Re: [PATCH v2 45/45] drivers: tty: serial: mux: use devm_* functions

[Andy Shevchenko]

On Fri, Mar 15, 2019 at 12:37 AM Enrico Weigelt, metux IT consult
<info@xxxxxxxxx> wrote:
>
> Use the safer devm versions of memory mapping functions.

If you are going to use devm_*_free(), what's the point to have this
change from the beginning?

P.S. Disregard that this is untested series...

> --- a/drivers/tty/serial/mux.c
> +++ b/drivers/tty/serial/mux.c
> @@ -456,8 +456,9 @@ static int __init mux_probe(struct parisc_device *dev)
>         printk(KERN_INFO "Serial mux driver (%d ports) Revision: 0.6\n", port_count);
>
>         dev_set_drvdata(&dev->dev, (void *)(long)port_count);
> -       request_mem_region(dev->hpa.start + MUX_OFFSET,
> -                           port_count * MUX_LINE_OFFSET, "Mux");

> +       devm_request_mem_region(&dev->dev,
> +                               dev->hpa.start + MUX_OFFSET,
> +                               port_count * MUX_LINE_OFFSET, "Mux");

...and on top of this where is error checking?

>
>         if(!port_cnt) {
>                 mux_driver.cons = MUX_CONSOLE;
> @@ -474,7 +475,9 @@ static int __init mux_probe(struct parisc_device *dev)
>                 port->iobase    = 0;
>                 port->mapbase   = dev->hpa.start + MUX_OFFSET +
>                                                 (i * MUX_LINE_OFFSET);
> -               port->membase   = ioremap_nocache(port->mapbase, MUX_LINE_OFFSET);
> +               port->membase   = devm_ioremap_nocache(port->dev,
> +                                                      port->mapbase,
> +                                                      MUX_LINE_OFFSET);
>                 port->iotype    = UPIO_MEM;
>                 port->type      = PORT_MUX;
>                 port->irq       = 0;
> @@ -517,10 +520,12 @@ static int __exit mux_remove(struct parisc_device *dev)
>
>                 uart_remove_one_port(&mux_driver, port);
>                 if(port->membase)
> -                       iounmap(port->membase);
> +                       devm_iounmap(port->dev, port->membase);
>         }
>
> -       release_mem_region(dev->hpa.start + MUX_OFFSET, port_count * MUX_LINE_OFFSET);
> +       devm_release_mem_region(&dev->dev,
> +                               dev->hpa.start + MUX_OFFSET,
> +                               port_count * MUX_LINE_OFFSET);
>         return 0;
>  }


-- 
With Best Regards,
Andy Shevchenko