RE: [PATCH V4 1/4] dt-bindings: fsl: scu: add general interrupt support

[Anson Huang]

Ping...

Best Regards!
Anson Huang

> -----Original Message-----
> From: Anson Huang [mailto:Anson.Huang@xxxxxxx]
> Sent: 2019年2月21日 17:19
> To: robh+dt@xxxxxxxxxx; mark.rutland@xxxxxxx; shawnguo@xxxxxxxxxx;
> s.hauer@xxxxxxxxxxxxxx; kernel@xxxxxxxxxxxxxx; festevam@xxxxxxxxx;
> a.zummo@xxxxxxxxxxxx; alexandre.belloni@xxxxxxxxxxx; Aisheng Dong
> <aisheng.dong@xxxxxxx>; ulf.hansson@xxxxxxxxxx; Daniel Baluta
> <daniel.baluta@xxxxxxx>; devicetree@xxxxxxxxxxxxxxx; linux-
> kernel@xxxxxxxxxxxxxxx; linux-arm-kernel@xxxxxxxxxxxxxxxxxxx; linux-
> rtc@xxxxxxxxxxxxxxx
> Cc: dl-linux-imx <linux-imx@xxxxxxx>
> Subject: [PATCH V4 1/4] dt-bindings: fsl: scu: add general interrupt support
> 
> Add scu general interrupt function support.
> 
> Signed-off-by: Anson Huang <Anson.Huang@xxxxxxx>
> Reviewed-by: Rob Herring <robh@xxxxxxxxxx>
> ---
> Changes since V3:
> 	- make general MU interrupt channel as optional;
> 	- rename "gi3" to "gip3" according to driver/dts change.
> ---
>  .../devicetree/bindings/arm/freescale/fsl,scu.txt      | 18 ++++++++++++------
>  1 file changed, 12 insertions(+), 6 deletions(-)
> 
> diff --git a/Documentation/devicetree/bindings/arm/freescale/fsl,scu.txt
> b/Documentation/devicetree/bindings/arm/freescale/fsl,scu.txt
> index 72d481c..4a9b9ab 100644
> --- a/Documentation/devicetree/bindings/arm/freescale/fsl,scu.txt
> +++ b/Documentation/devicetree/bindings/arm/freescale/fsl,scu.txt
> @@ -22,9 +22,11 @@ Required properties:
>  -------------------
>  - compatible:	should be "fsl,imx-scu".
>  - mbox-names:	should include "tx0", "tx1", "tx2", "tx3",
> -			       "rx0", "rx1", "rx2", "rx3".
> -- mboxes:	List of phandle of 4 MU channels for tx and 4 MU channels
> -		for rx. All 8 MU channels must be in the same MU instance.
> +			       "rx0", "rx1", "rx2", "rx3";
> +		include "gip3" if want to support general MU interrupt.
> +- mboxes:	List of phandle of 4 MU channels for tx, 4 MU channels for
> +		rx, and 1 optional MU channel for general interrupt.
> +		All MU channels must be in the same MU instance.
>  		Cross instances are not allowed. The MU instance can only
>  		be one of LSIO MU0~M4 for imx8qxp and imx8qm. Users
> need
>  		to make sure use the one which is not conflict with other @@
> -34,6 +36,7 @@ Required properties:
>  		Channel 1 must be "tx1" or "rx1".
>  		Channel 2 must be "tx2" or "rx2".
>  		Channel 3 must be "tx3" or "rx3".
> +		General interrupt rx channel must be "gip3".
>  		e.g.
>  		mboxes = <&lsio_mu1 0 0
>  			  &lsio_mu1 0 1
> @@ -42,7 +45,8 @@ Required properties:
>  			  &lsio_mu1 1 0
>  			  &lsio_mu1 1 1
>  			  &lsio_mu1 1 2
> -			  &lsio_mu1 1 3>;
> +			  &lsio_mu1 1 3
> +			  &lsio_mu1 3 3>;
>  		See Documentation/devicetree/bindings/mailbox/fsl,mu.txt
>  		for detailed mailbox binding.
> 
> @@ -133,7 +137,8 @@ firmware {
>  	scu {
>  		compatible = "fsl,imx-scu";
>  		mbox-names = "tx0", "tx1", "tx2", "tx3",
> -			     "rx0", "rx1", "rx2", "rx3";
> +			     "rx0", "rx1", "rx2", "rx3",
> +			     "gip3";
>  		mboxes = <&lsio_mu1 0 0
>  			  &lsio_mu1 0 1
>  			  &lsio_mu1 0 2
> @@ -141,7 +146,8 @@ firmware {
>  			  &lsio_mu1 1 0
>  			  &lsio_mu1 1 1
>  			  &lsio_mu1 1 2
> -			  &lsio_mu1 1 3>;
> +			  &lsio_mu1 1 3
> +			  &lsio_mu1 3 3>;
> 
>  		clk: clk {
>  			compatible = "fsl,imx8qxp-clk", "fsl,scu-clk";
> --
> 2.7.4