Re: [PATCH 03/25] dt-bindings: leds: Add LED_FUNCTION definitions

[Jacek Anaszewski]

Hi Dan,

Thanks for the review.

On 3/11/19 1:22 PM, Dan Murphy wrote:
> Jacek
>
> On 3/10/19 1:28 PM, Jacek Anaszewski wrote:
> > Add common LED function definitions for use in Device Tree.
> > The function names were extracted from existing dts files
> > after eliminating oddities.
> >
> > Signed-off-by: Jacek Anaszewski <jacek.anaszewski@xxxxxxxxx>
> > Cc: Baolin Wang <baolin.wang@xxxxxxxxxx>
> > Cc: Daniel Mack <daniel@xxxxxxxxxx>
> > Cc: Dan Murphy <dmurphy@xxxxxx>
> > Cc: Linus Walleij <linus.walleij@xxxxxxxxxx>
> > Cc: Oleh Kravchenko <oleg@xxxxxxxxxx>
> > Cc: Sakari Ailus <sakari.ailus@xxxxxxxxxxxxxxx>
> > Cc: Simon Shields <simon@xxxxxxxxxxxxx>
> > ---
> >   include/dt-bindings/leds/common.h | 38 ++++++++++++++++++++++++++++++++++++++
> >   1 file changed, 38 insertions(+)
> >
> > diff --git a/include/dt-bindings/leds/common.h b/include/dt-bindings/leds/common.h
> > index e171d0a6beb2..ffcd46317307 100644
> > --- a/include/dt-bindings/leds/common.h
> > +++ b/include/dt-bindings/leds/common.h
> > @@ -19,4 +19,42 @@
> >   #define LEDS_BOOST_ADAPTIVE	1
> >   #define LEDS_BOOST_FIXED	2
> >   
> > +/* Standard LED functions */
> > +#define LED_FUNCTION_ACTIVITY "activity"
> > +#define LED_FUNCTION_ADSL "adsl"
> > +#define LED_FUNCTION_ALARM "alarm"
> > +#define LED_FUNCTION_BACKLIGHT "backlight"
> > +#define LED_FUNCTION_BLUETOOTH "bluetooth"
> > +#define LED_FUNCTION_BOOT "boot"
> > +#define LED_FUNCTION_CHRG "chrg"
>
> Why not spell out charge?

It was in one of existing dts files.
I have no issue with that, will change it to "charge".

> > +#define LED_FUNCTION_DEBUG "debug"
> > +#define LED_FUNCTION_DISK "disk"
> > +#define LED_FUNCTION_DISK_READ "disk-read"
> > +#define LED_FUNCTION_DISK_WRITE "disk-write"
> > +#define LED_FUNCTION_FAULT "fault"
> > +#define LED_FUNCTION_FLASH "flash"
> > +#define LED_FUNCTION_HDDERR "hdderr"
> > +#define LED_FUNCTION_HEARTBEAT "heartbeat"
> > +#define LED_FUNCTION_INDICATOR "indicator"
> > +#define LED_FUNCTION_INFO "info"
> > +#define LED_FUNCTION_INTERNET "internet"
>
> LEDs function can be for keyboards and keypads.
>
> Keypad for hand held devices
>
> #define LED_FUNCTION_KEYBOARD "keyboard"
> #define LED_FUNCTION_KEYPAD "keypad"

Ack.

> > +#define LED_FUNCTION_LAN "lan"
> > +#define LED_FUNCTION_MMC "mmc"
> > +#define LED_FUNCTION_NAND "nand"
> > +#define LED_FUNCTION_ON "on"
> > +#define LED_FUNCTION_PROGRAMMING "programming"
> > +#define LED_FUNCTION_PWR "pwr"
>
> Same comment as above on chrg

Ack.

> > +#define LED_FUNCTION_RX "rx"
> > +#define LED_FUNCTION_SD "sd"
> > +#define LED_FUNCTION_SLEEP "sleep"
> > +#define LED_FUNCTION_STANDBY "standby"
> > +#define LED_FUNCTION_STATUS "status"
> > +#define LED_FUNCTION_TORCH "torch"
> > +#define LED_FUNCTION_TV "tv"
> > +#define LED_FUNCTION_TX "tx"
> > +#define LED_FUNCTION_USB "usb"
> > +#define LED_FUNCTION_WAN "wan"
> > +#define LED_FUNCTION_WLAN "wlan"
> > +#define LED_FUNCTION_WPS "wps"
> > +
>
> Dan
>
> >   #endif /* __DT_BINDINGS_LEDS_H */

--
Best regards,
Jacek Anaszewski