[PATCH] net: ath: fix missing checks for bmi reads and writes

From: Kangjie Lu
Date: Fri Mar 15 2019 - 01:19:17 EST


ath10k_bmi_write32 and ath10k_bmi_read32 can fail. The fix
checks their statuses to avoid potential undefined behaviors.

Signed-off-by: Kangjie Lu <kjlu@xxxxxxx>
---
drivers/net/wireless/ath/ath10k/core.c | 40 ++++++++++++++++++++------
1 file changed, 31 insertions(+), 9 deletions(-)

diff --git a/drivers/net/wireless/ath/ath10k/core.c b/drivers/net/wireless/ath/ath10k/core.c
index 835b8de92d55..1bb586f0040e 100644
--- a/drivers/net/wireless/ath/ath10k/core.c
+++ b/drivers/net/wireless/ath/ath10k/core.c
@@ -629,13 +629,20 @@ static void ath10k_send_suspend_complete(struct ath10k *ar)
complete(&ar->target_suspend);
}

-static void ath10k_init_sdio(struct ath10k *ar)
+static int ath10k_init_sdio(struct ath10k *ar)
{
+ int ret;
u32 param = 0;

- ath10k_bmi_write32(ar, hi_mbox_io_block_sz, 256);
- ath10k_bmi_write32(ar, hi_mbox_isr_yield_limit, 99);
- ath10k_bmi_read32(ar, hi_acs_flags, &param);
+ ret = ath10k_bmi_write32(ar, hi_mbox_io_block_sz, 256);
+ if (ret)
+ return ret;
+ ret = ath10k_bmi_write32(ar, hi_mbox_isr_yield_limit, 99);
+ if (ret)
+ return ret;
+ ret = ath10k_bmi_read32(ar, hi_acs_flags, &param);
+ if (ret)
+ return ret;

/* Data transfer is not initiated, when reduced Tx completion
* is used for SDIO. disable it until fixed
@@ -647,14 +654,22 @@ static void ath10k_init_sdio(struct ath10k *ar)
*/
param &= ~HI_ACS_FLAGS_ALT_DATA_CREDIT_SIZE;
param |= HI_ACS_FLAGS_SDIO_SWAP_MAILBOX_SET;
- ath10k_bmi_write32(ar, hi_acs_flags, param);
+ ret = ath10k_bmi_write32(ar, hi_acs_flags, param);
+ if (ret)
+ return ret;

/* Explicitly set fwlog prints to zero as target may turn it on
* based on scratch registers.
*/
- ath10k_bmi_read32(ar, hi_option_flag, &param);
+ ret = ath10k_bmi_read32(ar, hi_option_flag, &param);
+ if (ret)
+ return ret;
param |= HI_OPTION_DISABLE_DBGLOG;
- ath10k_bmi_write32(ar, hi_option_flag, param);
+ ret = ath10k_bmi_write32(ar, hi_option_flag, param);
+ if (ret)
+ return ret;
+
+ return 0;
}

static int ath10k_init_configure_target(struct ath10k *ar)
@@ -2500,8 +2515,15 @@ int ath10k_core_start(struct ath10k *ar, enum ath10k_firmware_mode mode,
if (status)
goto err;

- if (ar->hif.bus == ATH10K_BUS_SDIO)
- ath10k_init_sdio(ar);
+ if (ar->hif.bus == ATH10K_BUS_SDIO) {
+ status = ath10k_init_sdio(ar);
+ if (status) {
+ ath10k_err(ar,
+ "could not init HTC (%d)\n",
+ status);
+ goto err;
+ }
+ }
}

ar->htc.htc_ops.target_send_suspend_complete =
--
2.17.1