[PATCH 003/114] drivers: input: Kconfig: pedantic formatting

From: Enrico Weigelt, metux IT consult
Date: Mon Mar 11 2019 - 09:31:57 EST

Next message: Bjorn Helgaas: "Re: [PATCHv4 00/28] PCI: refactor Mobiveil driver and add PCIe Gen4 driver for NXP Layerscape SoCs"
Previous message: Paolo Bonzini: "Re: [PATCH v4 17/17] kvm: vmx: Emulate TEST_CTL MSR"
In reply to: Enrico Weigelt, metux IT consult: "[PATCH 007/114] drivers: leds: Kconfig: pedantic formatting"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]

Formatting of Kconfig files doesn't look so pretty, so let the
Great White Handkerchief come around and clean it up.

Signed-off-by: Enrico Weigelt, metux IT consult <info@xxxxxxxxx>
---
drivers/input/keyboard/Kconfig | 16 ++++++++--------
drivers/input/misc/Kconfig | 26 +++++++++++++-------------
drivers/input/mouse/Kconfig | 26 +++++++++++++-------------
drivers/input/serio/Kconfig | 2 +-
drivers/input/tablet/Kconfig | 20 ++++++++++----------
drivers/input/touchscreen/Kconfig | 2 +-
6 files changed, 46 insertions(+), 46 deletions(-)

diff --git a/drivers/input/keyboard/Kconfig b/drivers/input/keyboard/Kconfig
index a878351..ef39f5c 100644
--- a/drivers/input/keyboard/Kconfig
+++ b/drivers/input/keyboard/Kconfig
@@ -138,14 +138,14 @@ config KEYBOARD_ATKBD_RDI_KEYCODES
left-hand column.

config KEYBOARD_QT1070
- tristate "Atmel AT42QT1070 Touch Sensor Chip"
- depends on I2C
- help
- Say Y here if you want to use Atmel AT42QT1070 QTouch
- Sensor chip as input device.
-
- To compile this driver as a module, choose M here:
- the module will be called qt1070
+ tristate "Atmel AT42QT1070 Touch Sensor Chip"
+ depends on I2C
+ help
+ Say Y here if you want to use Atmel AT42QT1070 QTouch
+ Sensor chip as input device.
+
+ To compile this driver as a module, choose M here:
+ the module will be called qt1070

config KEYBOARD_QT2160
tristate "Atmel AT42QT2160 Touch Sensor Chip"
diff --git a/drivers/input/misc/Kconfig b/drivers/input/misc/Kconfig
index 279fb02..9cf3bac 100644
--- a/drivers/input/misc/Kconfig
+++ b/drivers/input/misc/Kconfig
@@ -240,13 +240,13 @@ config INPUT_APANEL
select INPUT_POLLDEV
select CHECK_SIGNATURE
help
- Say Y here for support of the Application Panel buttons, used on
- Fujitsu Lifebook. These are attached to the mainboard through
- an SMBus interface managed by the I2C Intel ICH (i801) driver,
- which you should also build for this kernel.
+ Say Y here for support of the Application Panel buttons, used on
+ Fujitsu Lifebook. These are attached to the mainboard through
+ an SMBus interface managed by the I2C Intel ICH (i801) driver,
+ which you should also build for this kernel.

- To compile this driver as a module, choose M here: the module will
- be called apanel.
+ To compile this driver as a module, choose M here: the module will
+ be called apanel.

config INPUT_GP2A
tristate "Sharp GP2AP002A00F I2C Proximity/Opto sensor driver"
@@ -273,12 +273,12 @@ config INPUT_GPIO_DECODER
depends on GPIOLIB || COMPILE_TEST
select INPUT_POLLDEV
help
- Say Y here if you want driver to read status of multiple GPIO
- lines and report the encoded value as an absolute integer to
- input subsystem.
+ Say Y here if you want driver to read status of multiple GPIO
+ lines and report the encoded value as an absolute integer to
+ input subsystem.

- To compile this driver as a module, choose M here: the module
- will be called gpio_decoder.
+ To compile this driver as a module, choose M here: the module
+ will be called gpio_decoder.

config INPUT_IXP4XX_BEEPER
tristate "IXP4XX Beeper support"
@@ -543,8 +543,8 @@ config INPUT_PCF50633_PMU
tristate "PCF50633 PMU events"
depends on MFD_PCF50633
help
- Say Y to include support for delivering PMU events via input
- layer on NXP PCF50633.
+ Say Y to include support for delivering PMU events via input
+ layer on NXP PCF50633.

config INPUT_PCF8574
tristate "PCF8574 Keypad input device"
diff --git a/drivers/input/mouse/Kconfig b/drivers/input/mouse/Kconfig
index 566a1e3..8b7a7e0 100644
--- a/drivers/input/mouse/Kconfig
+++ b/drivers/input/mouse/Kconfig
@@ -91,14 +91,14 @@ config MOUSE_PS2_SYNAPTICS_SMBUS
If unsure, say Y.

config MOUSE_PS2_CYPRESS
- bool "Cypress PS/2 mouse protocol extension" if EXPERT
- default y
- depends on MOUSE_PS2
- help
- Say Y here if you have a Cypress PS/2 Trackpad connected to
- your system.
+ bool "Cypress PS/2 mouse protocol extension" if EXPERT
+ default y
+ depends on MOUSE_PS2
+ help
+ Say Y here if you have a Cypress PS/2 Trackpad connected to
+ your system.

- If unsure, say Y.
+ If unsure, say Y.

config MOUSE_PS2_LIFEBOOK
bool "Fujitsu Lifebook PS/2 mouse protocol extension" if EXPERT
@@ -285,19 +285,19 @@ config MOUSE_ELAN_I2C_I2C
depends on MOUSE_ELAN_I2C
default y
help
- Say Y here if Elan Touchpad in your system is connected to
- a standard I2C controller.
+ Say Y here if Elan Touchpad in your system is connected to
+ a standard I2C controller.

- If unsure, say Y.
+ If unsure, say Y.

config MOUSE_ELAN_I2C_SMBUS
bool "Enable SMbus support"
depends on MOUSE_ELAN_I2C
help
- Say Y here if Elan Touchpad in your system is connected to
- a SMbus adapter.
+ Say Y here if Elan Touchpad in your system is connected to
+ a SMbus adapter.

- If unsure, say Y.
+ If unsure, say Y.

config MOUSE_INPORT
tristate "InPort/MS/ATIXL busmouse"
diff --git a/drivers/input/serio/Kconfig b/drivers/input/serio/Kconfig
index c9c7224..b29cb49 100644
--- a/drivers/input/serio/Kconfig
+++ b/drivers/input/serio/Kconfig
@@ -7,7 +7,7 @@ config SERIO
help
Say Yes here if you have any input device that uses serial I/O to
communicate with the system. This includes the
- * standard AT keyboard and PS/2 mouse *
+ * standard AT keyboard and PS/2 mouse *
as well as serial mice, Sun keyboards, some joysticks and 6dof
devices and more.

diff --git a/drivers/input/tablet/Kconfig b/drivers/input/tablet/Kconfig
index a2b9f97..df427d1 100644
--- a/drivers/input/tablet/Kconfig
+++ b/drivers/input/tablet/Kconfig
@@ -38,16 +38,16 @@ config TABLET_USB_AIPTEK
module will be called aiptek.

config TABLET_USB_GTCO
- tristate "GTCO CalComp/InterWrite USB Support"
- depends on USB && INPUT
- help
- Say Y here if you want to use the USB version of the GTCO
- CalComp/InterWrite Tablet. Make sure to say Y to "Mouse support"
- (CONFIG_INPUT_MOUSEDEV) and/or "Event interface support"
- (CONFIG_INPUT_EVDEV) as well.
-
- To compile this driver as a module, choose M here: the
- module will be called gtco.
+ tristate "GTCO CalComp/InterWrite USB Support"
+ depends on USB && INPUT
+ help
+ Say Y here if you want to use the USB version of the GTCO
+ CalComp/InterWrite Tablet. Make sure to say Y to "Mouse support"
+ (CONFIG_INPUT_MOUSEDEV) and/or "Event interface support"
+ (CONFIG_INPUT_EVDEV) as well.
+
+ To compile this driver as a module, choose M here: the
+ module will be called gtco.

config TABLET_USB_HANWANG
tristate "Hanwang Art Master III tablet support (USB)"
diff --git a/drivers/input/touchscreen/Kconfig b/drivers/input/touchscreen/Kconfig
index 068dbbc..11ca597 100644
--- a/drivers/input/touchscreen/Kconfig
+++ b/drivers/input/touchscreen/Kconfig
@@ -632,7 +632,7 @@ config TOUCHSCREEN_HP600
depends on SH_HP6XX && SH_ADC
help
Say Y here if you have a HP Jornada 620/660/680/690 and want to
- support the built-in touchscreen.
+ support the built-in touchscreen.

To compile this driver as a module, choose M here: the
module will be called hp680_ts_input.
--
1.9.1

Next message: Bjorn Helgaas: "Re: [PATCHv4 00/28] PCI: refactor Mobiveil driver and add PCIe Gen4 driver for NXP Layerscape SoCs"
Previous message: Paolo Bonzini: "Re: [PATCH v4 17/17] kvm: vmx: Emulate TEST_CTL MSR"
In reply to: Enrico Weigelt, metux IT consult: "[PATCH 007/114] drivers: leds: Kconfig: pedantic formatting"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]