
- device can be created via configfs or directly by a driver
- using the API provided.
+ Provides IIO core support for software devices. A software
+ device can be created via configfs or directly by a driver
+ using the API provided.

config IIO_SW_TRIGGER
tristate "Enable software triggers support"
select IIO_CONFIGFS
help
- Provides IIO core support for software triggers. A software
- trigger can be created via configfs or directly by a driver
- using the API provided.
+ Provides IIO core support for software triggers. A software
+ trigger can be created via configfs or directly by a driver
+ using the API provided.

config IIO_TRIGGERED_EVENT
tristate
diff --git a/drivers/iio/accel/Kconfig b/drivers/iio/accel/Kconfig
index 898839c..4a1f133 100644
--- a/drivers/iio/accel/Kconfig
+++ b/drivers/iio/accel/Kconfig
@@ -6,28 +6,28 @@
menu "Accelerometers"

config ADIS16201
- tristate "Analog Devices ADIS16201 Dual-Axis Digital Inclinometer and Accelerometer"
- depends on SPI
- select IIO_ADIS_LIB
- select IIO_ADIS_LIB_BUFFER if IIO_BUFFER
- help
- Say Y here to build support for Analog Devices adis16201 dual-axis
- digital inclinometer and accelerometer.
+ tristate "Analog Devices ADIS16201 Dual-Axis Digital Inclinometer and Accelerometer"
+ depends on SPI
+ select IIO_ADIS_LIB
+ select IIO_ADIS_LIB_BUFFER if IIO_BUFFER
+ help
+ Say Y here to build support for Analog Devices adis16201 dual-axis
+ digital inclinometer and accelerometer.

- To compile this driver as a module, say M here: the module will
- be called adis16201.
+ To compile this driver as a module, say M here: the module will
+ be called adis16201.

config ADIS16209
- tristate "Analog Devices ADIS16209 Dual-Axis Digital Inclinometer and Accelerometer"
- depends on SPI
- select IIO_ADIS_LIB
- select IIO_ADIS_LIB_BUFFER if IIO_BUFFER
- help
- Say Y here to build support for Analog Devices adis16209 dual-axis digital inclinometer
- and accelerometer.
+ tristate "Analog Devices ADIS16209 Dual-Axis Digital Inclinometer and Accelerometer"
+ depends on SPI
+ select IIO_ADIS_LIB
+ select IIO_ADIS_LIB_BUFFER if IIO_BUFFER
+ help
+ Say Y here to build support for Analog Devices adis16209 dual-axis digital inclinometer
+ and accelerometer.

- To compile this driver as a module, say M here: the module will be
- called adis16209.
+ To compile this driver as a module, say M here: the module will be
+ called adis16209.

config ADXL345
tristate
@@ -100,16 +100,16 @@ config BMA180
module will be called bma180.

config BMA220
- tristate "Bosch BMA220 3-Axis Accelerometer Driver"
+ tristate "Bosch BMA220 3-Axis Accelerometer Driver"
depends on SPI
select IIO_BUFFER
select IIO_TRIGGERED_BUFFER
- help
- Say yes here to add support for the Bosch BMA220 triaxial
- acceleration sensor.
+ help
+ Say yes here to add support for the Bosch BMA220 triaxial
+ acceleration sensor.

- To compile this driver as a module, choose M here: the
- module will be called bma220_spi.
+ To compile this driver as a module, choose M here: the
+ module will be called bma220_spi.

config BMC150_ACCEL
tristate "Bosch BMC150 Accelerometer Driver"
diff --git a/drivers/iio/adc/Kconfig b/drivers/iio/adc/Kconfig
index 76db6e5..065065c 100644
--- a/drivers/iio/adc/Kconfig
+++ b/drivers/iio/adc/Kconfig
@@ -390,7 +390,7 @@ config HX711

This driver uses two GPIOs, one acts as the clock and controls the
channel selection and gain, the other one is used for the measurement
- data
+ data

Currently the raw value is read from the chip and delivered.
To get an actual weight one needs to subtract the
@@ -585,17 +585,17 @@ config MCP3911
called mcp3911.

config MEDIATEK_MT6577_AUXADC
- tristate "MediaTek AUXADC driver"
- depends on ARCH_MEDIATEK || COMPILE_TEST
- depends on HAS_IOMEM
- help
- Say yes here to enable support for MediaTek mt65xx AUXADC.
+ tristate "MediaTek AUXADC driver"
+ depends on ARCH_MEDIATEK || COMPILE_TEST
+ depends on HAS_IOMEM
+ help
+ Say yes here to enable support for MediaTek mt65xx AUXADC.

- The driver supports immediate mode operation to read from one of sixteen
- channels (external or internal).
+ The driver supports immediate mode operation to read from one of sixteen
+ channels (external or internal).

- This driver can also be built as a module. If so, the module will be
- called mt6577_auxadc.
+ This driver can also be built as a module. If so, the module will be
+ called mt6577_auxadc.

config MEN_Z188_ADC
tristate "MEN 16z188 ADC IP Core support"
diff --git a/drivers/iio/chemical/Kconfig b/drivers/iio/chemical/Kconfig
index d5d146e..d5fb436 100644
--- a/drivers/iio/chemical/Kconfig
+++ b/drivers/iio/chemical/Kconfig
@@ -12,14 +12,14 @@ config ATLAS_PH_SENSOR
select IIO_TRIGGERED_BUFFER
select IRQ_WORK
help
- Say Y here to build I2C interface support for the following
- Atlas Scientific OEM SM sensors:
+ Say Y here to build I2C interface support for the following
+ Atlas Scientific OEM SM sensors:
* pH SM sensor
* EC SM sensor
* ORP SM sensor

- To compile this driver as module, choose M here: the
- module will be called atlas-ph-sensor.
+ To compile this driver as module, choose M here: the
+ module will be called atlas-ph-sensor.

config BME680
tristate "Bosch Sensortec BME680 sensor driver"
@@ -47,8 +47,8 @@ config BME680_SPI
config CCS811
tristate "AMS CCS811 VOC sensor"
depends on I2C
- select IIO_BUFFER
- select IIO_TRIGGERED_BUFFER
+ select IIO_BUFFER
+ select IIO_TRIGGERED_BUFFER
help
Say Y here to build I2C interface support for the AMS
CCS811 VOC (Volatile Organic Compounds) sensor
diff --git a/drivers/iio/common/ms_sensors/Kconfig b/drivers/iio/common/ms_sensors/Kconfig
index b28a92b..89398d0 100644
--- a/drivers/iio/common/ms_sensors/Kconfig
+++ b/drivers/iio/common/ms_sensors/Kconfig
@@ -3,4 +3,4 @@
#

config IIO_MS_SENSORS_I2C
- tristate
+ tristate
diff --git a/drivers/iio/humidity/Kconfig b/drivers/iio/humidity/Kconfig
index 1a0d458..f1a8ec9 100644
--- a/drivers/iio/humidity/Kconfig
+++ b/drivers/iio/humidity/Kconfig
@@ -4,16 +4,16 @@
menu "Humidity sensors"

config AM2315
- tristate "Aosong AM2315 relative humidity and temperature sensor"
- depends on I2C
- select IIO_BUFFER
- select IIO_TRIGGERED_BUFFER
- help
- If you say yes here you get support for the Aosong AM2315
- relative humidity and ambient temperature sensor.
+ tristate "Aosong AM2315 relative humidity and temperature sensor"
+ depends on I2C
+ select IIO_BUFFER
+ select IIO_TRIGGERED_BUFFER
+ help
+ If you say yes here you get support for the Aosong AM2315
+ relative humidity and ambient temperature sensor.

- This driver can also be built as a module. If so, the module will
- be called am2315.
+ This driver can also be built as a module. If so, the module will
+ be called am2315.

config DHT11
tristate "DHT11 (and compatible sensors) driver"
@@ -78,7 +78,7 @@ config HTS221_SPI
config HTU21
tristate "Measurement Specialties HTU21 humidity & temperature sensor"
depends on I2C
- select IIO_MS_SENSORS_I2C
+ select IIO_MS_SENSORS_I2C
help
If you say yes here you get support for the Measurement Specialties
HTU21 humidity and temperature sensor.
diff --git a/drivers/iio/light/Kconfig b/drivers/iio/light/Kconfig
index 5190eac..954c958 100644
--- a/drivers/iio/light/Kconfig
+++ b/drivers/iio/light/Kconfig
@@ -13,11 +13,11 @@ config ACPI_ALS
select IIO_TRIGGERED_BUFFER
select IIO_KFIFO_BUF
help
- Say Y here if you want to build a driver for the ACPI0008
- Ambient Light Sensor.
+ Say Y here if you want to build a driver for the ACPI0008
+ Ambient Light Sensor.

- To compile this driver as a module, choose M here: the module will
- be called acpi-als.
+ To compile this driver as a module, choose M here: the module will
+ be called acpi-als.

config ADJD_S311
tristate "ADJD-S311-CR999 digital color sensor"
@@ -25,31 +25,31 @@ config ADJD_S311
select IIO_TRIGGERED_BUFFER
depends on I2C
help
- If you say yes here you get support for the Avago ADJD-S311-CR999
- digital color light sensor.
+ If you say yes here you get support for the Avago ADJD-S311-CR999
+ digital color light sensor.

- This driver can also be built as a module. If so, the module
- will be called adjd_s311.
+ This driver can also be built as a module. If so, the module
+ will be called adjd_s311.

config AL3320A
tristate "AL3320A ambient light sensor"
depends on I2C
help
- Say Y here if you want to build a driver for the Dyna Image AL3320A
- ambient light sensor.
+ Say Y here if you want to build a driver for the Dyna Image AL3320A
+ ambient light sensor.

- To compile this driver as a module, choose M here: the
- module will be called al3320a.
+ To compile this driver as a module, choose M here: the
+ module will be called al3320a.

config APDS9300
tristate "APDS9300 ambient light sensor"
depends on I2C
help
- Say Y here if you want to build a driver for the Avago APDS9300
- ambient light sensor.
+ Say Y here if you want to build a driver for the Avago APDS9300
+ ambient light sensor.

- To compile this driver as a module, choose M here: the
- module will be called apds9300.
+ To compile this driver as a module, choose M here: the
+ module will be called apds9300.

config APDS9960
tristate "Avago APDS9960 gesture/RGB/ALS/proximity sensor"
@@ -68,74 +68,74 @@ config BH1750
tristate "ROHM BH1750 ambient light sensor"
depends on I2C
help
- Say Y here to build support for the ROHM BH1710, BH1715, BH1721,
- BH1750, BH1751 ambient light sensors.
+ Say Y here to build support for the ROHM BH1710, BH1715, BH1721,
+ BH1750, BH1751 ambient light sensors.

- To compile this driver as a module, choose M here: the module will
- be called bh1750.
+ To compile this driver as a module, choose M here: the module will
+ be called bh1750.

config BH1780
tristate "ROHM BH1780 ambient light sensor"
depends on I2C
help
- Say Y here to build support for the ROHM BH1780GLI ambient
- light sensor.
+ Say Y here to build support for the ROHM BH1780GLI ambient
+ light sensor.

- To compile this driver as a module, choose M here: the module will
- be called bh1780.
+ To compile this driver as a module, choose M here: the module will
+ be called bh1780.

config CM32181
depends on I2C
tristate "CM32181 driver"
help
- Say Y here if you use cm32181.
- This option enables ambient light sensor using
- Capella cm32181 device driver.
+ Say Y here if you use cm32181.
+ This option enables ambient light sensor using
+ Capella cm32181 device driver.

- To compile this driver as a module, choose M here:
- the module will be called cm32181.
+ To compile this driver as a module, choose M here:
+ the module will be called cm32181.

config CM3232
depends on I2C
tristate "CM3232 ambient light sensor"
help
- Say Y here if you use cm3232.
- This option enables ambient light sensor using
- Capella Microsystems cm3232 device driver.
+ Say Y here if you use cm3232.
+ This option enables ambient light sensor using
+ Capella Microsystems cm3232 device driver.

- To compile this driver as a module, choose M here:
- the module will be called cm3232.
+ To compile this driver as a module, choose M here:
+ the module will be called cm3232.

config CM3323
depends on I2C
tristate "Capella CM3323 color light sensor"
help
- Say Y here if you want to build a driver for Capella CM3323
- color sensor.
+ Say Y here if you want to build a driver for Capella CM3323
+ color sensor.

- To compile this driver as a module, choose M here: the module will
- be called cm3323.
+ To compile this driver as a module, choose M here: the module will
+ be called cm3323.

config CM3605
tristate "Capella CM3605 ambient light and proximity sensor"
depends on OF
help
- Say Y here if you want to build a driver for Capella CM3605
- ambient light and short range proximity sensor.
+ Say Y here if you want to build a driver for Capella CM3605
+ ambient light and short range proximity sensor.

- To compile this driver as a module, choose M here: the module will
- be called cm3605.
+ To compile this driver as a module, choose M here: the module will
+ be called cm3605.

config CM36651
depends on I2C
tristate "CM36651 driver"
help
- Say Y here if you use cm36651.
- This option enables proximity & RGB sensor using
- Capella cm36651 device driver.
+ Say Y here if you use cm36651.
+ This option enables proximity & RGB sensor using
+ Capella cm36651 device driver.

- To compile this driver as a module, choose M here:
- the module will be called cm36651.
+ To compile this driver as a module, choose M here:
+ the module will be called cm36651.

config IIO_CROS_EC_LIGHT_PROX
tristate "ChromeOS EC Light and Proximity Sensors"
@@ -167,21 +167,21 @@ config SENSORS_ISL29018
select REGMAP_I2C
default n
help
- If you say yes here you get support for ambient light sensing and
- proximity infrared sensing from Intersil ISL29018.
- This driver will provide the measurements of ambient light intensity
- in lux, proximity infrared sensing and normal infrared sensing.
- Data from sensor is accessible via sysfs.
+ If you say yes here you get support for ambient light sensing and
+ proximity infrared sensing from Intersil ISL29018.
+ This driver will provide the measurements of ambient light intensity
+ in lux, proximity infrared sensing and normal infrared sensing.
+ Data from sensor is accessible via sysfs.

config SENSORS_ISL29028
tristate "Intersil ISL29028 Concurrent Light and Proximity Sensor"
depends on I2C
select REGMAP_I2C
help
- Provides driver for the Intersil's ISL29028 device.
- This driver supports the sysfs interface to get the ALS, IR intensity,
- Proximity value via iio. The ISL29028 provides the concurrent sensing
- of ambient light and proximity.
+ Provides driver for the Intersil's ISL29028 device.
+ This driver supports the sysfs interface to get the ALS, IR intensity,
+ Proximity value via iio. The ISL29028 provides the concurrent sensing
+ of ambient light and proximity.

config ISL29125
tristate "Intersil ISL29125 digital color light sensor"
@@ -228,22 +228,22 @@ config JSA1212
depends on I2C
select REGMAP_I2C
help
- Say Y here if you want to build a IIO driver for JSA1212
- proximity & ALS sensor device.
+ Say Y here if you want to build a IIO driver for JSA1212
+ proximity & ALS sensor device.

- To compile this driver as a module, choose M here:
- the module will be called jsa1212.
+ To compile this driver as a module, choose M here:
+ the module will be called jsa1212.

config RPR0521
tristate "ROHM RPR0521 ALS and proximity sensor driver"
depends on I2C
select REGMAP_I2C
help
- Say Y here if you want to build support for ROHM's RPR0521
- ambient light and proximity sensor device.
+ Say Y here if you want to build support for ROHM's RPR0521
+ ambient light and proximity sensor device.

- To compile this driver as a module, choose M here:
- the module will be called rpr0521.
+ To compile this driver as a module, choose M here:
+ the module will be called rpr0521.

config SENSORS_LM3533
tristate "LM3533 ambient light sensor"
@@ -269,22 +269,22 @@ config LTR501
select IIO_BUFFER
select IIO_TRIGGERED_BUFFER
help
- If you say yes here you get support for the Lite-On LTR-501ALS-01
- ambient light and proximity sensor. This driver also supports LTR-559
- ALS/PS or LTR-301 ALS sensors.
+ If you say yes here you get support for the Lite-On LTR-501ALS-01
+ ambient light and proximity sensor. This driver also supports LTR-559
+ ALS/PS or LTR-301 ALS sensors.

- This driver can also be built as a module. If so, the module
- will be called ltr501.
+ This driver can also be built as a module. If so, the module
+ will be called ltr501.

config LV0104CS
tristate "LV0104CS Ambient Light Sensor"
depends on I2C
help
- Say Y here if you want to build support for the On Semiconductor
- LV0104CS ambient light sensor.
+ Say Y here if you want to build support for the On Semiconductor
+ LV0104CS ambient light sensor.

- To compile this driver as a module, choose M here:
- the module will be called lv0104cs.
+ To compile this driver as a module, choose M here:
+ the module will be called lv0104cs.

config MAX44000
tristate "MAX44000 Ambient and Infrared Proximity Sensor"
@@ -293,11 +293,11 @@ config MAX44000
select IIO_BUFFER
select IIO_TRIGGERED_BUFFER
help
- Say Y here if you want to build support for Maxim Integrated's
- MAX44000 ambient and infrared proximity sensor device.
+ Say Y here if you want to build support for Maxim Integrated's
+ MAX44000 ambient and infrared proximity sensor device.

- To compile this driver as a module, choose M here:
- the module will be called max44000.
+ To compile this driver as a module, choose M here:
+ the module will be called max44000.

config MAX44009
tristate "MAX44009 Ambient Light Sensor"
@@ -320,15 +320,15 @@ config OPT3001
opt3001.

config PA12203001
- tristate "TXC PA12203001 light and proximity sensor"
- depends on I2C
- select REGMAP_I2C
- help
- If you say yes here you get support for the TXC PA12203001
- ambient light and proximity sensor.
+ tristate "TXC PA12203001 light and proximity sensor"
+ depends on I2C
+ select REGMAP_I2C
+ help
+ If you say yes here you get support for the TXC PA12203001
+ ambient light and proximity sensor.

- This driver can also be built as a module. If so, the module
- will be called pa12203001.
+ This driver can also be built as a module. If so, the module
+ will be called pa12203001.

config SI1133
tristate "SI1133 UV Index Sensor and Ambient Light Sensor"
@@ -359,12 +359,12 @@ config STK3310
depends on I2C
select REGMAP_I2C
help
- Say yes here to get support for the Sensortek STK3310 ambient light
- and proximity sensor. The STK3311 model is also supported by this
- driver.
+ Say yes here to get support for the Sensortek STK3310 ambient light
+ and proximity sensor. The STK3311 model is also supported by this
+ driver.

- Choosing M will build the driver as a module. If so, the module
- will be called stk3310.
+ Choosing M will build the driver as a module. If so, the module
+ will be called stk3310.

config ST_UVIS25
tristate "STMicroelectronics UVIS25 sensor driver"
@@ -396,11 +396,11 @@ config TCS3414
select IIO_BUFFER
select IIO_TRIGGERED_BUFFER
help
- If you say yes here you get support for the TAOS TCS3414
- family of digital color sensors.
+ If you say yes here you get support for the TAOS TCS3414
+ family of digital color sensors.

- This driver can also be built as a module. If so, the module
- will be called tcs3414.
+ This driver can also be built as a module. If so, the module
+ will be called tcs3414.

config TCS3472
tristate "TAOS TCS3472 color light-to-digital converter"
@@ -408,67 +408,67 @@ config TCS3472
select IIO_BUFFER
select IIO_TRIGGERED_BUFFER
help
- If you say yes here you get support for the TAOS TCS3472
- family of color light-to-digital converters with IR filter.
+ If you say yes here you get support for the TAOS TCS3472
+ family of color light-to-digital converters with IR filter.

- This driver can also be built as a module. If so, the module
- will be called tcs3472.
+ This driver can also be built as a module. If so, the module
+ will be called tcs3472.

config SENSORS_TSL2563
tristate "TAOS TSL2560, TSL2561, TSL2562 and TSL2563 ambient light sensors"
depends on I2C
help
- If you say yes here you get support for the Taos TSL2560,
- TSL2561, TSL2562 and TSL2563 ambient light sensors.
+ If you say yes here you get support for the Taos TSL2560,
+ TSL2561, TSL2562 and TSL2563 ambient light sensors.

- This driver can also be built as a module. If so, the module
- will be called tsl2563.
+ This driver can also be built as a module. If so, the module
+ will be called tsl2563.

config TSL2583
tristate "TAOS TSL2580, TSL2581 and TSL2583 light-to-digital converters"
depends on I2C
help
- Provides support for the TAOS tsl2580, tsl2581 and tsl2583 devices.
- Access ALS data via iio, sysfs.
+ Provides support for the TAOS tsl2580, tsl2581 and tsl2583 devices.
+ Access ALS data via iio, sysfs.

config TSL2772
tristate "TAOS TSL/TMD2x71 and TSL/TMD2x72 Family of light and proximity sensors"
depends on I2C
help
- Support for: tsl2571, tsl2671, tmd2671, tsl2771, tmd2771, tsl2572, tsl2672,
- tmd2672, tsl2772, tmd2772 devices.
- Provides iio_events and direct access via sysfs.
+ Support for: tsl2571, tsl2671, tmd2671, tsl2771, tmd2771, tsl2572, tsl2672,
+ tmd2672, tsl2772, tmd2772 devices.
+ Provides iio_events and direct access via sysfs.

config TSL4531
tristate "TAOS TSL4531 ambient light sensors"
depends on I2C
help
- Say Y here if you want to build a driver for the TAOS TSL4531 family
- of ambient light sensors with direct lux output.
+ Say Y here if you want to build a driver for the TAOS TSL4531 family
+ of ambient light sensors with direct lux output.

- To compile this driver as a module, choose M here: the
- module will be called tsl4531.
+ To compile this driver as a module, choose M here: the
+ module will be called tsl4531.

config US5182D
tristate "UPISEMI light and proximity sensor"
depends on I2C
help
- If you say yes here you get support for the UPISEMI US5182D
- ambient light and proximity sensor.
+ If you say yes here you get support for the UPISEMI US5182D
+ ambient light and proximity sensor.

- This driver can also be built as a module. If so, the module
- will be called us5182d.
+ This driver can also be built as a module. If so, the module
+ will be called us5182d.

config VCNL4000
tristate "VCNL4000/4010/4020/4200 combined ALS and proximity sensor"
depends on I2C
help
- Say Y here if you want to build a driver for the Vishay VCNL4000,
- VCNL4010, VCNL4020, VCNL4200 combined ambient light and proximity
- sensor.
+ Say Y here if you want to build a driver for the Vishay VCNL4000,
+ VCNL4010, VCNL4020, VCNL4200 combined ambient light and proximity
+ sensor.

- To compile this driver as a module, choose M here: the
- module will be called vcnl4000.
+ To compile this driver as a module, choose M here: the
+ module will be called vcnl4000.

config VCNL4035
tristate "VCNL4035 combined ALS and proximity sensor"
@@ -476,41 +476,41 @@ config VCNL4035
select REGMAP_I2C
depends on I2C
help
- Say Y here if you want to build a driver for the Vishay VCNL4035,
- combined ambient light (ALS) and proximity sensor. Currently only ALS
- function is available.
+ Say Y here if you want to build a driver for the Vishay VCNL4035,
+ combined ambient light (ALS) and proximity sensor. Currently only ALS
+ function is available.

- To compile this driver as a module, choose M here: the
- module will be called vcnl4035.
+ To compile this driver as a module, choose M here: the
+ module will be called vcnl4035.

config VEML6070
tristate "VEML6070 UV A light sensor"
depends on I2C
help
- Say Y here if you want to build a driver for the Vishay VEML6070 UV A
- light sensor.
+ Say Y here if you want to build a driver for the Vishay VEML6070 UV A
+ light sensor.

- To compile this driver as a module, choose M here: the
- module will be called veml6070.
+ To compile this driver as a module, choose M here: the
+ module will be called veml6070.

config VL6180
tristate "VL6180 ALS, range and proximity sensor"
depends on I2C
help
- Say Y here if you want to build a driver for the STMicroelectronics
- VL6180 combined ambient light, range and proximity sensor.
+ Say Y here if you want to build a driver for the STMicroelectronics
+ VL6180 combined ambient light, range and proximity sensor.

- To compile this driver as a module, choose M here: the
- module will be called vl6180.
+ To compile this driver as a module, choose M here: the
+ module will be called vl6180.

config ZOPT2201
tristate "ZOPT2201 ALS and UV B sensor"
depends on I2C
help
- Say Y here if you want to build a driver for the IDT
- ZOPT2201 ambient light and UV B sensor.
+ Say Y here if you want to build a driver for the IDT
+ ZOPT2201 ambient light and UV B sensor.

- To compile this driver as a module, choose M here: the
- module will be called zopt2201.
+ To compile this driver as a module, choose M here: the
+ module will be called zopt2201.

endmenu
diff --git a/drivers/iio/potentiometer/Kconfig b/drivers/iio/potentiometer/Kconfig
index 6303cbe..a81a3a1 100644
--- a/drivers/iio/potentiometer/Kconfig
+++ b/drivers/iio/potentiometer/Kconfig
@@ -26,26 +26,26 @@ config DS1803
module will be called ds1803.

config MAX5481
- tristate "Maxim MAX5481-MAX5484 Digital Potentiometer driver"
- depends on SPI
- help
- Say yes here to build support for the Maxim
- MAX5481, MAX5482, MAX5483, MAX5484 digital potentiometer
- chips.
+ tristate "Maxim MAX5481-MAX5484 Digital Potentiometer driver"
+ depends on SPI
+ help
+ Say yes here to build support for the Maxim
+ MAX5481, MAX5482, MAX5483, MAX5484 digital potentiometer
+ chips.

- To compile this driver as a module, choose M here: the
- module will be called max5481.
+ To compile this driver as a module, choose M here: the
+ module will be called max5481.

config MAX5487
- tristate "Maxim MAX5487/MAX5488/MAX5489 Digital Potentiometer driver"
- depends on SPI
- help
- Say yes here to build support for the Maxim
- MAX5487, MAX5488, MAX5489 digital potentiometer
- chips.
-
- To compile this driver as a module, choose M here: the
- module will be called max5487.
+ tristate "Maxim MAX5487/MAX5488/MAX5489 Digital Potentiometer driver"
+ depends on SPI
+ help
+ Say yes here to build support for the Maxim
+ MAX5487, MAX5488, MAX5489 digital potentiometer
+ chips.
+
+ To compile this driver as a module, choose M here: the
+ module will be called max5487.

config MCP4018
tristate "Microchip MCP4017/18/19 Digital Potentiometer driver"
diff --git a/drivers/iio/temperature/Kconfig b/drivers/iio/temperature/Kconfig
index 82e4a62..7f0b826 100644
--- a/drivers/iio/temperature/Kconfig
+++ b/drivers/iio/temperature/Kconfig
@@ -66,14 +66,14 @@ config TMP006
be called tmp006.

config TMP007
- tristate "TMP007 infrared thermopile sensor with Integrated Math Engine"
- depends on I2C
- help
- If you say yes here you get support for the Texas Instruments
- TMP007 infrared thermopile sensor with Integrated Math Engine.
-
- This driver can also be built as a module. If so, the module will
- be called tmp007.
+ tristate "TMP007 infrared thermopile sensor with Integrated Math Engine"
+ depends on I2C
+ help
+ If you say yes here you get support for the Texas Instruments
+ TMP007 infrared thermopile sensor with Integrated Math Engine.
+
+ This driver can also be built as a module. If so, the module will
+ be called tmp007.

config TSYS01
tristate "Measurement Specialties TSYS01 temperature sensor using I2C bus connection"
--
1.9.1