[PATCH 055/114] drivers: crypto: Kconfig: pedantic formatting

[Enrico Weigelt, metux IT consult]

Formatting of Kconfig files doesn't look so pretty, so let the
Great White Handkerchief come around and clean it up.

Signed-off-by: Enrico Weigelt, metux IT consult <info@xxxxxxxxx>
---
 drivers/crypto/Kconfig         | 28 ++++++++++++++--------------
 drivers/crypto/caam/Kconfig    | 18 +++++++++---------
 drivers/crypto/ccp/Kconfig     | 10 +++++-----
 drivers/crypto/chelsio/Kconfig | 30 +++++++++++++++---------------
 drivers/crypto/stm32/Kconfig   |  6 +++---
 drivers/crypto/ux500/Kconfig   | 16 ++++++++--------
 6 files changed, 54 insertions(+), 54 deletions(-)

diff --git a/drivers/crypto/Kconfig b/drivers/crypto/Kconfig
index 0be55fc..ddbfff5 100644
--- a/drivers/crypto/Kconfig
+++ b/drivers/crypto/Kconfig
@@ -18,7 +18,7 @@ config CRYPTO_DEV_PADLOCK
 	  (so called VIA PadLock ACE, Advanced Cryptography Engine)
 	  that provides instructions for very fast cryptographic
 	  operations with supported algorithms.
-	  
+
 	  The instructions are used only when the CPU supports them.
 	  Otherwise software encryption is used.
 
@@ -225,15 +225,15 @@ config CRYPTO_DEV_MARVELL_CESA
 	  This driver supports CPU offload through DMA transfers.
 
 config CRYPTO_DEV_NIAGARA2
-       tristate "Niagara2 Stream Processing Unit driver"
-       select CRYPTO_DES
-       select CRYPTO_BLKCIPHER
-       select CRYPTO_HASH
-       select CRYPTO_MD5
-       select CRYPTO_SHA1
-       select CRYPTO_SHA256
-       depends on SPARC64
-       help
+	tristate "Niagara2 Stream Processing Unit driver"
+	select CRYPTO_DES
+	select CRYPTO_BLKCIPHER
+	select CRYPTO_HASH
+	select CRYPTO_MD5
+	select CRYPTO_SHA1
+	select CRYPTO_SHA256
+	depends on SPARC64
+	help
 	  Each core of a Niagara2 processor contains a Stream
 	  Processing Unit, which itself contains several cryptographic
 	  sub-units.  One set provides the Modular Arithmetic Unit,
@@ -324,15 +324,15 @@ config HW_RANDOM_PPC4XX
 	depends on CRYPTO_DEV_PPC4XX && HW_RANDOM
 	default y
 	---help---
-	 This option provides the kernel-side support for the TRNG hardware
-	 found in the security function of some PowerPC 4xx SoCs.
+	  This option provides the kernel-side support for the TRNG hardware
+	  found in the security function of some PowerPC 4xx SoCs.
 
 config CRYPTO_DEV_OMAP
 	tristate "Support for OMAP crypto HW accelerators"
 	depends on ARCH_OMAP2PLUS
 	help
 	  OMAP processors have various crypto HW accelerators. Select this if
-          you want to use the OMAP modules for any of the crypto algorithms.
+	  you want to use the OMAP modules for any of the crypto algorithms.
 
 if CRYPTO_DEV_OMAP
 
@@ -605,7 +605,7 @@ config CRYPTO_DEV_QCOM_RNG
 	  Generator hardware found on Qualcomm SoCs.
 
 	  To compile this driver as a module, choose M here. The
-          module will be called qcom-rng. If unsure, say N.
+	  module will be called qcom-rng. If unsure, say N.
 
 config CRYPTO_DEV_VMX
 	bool "Support for VMX cryptographic acceleration instructions"
diff --git a/drivers/crypto/caam/Kconfig b/drivers/crypto/caam/Kconfig
index 577c984..b904069 100644
--- a/drivers/crypto/caam/Kconfig
+++ b/drivers/crypto/caam/Kconfig
@@ -129,15 +129,15 @@ config CRYPTO_DEV_FSL_CAAM_AHASH_API
 	  will be called caamhash.
 
 config CRYPTO_DEV_FSL_CAAM_PKC_API
-        tristate "Register public key cryptography implementations with Crypto API"
-        default y
-        select CRYPTO_RSA
-        help
-          Selecting this will allow SEC Public key support for RSA.
-          Supported cryptographic primitives: encryption, decryption,
-          signature and verification.
-          To compile this as a module, choose M here: the module
-          will be called caam_pkc.
+	tristate "Register public key cryptography implementations with Crypto API"
+	default y
+	select CRYPTO_RSA
+	help
+	  Selecting this will allow SEC Public key support for RSA.
+	  Supported cryptographic primitives: encryption, decryption,
+	  signature and verification.
+	  To compile this as a module, choose M here: the module
+	  will be called caam_pkc.
 
 config CRYPTO_DEV_FSL_CAAM_RNG_API
 	tristate "Register caam device for hwrng API"
diff --git a/drivers/crypto/ccp/Kconfig b/drivers/crypto/ccp/Kconfig
index b9dfae4..f9272ee 100644
--- a/drivers/crypto/ccp/Kconfig
+++ b/drivers/crypto/ccp/Kconfig
@@ -39,8 +39,8 @@ config CRYPTO_DEV_SP_PSP
 	default y
 	depends on CRYPTO_DEV_CCP_DD && X86_64
 	help
-	 Provide support for the AMD Platform Security Processor (PSP).
-	 The PSP is a dedicated processor that provides support for key
-	 management commands in Secure Encrypted Virtualization (SEV) mode,
-	 along with software-based Trusted Execution Environment (TEE) to
-	 enable third-party trusted applications.
+	  Provide support for the AMD Platform Security Processor (PSP).
+	  The PSP is a dedicated processor that provides support for key
+	  management commands in Secure Encrypted Virtualization (SEV) mode,
+	  along with software-based Trusted Execution Environment (TEE) to
+	  enable third-party trusted applications.
diff --git a/drivers/crypto/chelsio/Kconfig b/drivers/crypto/chelsio/Kconfig
index 930d82d..6f461d13 100644
--- a/drivers/crypto/chelsio/Kconfig
+++ b/drivers/crypto/chelsio/Kconfig
@@ -21,22 +21,22 @@ config CRYPTO_DEV_CHELSIO
 	  will be called chcr.
 
 config CHELSIO_IPSEC_INLINE
-        bool "Chelsio IPSec XFRM Tx crypto offload"
-        depends on CHELSIO_T4
+	bool "Chelsio IPSec XFRM Tx crypto offload"
+	depends on CHELSIO_T4
 	depends on CRYPTO_DEV_CHELSIO
-        depends on XFRM_OFFLOAD
-        depends on INET_ESP_OFFLOAD || INET6_ESP_OFFLOAD
-        default n
-        ---help---
-          Enable support for IPSec Tx Inline.
+	depends on XFRM_OFFLOAD
+	depends on INET_ESP_OFFLOAD || INET6_ESP_OFFLOAD
+	default n
+	---help---
+	  Enable support for IPSec Tx Inline.
 
 config CRYPTO_DEV_CHELSIO_TLS
-        tristate "Chelsio Crypto Inline TLS Driver"
-        depends on CHELSIO_T4
-        depends on TLS
-        select CRYPTO_DEV_CHELSIO
-        ---help---
-          Support Chelsio Inline TLS with Chelsio crypto accelerator.
+	tristate "Chelsio Crypto Inline TLS Driver"
+	depends on CHELSIO_T4
+	depends on TLS
+	select CRYPTO_DEV_CHELSIO
+	---help---
+	  Support Chelsio Inline TLS with Chelsio crypto accelerator.
 
-          To compile this driver as a module, choose M here: the module
-          will be called chtls.
+	  To compile this driver as a module, choose M here: the module
+	  will be called chtls.
diff --git a/drivers/crypto/stm32/Kconfig b/drivers/crypto/stm32/Kconfig
index 63aa78c..1197138 100644
--- a/drivers/crypto/stm32/Kconfig
+++ b/drivers/crypto/stm32/Kconfig
@@ -3,7 +3,7 @@ config CRYPTO_DEV_STM32_CRC
 	depends on ARCH_STM32
 	select CRYPTO_HASH
 	help
-          This enables support for the CRC32 hw accelerator which can be found
+	  This enables support for the CRC32 hw accelerator which can be found
 	  on STMicroelectronics STM32 SOC.
 
 config CRYPTO_DEV_STM32_HASH
@@ -16,7 +16,7 @@ config CRYPTO_DEV_STM32_HASH
 	select CRYPTO_SHA256
 	select CRYPTO_ENGINE
 	help
-          This enables support for the HASH hw accelerator which can be found
+	  This enables support for the HASH hw accelerator which can be found
 	  on STMicroelectronics STM32 SOC.
 
 config CRYPTO_DEV_STM32_CRYP
@@ -25,5 +25,5 @@ config CRYPTO_DEV_STM32_CRYP
 	select CRYPTO_HASH
 	select CRYPTO_ENGINE
 	help
-          This enables support for the CRYP (AES/DES/TDES) hw accelerator which
+	  This enables support for the CRYP (AES/DES/TDES) hw accelerator which
 	  can be found on STMicroelectronics STM32 SOC.
diff --git a/drivers/crypto/ux500/Kconfig b/drivers/crypto/ux500/Kconfig
index 0e338bf..eca3391 100644
--- a/drivers/crypto/ux500/Kconfig
+++ b/drivers/crypto/ux500/Kconfig
@@ -11,18 +11,18 @@ config CRYPTO_DEV_UX500_CRYP
 	select CRYPTO_BLKCIPHER
 	select CRYPTO_DES
 	help
-        This selects the crypto driver for the UX500_CRYP hardware. It supports
-        AES-ECB, CBC and CTR with keys sizes of 128, 192 and 256 bit sizes.
+	This selects the crypto driver for the UX500_CRYP hardware. It supports
+	AES-ECB, CBC and CTR with keys sizes of 128, 192 and 256 bit sizes.
 
 config CRYPTO_DEV_UX500_HASH
-        tristate "UX500 crypto driver for HASH block"
-        depends on CRYPTO_DEV_UX500
-        select CRYPTO_HASH
+	tristate "UX500 crypto driver for HASH block"
+	depends on CRYPTO_DEV_UX500
+	select CRYPTO_HASH
 	select CRYPTO_SHA1
 	select CRYPTO_SHA256
-        help
-          This selects the hash driver for the UX500_HASH hardware.
-          Depends on UX500/STM DMA if running in DMA mode.
+	help
+	  This selects the hash driver for the UX500_HASH hardware.
+	  Depends on UX500/STM DMA if running in DMA mode.
 
 config CRYPTO_DEV_UX500_DEBUG
 	bool "Activate ux500 platform debug-mode for crypto and hash block"
-- 
1.9.1