[PATCH v2] PCI: qcom: Use default config space read function

[Marc Gonzalez]

We don't need to fudge the device class in qcom_pcie_rd_own_conf()
because dw_pcie_setup_rc() already does the right thing:

	/* Program correct class for RC */
	dw_pcie_wr_own_conf(pp, PCI_CLASS_DEVICE, 2, PCI_CLASS_BRIDGE_PCI);

Signed-off-by: Marc Gonzalez <marc.w.gonzalez@xxxxxxx>
---
Changes from v1 to v2: Completely drop qcom_pcie_rd_own_conf
Srinivas, could you test this patch on apq/ipq8064?
---
 drivers/pci/controller/dwc/pcie-qcom.c | 17 -----------------
 1 file changed, 17 deletions(-)

diff --git a/drivers/pci/controller/dwc/pcie-qcom.c b/drivers/pci/controller/dwc/pcie-qcom.c
index 3de5510fd3d5..d0c5c7616b3e 100644
--- a/drivers/pci/controller/dwc/pcie-qcom.c
+++ b/drivers/pci/controller/dwc/pcie-qcom.c
@@ -1131,25 +1131,8 @@ static int qcom_pcie_host_init(struct pcie_port *pp)
 	return ret;
 }
 
-static int qcom_pcie_rd_own_conf(struct pcie_port *pp, int where, int size,
-				 u32 *val)
-{
-	struct dw_pcie *pci = to_dw_pcie_from_pp(pp);
-
-	/* the device class is not reported correctly from the register */
-	if (where == PCI_CLASS_REVISION && size == 4) {
-		*val = readl(pci->dbi_base + PCI_CLASS_REVISION);
-		*val &= 0xff;	/* keep revision id */
-		*val |= PCI_CLASS_BRIDGE_PCI << 16;
-		return PCIBIOS_SUCCESSFUL;
-	}
-
-	return dw_pcie_read(pci->dbi_base + where, size, val);
-}
-
 static const struct dw_pcie_host_ops qcom_pcie_dw_ops = {
 	.host_init = qcom_pcie_host_init,
-	.rd_own_conf = qcom_pcie_rd_own_conf,
 };
 
 /* Qcom IP rev.: 2.1.0	Synopsys IP rev.: 4.01a */
-- 
2.17.1