Re: [PATCH 4/6] dt-bindings: display: bridge: Add ICN6211 MIPI-DSI to RGB convertor bridge

From: Maxime Ripard
Date: Fri Mar 15 2019 - 09:34:23 EST


On Fri, Mar 15, 2019 at 06:38:23PM +0530, Jagan Teki wrote:
> ICN6211 is MIPI-DSI/RGB converter bridge from chipone.
> It has a flexible configuration of MIPI DSI signal input
> and produce RGB565, RGB666, RGB888 output format.
>
> Add dt-bingings for it.
>
> Signed-off-by: Jagan Teki <jagan@xxxxxxxxxxxxxxxxxxxx>
> ---
> .../display/bridge/chipone,icn6211.txt | 36 +++++++++++++++++++
> 1 file changed, 36 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/display/bridge/chipone,icn6211.txt
>
> diff --git a/Documentation/devicetree/bindings/display/bridge/chipone,icn6211.txt b/Documentation/devicetree/bindings/display/bridge/chipone,icn6211.txt
> new file mode 100644
> index 000000000000..7f13efd7ee7f
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/display/bridge/chipone,icn6211.txt
> @@ -0,0 +1,36 @@
> +Chipone ICN6211 MIPI-DSI to RGB Convertor Bridge
> +
> +ICN6211 is MIPI-DSI/RGB converter bridge from chipone.
> +It has a flexible configuration of MIPI DSI signal input
> +and produce RGB565, RGB666, RGB888 output format.
> +
> +Required properties for RGB:
> +- compatible: must be "chipone,icn6211" and one of:
> + * "bananapi,icn6211"

Why is that compatible needed?

> +- reg: the virtual channel number of a DSI peripheral
> +- reset-gpios: a GPIO phandle for the reset pin
> +
> +The device node can contain following 'port' child nodes,
> +according to the OF graph bindings defined in [1]:
> + 0: DSI Input, not required, if the bridge is DSI controlled
> + 1: RGB Output, mandatory

Your example doesn't have that input port

Maxime

--
Maxime Ripard, Bootlin
Embedded Linux and Kernel engineering
https://bootlin.com

Attachment: signature.asc
Description: PGP signature