[PATCH 2/2] pinctrl: meson: add support of drive-strength

From: Jerome Brunet
Date: Thu Mar 14 2019 - 12:37:47 EST

From: Guillaume La Roque <glaroque@xxxxxxxxxxxx>

drive-strength is a new feature needed for G12A SoC.
the default DS setting after boot is usually 0.5mA and it is not enough for
many functions. We need to be able to set the drive strength to reliably
enable things like MMC, I2C, etc ...

Signed-off-by: Guillaume La Roque <glaroque@xxxxxxxxxxxx>
Signed-off-by: Jerome Brunet <jbrunet@xxxxxxxxxxxx>
---
drivers/pinctrl/meson/pinctrl-meson-g12a.c | 36 ++---
drivers/pinctrl/meson/pinctrl-meson.c | 166 ++++++++++++++++-----
drivers/pinctrl/meson/pinctrl-meson.h | 20 ++-
3 files changed, 162 insertions(+), 60 deletions(-)

diff --git a/drivers/pinctrl/meson/pinctrl-meson-g12a.c b/drivers/pinctrl/meson/pinctrl-meson-g12a.c
index d494492e98e9..3475cd7bd2af 100644
--- a/drivers/pinctrl/meson/pinctrl-meson-g12a.c
+++ b/drivers/pinctrl/meson/pinctrl-meson-g12a.c
@@ -1304,28 +1304,28 @@ static struct meson_pmx_func meson_g12a_aobus_functions[] = {
};

static struct meson_bank meson_g12a_periphs_banks[] = {
- /* name first last irq pullen pull dir out in */
- BANK("Z", GPIOZ_0, GPIOZ_15, 12, 27,
- 4, 0, 4, 0, 12, 0, 13, 0, 14, 0),
- BANK("H", GPIOH_0, GPIOH_8, 28, 36,
- 3, 0, 3, 0, 9, 0, 10, 0, 11, 0),
- BANK("BOOT", BOOT_0, BOOT_15, 37, 52,
- 0, 0, 0, 0, 0, 0, 1, 0, 2, 0),
- BANK("C", GPIOC_0, GPIOC_7, 53, 60,
- 1, 0, 1, 0, 3, 0, 4, 0, 5, 0),
- BANK("A", GPIOA_0, GPIOA_15, 61, 76,
- 5, 0, 5, 0, 16, 0, 17, 0, 18, 0),
- BANK("X", GPIOX_0, GPIOX_19, 77, 96,
- 2, 0, 2, 0, 6, 0, 7, 0, 8, 0),
+ /* name first last irq pullen pull dir out in ds */
+ BANK_DS("Z", GPIOZ_0, GPIOZ_15, 12, 27,
+ 4, 0, 4, 0, 12, 0, 13, 0, 14, 0, 5, 0),
+ BANK_DS("H", GPIOH_0, GPIOH_8, 28, 36,
+ 3, 0, 3, 0, 9, 0, 10, 0, 11, 0, 4, 0),
+ BANK_DS("BOOT", BOOT_0, BOOT_15, 37, 52,
+ 0, 0, 0, 0, 0, 0, 1, 0, 2, 0, 0, 0),
+ BANK_DS("C", GPIOC_0, GPIOC_7, 53, 60,
+ 1, 0, 1, 0, 3, 0, 4, 0, 5, 0, 1, 0),
+ BANK_DS("A", GPIOA_0, GPIOA_15, 61, 76,
+ 5, 0, 5, 0, 16, 0, 17, 0, 18, 0, 6, 0),
+ BANK_DS("X", GPIOX_0, GPIOX_19, 77, 96,
+ 2, 0, 2, 0, 6, 0, 7, 0, 8, 0, 2, 0),
};

static struct meson_bank meson_g12a_aobus_banks[] = {
- /* name first last irq pullen pull dir out in */
- BANK("AO", GPIOAO_0, GPIOAO_11, 0, 11,
- 3, 0, 2, 0, 0, 0, 4, 0, 1, 0),
+ /* name first last irq pullen pull dir out in ds */
+ BANK_DS("AO", GPIOAO_0, GPIOAO_11, 0, 11, 3, 0, 2, 0, 0, 0, 4, 0, 1, 0,
+ 0, 0),
/* GPIOE actually located in the AO bank */
- BANK("E", GPIOE_0, GPIOE_2, 97, 99,
- 3, 16, 2, 16, 0, 16, 4, 16, 1, 16),
+ BANK_DS("E", GPIOE_0, GPIOE_2, 97, 99, 3, 16, 2, 16, 0, 16, 4, 16, 1,
+ 16, 1, 0),
};

static struct meson_pmx_bank meson_g12a_periphs_pmx_banks[] = {
diff --git a/drivers/pinctrl/meson/pinctrl-meson.c b/drivers/pinctrl/meson/pinctrl-meson.c
index 96a4a72708e4..786640f98f83 100644
--- a/drivers/pinctrl/meson/pinctrl-meson.c
+++ b/drivers/pinctrl/meson/pinctrl-meson.c
@@ -174,65 +174,108 @@ int meson_pmx_get_groups(struct pinctrl_dev *pcdev, unsigned selector,
return 0;
}

-static int meson_pinconf_set(struct pinctrl_dev *pcdev, unsigned int pin,
- unsigned long *configs, unsigned num_configs)
+static int meson_pinconf_set_bias(struct meson_pinctrl *pc, unsigned int pin,
+ enum pin_config_param conf)
+{
+ struct meson_bank *bank;
+ unsigned int reg, bit, val = 0;
+ int ret;
+
+ ret = meson_get_bank(pc, pin, &bank);
+ if (ret)
+ return ret;
+
+ meson_calc_reg_and_bit(bank, pin, REG_PULLEN, &reg, &bit);
+
+ if (conf == PIN_CONFIG_BIAS_DISABLE) {
+ ret = regmap_update_bits(pc->reg_pullen, reg, BIT(bit), 0);
+ if (ret)
+ return ret;
+ } else {
+ meson_calc_reg_and_bit(bank, pin, REG_PULL, &reg, &bit);
+ if (conf == PIN_CONFIG_BIAS_PULL_UP)
+ val = BIT(bit);
+
+ ret = regmap_update_bits(pc->reg_pull, reg, BIT(bit), val);
+ if (ret)
+ return ret;
+
+ meson_calc_reg_and_bit(bank, pin, REG_PULLEN, &reg, &bit);
+ ret = regmap_update_bits(pc->reg_pullen, reg, BIT(bit),
+ BIT(bit));
+ if (ret)
+ return ret;
+ }
+
+ return 0;
+}
+
+static int meson_pinconf_set_drive_strength(struct meson_pinctrl *pc,
+ unsigned int pin, u16 arg)
{
- struct meson_pinctrl *pc = pinctrl_dev_get_drvdata(pcdev);
struct meson_bank *bank;
- enum pin_config_param param;
unsigned int reg, bit;
- int i, ret;
+ unsigned int ds_val;
+ int ret;
+
+ if (!pc->reg_ds) {
+ dev_err(pc->dev, "drive-strength not supported\n");
+ return -ENOTSUPP;
+ }

ret = meson_get_bank(pc, pin, &bank);
if (ret)
return ret;

+ meson_calc_reg_and_bit(bank, pin, REG_DS, &reg, &bit);
+ bit = bit << 1;
+
+ if (arg <= 500) {
+ ds_val = MESON_PINCONF_DRV_500UA;
+ } else if (arg <= 2500) {
+ ds_val = MESON_PINCONF_DRV_2500UA;
+ } else if (arg <= 3000) {
+ ds_val = MESON_PINCONF_DRV_3000UA;
+ } else if (arg <= 4000) {
+ ds_val = MESON_PINCONF_DRV_4000UA;
+ } else {
+ dev_warn_once(pc->dev,
+ "pin %u: invalid drive-strength : %d , default to 4mA\n",
+ pin, arg);
+ ds_val = MESON_PINCONF_DRV_4000UA;
+ }
+
+ ret = regmap_update_bits(pc->reg_ds, reg, 0x3 << bit, ds_val << bit);
+ if (ret)
+ return ret;
+
+ return 0;
+}
+
+static int meson_pinconf_set(struct pinctrl_dev *pcdev, unsigned int pin,
+ unsigned long *configs, unsigned num_configs)
+{
+ struct meson_pinctrl *pc = pinctrl_dev_get_drvdata(pcdev);
+ enum pin_config_param param;
+ unsigned int arg;
+ int i, ret;
+
for (i = 0; i < num_configs; i++) {
param = pinconf_to_config_param(configs[i]);

switch (param) {
case PIN_CONFIG_BIAS_DISABLE:
- dev_dbg(pc->dev, "pin %u: disable bias\n", pin);
-
- meson_calc_reg_and_bit(bank, pin, REG_PULLEN, &reg,
- &bit);
- ret = regmap_update_bits(pc->reg_pullen, reg,
- BIT(bit), 0);
- if (ret)
- return ret;
- break;
case PIN_CONFIG_BIAS_PULL_UP:
- dev_dbg(pc->dev, "pin %u: enable pull-up\n", pin);
-
- meson_calc_reg_and_bit(bank, pin, REG_PULLEN,
- &reg, &bit);
- ret = regmap_update_bits(pc->reg_pullen, reg,
- BIT(bit), BIT(bit));
- if (ret)
- return ret;
-
- meson_calc_reg_and_bit(bank, pin, REG_PULL, &reg, &bit);
- ret = regmap_update_bits(pc->reg_pull, reg,
- BIT(bit), BIT(bit));
- if (ret)
- return ret;
- break;
case PIN_CONFIG_BIAS_PULL_DOWN:
- dev_dbg(pc->dev, "pin %u: enable pull-down\n", pin);
-
- meson_calc_reg_and_bit(bank, pin, REG_PULLEN,
- &reg, &bit);
- ret = regmap_update_bits(pc->reg_pullen, reg,
- BIT(bit), BIT(bit));
+ ret = meson_pinconf_set_bias(pc, pin, param);
if (ret)
return ret;
-
- meson_calc_reg_and_bit(bank, pin, REG_PULL, &reg, &bit);
- ret = regmap_update_bits(pc->reg_pull, reg,
- BIT(bit), 0);
+ break;
+ case PIN_CONFIG_DRIVE_STRENGTH:
+ arg = pinconf_to_config_argument(configs[i]);
+ ret = meson_pinconf_set_drive_strength(pc, pin, arg);
if (ret)
return ret;
- break;
default:
return -ENOTSUPP;
}
@@ -275,12 +318,51 @@ static int meson_pinconf_get_pull(struct meson_pinctrl *pc, unsigned int pin)
return conf;
}

+static int meson_pinconf_get_drive_strength(struct meson_pinctrl *pc,
+ unsigned int pin, u16 *arg)
+{
+ struct meson_bank *bank;
+ unsigned int reg, bit;
+ unsigned int val;
+ int ret;
+
+ ret = meson_get_bank(pc, pin, &bank);
+ if (ret)
+ return ret;
+
+ meson_calc_reg_and_bit(bank, pin, REG_DS, &reg, &bit);
+
+ ret = regmap_read(pc->reg_ds, reg, &val);
+ if (ret)
+ return ret;
+
+ switch ((val >> bit) & 0x3) {
+ case MESON_PINCONF_DRV_500UA:
+ *arg = 500;
+ break;
+ case MESON_PINCONF_DRV_2500UA:
+ *arg = 2500;
+ break;
+ case MESON_PINCONF_DRV_3000UA:
+ *arg = 3000;
+ break;
+ case MESON_PINCONF_DRV_4000UA:
+ *arg = 4000;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
static int meson_pinconf_get(struct pinctrl_dev *pcdev, unsigned int pin,
unsigned long *config)
{
struct meson_pinctrl *pc = pinctrl_dev_get_drvdata(pcdev);
enum pin_config_param param = pinconf_to_config_param(*config);
u16 arg;
+ int ret;

switch (param) {
case PIN_CONFIG_BIAS_DISABLE:
@@ -291,6 +373,10 @@ static int meson_pinconf_get(struct pinctrl_dev *pcdev, unsigned int pin,
else
return -EINVAL;
break;
+ case PIN_CONFIG_DRIVE_STRENGTH:
+ ret = meson_pinconf_get_drive_strength(pc, pin, &arg);
+ if (ret)
+ return ret;
default:
return -ENOTSUPP;
}
diff --git a/drivers/pinctrl/meson/pinctrl-meson.h b/drivers/pinctrl/meson/pinctrl-meson.h
index 5eaab925f427..1a88103dcb9b 100644
--- a/drivers/pinctrl/meson/pinctrl-meson.h
+++ b/drivers/pinctrl/meson/pinctrl-meson.h
@@ -71,9 +71,20 @@ enum meson_reg_type {
REG_DIR,
REG_OUT,
REG_IN,
+ REG_DS,
NUM_REG,
};

+/**
+ * enum meson_pinconf_drv - value of drive-strength supported
+ */
+enum meson_pinconf_drv {
+ MESON_PINCONF_DRV_500UA,
+ MESON_PINCONF_DRV_2500UA,
+ MESON_PINCONF_DRV_3000UA,
+ MESON_PINCONF_DRV_4000UA,
+};
+
/**
* struct meson bank
*
@@ -132,7 +143,8 @@ struct meson_pinctrl {
.num_groups = ARRAY_SIZE(fn ## _groups), \
}

-#define BANK(n, f, l, fi, li, per, peb, pr, pb, dr, db, or, ob, ir, ib) \
+#define BANK_DS(n, f, l, fi, li, per, peb, pr, pb, dr, db, or, ob, ir, ib, \
+ dsr, dsb) \
{ \
.name = n, \
.first = f, \
@@ -145,8 +157,12 @@ struct meson_pinctrl {
[REG_DIR] = { dr, db }, \
[REG_OUT] = { or, ob }, \
[REG_IN] = { ir, ib }, \
+ [REG_DS] = { dsr, dsb }, \
}, \
- }
+ }
+
+#define BANK(n, f, l, fi, li, per, peb, pr, pb, dr, db, or, ob, ir, ib) \
+ BANK_DS(n, f, l, fi, li, per, peb, pr, pb, dr, db, or, ob, ir, ib, 0, 0)

#define MESON_PIN(x) PINCTRL_PIN(x, #x)

--
2.20.1