[PATCH 074/114] drivers: md: Kconfig: pedantic formatting
From: Enrico Weigelt, metux IT consult
Date: Mon Mar 11 2019 - 09:23:30 EST
Formatting of Kconfig files doesn't look so pretty, so let the
Great White Handkerchief come around and clean it up.
Signed-off-by: Enrico Weigelt, metux IT consult <info@xxxxxxxxx>
---
drivers/md/Kconfig | 236 ++++++++++++++++++-------------------
drivers/md/persistent-data/Kconfig | 15 ++-
2 files changed, 125 insertions(+), 126 deletions(-)
diff --git a/drivers/md/Kconfig b/drivers/md/Kconfig
index 2557f19..e7e1596 100644
--- a/drivers/md/Kconfig
+++ b/drivers/md/Kconfig
@@ -37,9 +37,9 @@ config MD_AUTODETECT
default y
---help---
If you say Y here, then the kernel will try to autodetect raid
- arrays as part of its boot process.
+ arrays as part of its boot process.
- If you don't use raid and say Y, this autodetection can cause
+ If you don't use raid and say Y, this autodetection can cause
a several-second delay in the boot time due to various
synchronisation steps that are part of this step.
@@ -183,15 +183,15 @@ config MD_CLUSTER
depends on DLM
default n
---help---
- Clustering support for MD devices. This enables locking and
- synchronization across multiple systems on the cluster, so all
- nodes in the cluster can access the MD devices simultaneously.
+ Clustering support for MD devices. This enables locking and
+ synchronization across multiple systems on the cluster, so all
+ nodes in the cluster can access the MD devices simultaneously.
- This brings the redundancy (and uptime) of RAID levels across the
- nodes of the cluster. Currently, it can work with raid1 and raid10
- (limited support).
+ This brings the redundancy (and uptime) of RAID levels across the
+ nodes of the cluster. Currently, it can work with raid1 and raid10
+ (limited support).
- If unsure, say N.
+ If unsure, say N.
source "drivers/md/bcache/Kconfig"
@@ -224,44 +224,44 @@ config DM_DEBUG
If unsure, say N.
config DM_BUFIO
- tristate
- depends on BLK_DEV_DM
- ---help---
- This interface allows you to do buffered I/O on a device and acts
- as a cache, holding recently-read blocks in memory and performing
- delayed writes.
+ tristate
+ depends on BLK_DEV_DM
+ ---help---
+ This interface allows you to do buffered I/O on a device and acts
+ as a cache, holding recently-read blocks in memory and performing
+ delayed writes.
config DM_DEBUG_BLOCK_MANAGER_LOCKING
- bool "Block manager locking"
- depends on DM_BUFIO
- ---help---
- Block manager locking can catch various metadata corruption issues.
+ bool "Block manager locking"
+ depends on DM_BUFIO
+ ---help---
+ Block manager locking can catch various metadata corruption issues.
- If unsure, say N.
+ If unsure, say N.
config DM_DEBUG_BLOCK_STACK_TRACING
- bool "Keep stack trace of persistent data block lock holders"
- depends on STACKTRACE_SUPPORT && DM_DEBUG_BLOCK_MANAGER_LOCKING
- select STACKTRACE
- ---help---
- Enable this for messages that may help debug problems with the
- block manager locking used by thin provisioning and caching.
+ bool "Keep stack trace of persistent data block lock holders"
+ depends on STACKTRACE_SUPPORT && DM_DEBUG_BLOCK_MANAGER_LOCKING
+ select STACKTRACE
+ ---help---
+ Enable this for messages that may help debug problems with the
+ block manager locking used by thin provisioning and caching.
- If unsure, say N.
+ If unsure, say N.
config DM_BIO_PRISON
- tristate
- depends on BLK_DEV_DM
- ---help---
- Some bio locking schemes used by other device-mapper targets
- including thin provisioning.
+ tristate
+ depends on BLK_DEV_DM
+ ---help---
+ Some bio locking schemes used by other device-mapper targets
+ including thin provisioning.
source "drivers/md/persistent-data/Kconfig"
config DM_UNSTRIPED
- tristate "Unstriped target"
- depends on BLK_DEV_DM
- ---help---
+ tristate "Unstriped target"
+ depends on BLK_DEV_DM
+ ---help---
Unstripes I/O so it is issued solely on a single drive in a HW
RAID0 or dm-striped target.
@@ -284,73 +284,73 @@ config DM_CRYPT
If unsure, say N.
config DM_SNAPSHOT
- tristate "Snapshot target"
- depends on BLK_DEV_DM
- select DM_BUFIO
- ---help---
- Allow volume managers to take writable snapshots of a device.
+ tristate "Snapshot target"
+ depends on BLK_DEV_DM
+ select DM_BUFIO
+ ---help---
+ Allow volume managers to take writable snapshots of a device.
config DM_THIN_PROVISIONING
- tristate "Thin provisioning target"
- depends on BLK_DEV_DM
- select DM_PERSISTENT_DATA
- select DM_BIO_PRISON
- ---help---
- Provides thin provisioning and snapshots that share a data store.
+ tristate "Thin provisioning target"
+ depends on BLK_DEV_DM
+ select DM_PERSISTENT_DATA
+ select DM_BIO_PRISON
+ ---help---
+ Provides thin provisioning and snapshots that share a data store.
config DM_CACHE
- tristate "Cache target (EXPERIMENTAL)"
- depends on BLK_DEV_DM
- default n
- select DM_PERSISTENT_DATA
- select DM_BIO_PRISON
- ---help---
- dm-cache attempts to improve performance of a block device by
- moving frequently used data to a smaller, higher performance
- device. Different 'policy' plugins can be used to change the
- algorithms used to select which blocks are promoted, demoted,
- cleaned etc. It supports writeback and writethrough modes.
+ tristate "Cache target (EXPERIMENTAL)"
+ depends on BLK_DEV_DM
+ default n
+ select DM_PERSISTENT_DATA
+ select DM_BIO_PRISON
+ ---help---
+ dm-cache attempts to improve performance of a block device by
+ moving frequently used data to a smaller, higher performance
+ device. Different 'policy' plugins can be used to change the
+ algorithms used to select which blocks are promoted, demoted,
+ cleaned etc. It supports writeback and writethrough modes.
config DM_CACHE_SMQ
- tristate "Stochastic MQ Cache Policy (EXPERIMENTAL)"
- depends on DM_CACHE
- default y
- ---help---
- A cache policy that uses a multiqueue ordered by recent hits
- to select which blocks should be promoted and demoted.
- This is meant to be a general purpose policy. It prioritises
- reads over writes. This SMQ policy (vs MQ) offers the promise
- of less memory utilization, improved performance and increased
- adaptability in the face of changing workloads.
+ tristate "Stochastic MQ Cache Policy (EXPERIMENTAL)"
+ depends on DM_CACHE
+ default y
+ ---help---
+ A cache policy that uses a multiqueue ordered by recent hits
+ to select which blocks should be promoted and demoted.
+ This is meant to be a general purpose policy. It prioritises
+ reads over writes. This SMQ policy (vs MQ) offers the promise
+ of less memory utilization, improved performance and increased
+ adaptability in the face of changing workloads.
config DM_WRITECACHE
tristate "Writecache target"
depends on BLK_DEV_DM
---help---
- The writecache target caches writes on persistent memory or SSD.
- It is intended for databases or other programs that need extremely
- low commit latency.
+ The writecache target caches writes on persistent memory or SSD.
+ It is intended for databases or other programs that need extremely
+ low commit latency.
- The writecache target doesn't cache reads because reads are supposed
- to be cached in standard RAM.
+ The writecache target doesn't cache reads because reads are supposed
+ to be cached in standard RAM.
config DM_ERA
- tristate "Era target (EXPERIMENTAL)"
- depends on BLK_DEV_DM
- default n
- select DM_PERSISTENT_DATA
- select DM_BIO_PRISON
- ---help---
- dm-era tracks which parts of a block device are written to
- over time. Useful for maintaining cache coherency when using
- vendor snapshots.
+ tristate "Era target (EXPERIMENTAL)"
+ depends on BLK_DEV_DM
+ default n
+ select DM_PERSISTENT_DATA
+ select DM_BIO_PRISON
+ ---help---
+ dm-era tracks which parts of a block device are written to
+ over time. Useful for maintaining cache coherency when using
+ vendor snapshots.
config DM_MIRROR
- tristate "Mirror target"
- depends on BLK_DEV_DM
- ---help---
- Allow volume managers to mirror logical volumes, also
- needed for live data migration tools such as 'pvmove'.
+ tristate "Mirror target"
+ depends on BLK_DEV_DM
+ ---help---
+ Allow volume managers to mirror logical volumes, also
+ needed for live data migration tools such as 'pvmove'.
config DM_LOG_USERSPACE
tristate "Mirror userspace logging"
@@ -364,31 +364,31 @@ config DM_LOG_USERSPACE
by leveraging this framework.
config DM_RAID
- tristate "RAID 1/4/5/6/10 target"
- depends on BLK_DEV_DM
- select MD_RAID0
- select MD_RAID1
- select MD_RAID10
- select MD_RAID456
- select BLK_DEV_MD
- ---help---
- A dm target that supports RAID1, RAID10, RAID4, RAID5 and RAID6 mappings
-
- A RAID-5 set of N drives with a capacity of C MB per drive provides
- the capacity of C * (N - 1) MB, and protects against a failure
- of a single drive. For a given sector (row) number, (N - 1) drives
- contain data sectors, and one drive contains the parity protection.
- For a RAID-4 set, the parity blocks are present on a single drive,
- while a RAID-5 set distributes the parity across the drives in one
- of the available parity distribution methods.
-
- A RAID-6 set of N drives with a capacity of C MB per drive
- provides the capacity of C * (N - 2) MB, and protects
- against a failure of any two drives. For a given sector
- (row) number, (N - 2) drives contain data sectors, and two
- drives contains two independent redundancy syndromes. Like
- RAID-5, RAID-6 distributes the syndromes across the drives
- in one of the available parity distribution methods.
+ tristate "RAID 1/4/5/6/10 target"
+ depends on BLK_DEV_DM
+ select MD_RAID0
+ select MD_RAID1
+ select MD_RAID10
+ select MD_RAID456
+ select BLK_DEV_MD
+ ---help---
+ A dm target that supports RAID1, RAID10, RAID4, RAID5 and RAID6 mappings
+
+ A RAID-5 set of N drives with a capacity of C MB per drive provides
+ the capacity of C * (N - 1) MB, and protects against a failure
+ of a single drive. For a given sector (row) number, (N - 1) drives
+ contain data sectors, and one drive contains the parity protection.
+ For a RAID-4 set, the parity blocks are present on a single drive,
+ while a RAID-5 set distributes the parity across the drives in one
+ of the available parity distribution methods.
+
+ A RAID-6 set of N drives with a capacity of C MB per drive
+ provides the capacity of C * (N - 2) MB, and protects
+ against a failure of any two drives. For a given sector
+ (row) number, (N - 2) drives contain data sectors, and two
+ drives contains two independent redundancy syndromes. Like
+ RAID-5, RAID-6 distributes the syndromes across the drives
+ in one of the available parity distribution methods.
config DM_ZERO
tristate "Zero target"
@@ -431,10 +431,10 @@ config DM_DELAY
tristate "I/O delaying target"
depends on BLK_DEV_DM
---help---
- A target that delays reads and/or writes and can send
- them to different devices. Useful for testing.
+ A target that delays reads and/or writes and can send
+ them to different devices. Useful for testing.
- If unsure, say N.
+ If unsure, say N.
config DM_INIT
bool "DM \"dm-mod.create=\" parameter support"
@@ -455,10 +455,10 @@ config DM_UEVENT
Generate udev events for DM events.
config DM_FLAKEY
- tristate "Flakey target"
- depends on BLK_DEV_DM
- ---help---
- A target that intermittently fails I/O for debugging purposes.
+ tristate "Flakey target"
+ depends on BLK_DEV_DM
+ ---help---
+ A target that intermittently fails I/O for debugging purposes.
config DM_VERITY
tristate "Verity target support"
diff --git a/drivers/md/persistent-data/Kconfig b/drivers/md/persistent-data/Kconfig
index a53cbc9..28b77ee 100644
--- a/drivers/md/persistent-data/Kconfig
+++ b/drivers/md/persistent-data/Kconfig
@@ -1,9 +1,8 @@
config DM_PERSISTENT_DATA
- tristate
- depends on BLK_DEV_DM
- select LIBCRC32C
- select DM_BUFIO
- ---help---
- Library providing immutable on-disk data structure support for
- device-mapper targets such as the thin provisioning target.
-
+ tristate
+ depends on BLK_DEV_DM
+ select LIBCRC32C
+ select DM_BUFIO
+ ---help---
+ Library providing immutable on-disk data structure support for
+ device-mapper targets such as the thin provisioning target.
--
1.9.1