[RESEND PATCH v6 07/12] x86/fsgsbase/64: Introduce the FIND_PERCPU_BASE macro
From: Chang S. Bae
Date: Fri Mar 15 2019 - 16:07:15 EST
GSBASE is used to find per-CPU data in the kernel. But when it is unknown,
the per-CPU base can be found from the per_cpu_offset table with a CPU NR.
The CPU NR is extracted from the limit field of the CPUNODE entry in GDT,
or by the RDPID instruction.
Also, add the GAS-compatible RDPID macro.
The new macro will be used on a following patch.
Suggested-by: H. Peter Anvin <hpa@xxxxxxxxx>
Signed-off-by: Chang S. Bae <chang.seok.bae@xxxxxxxxx>
Cc: Andy Lutomirski <luto@xxxxxxxxxx>
Cc: Thomas Gleixner <tglx@xxxxxxxxxxxxx>
Cc: Ingo Molnar <mingo@xxxxxxxxxx>
Cc: Dave Hansen <dave.hansen@xxxxxxxxxxxxxxx>
Cc: Andi Kleen <ak@xxxxxxxxxxxxxxx>
---
arch/x86/include/asm/fsgsbase.h | 41 +++++++++++++++++++++++++++++++++
arch/x86/include/asm/inst.h | 15 ++++++++++++
2 files changed, 56 insertions(+)
diff --git a/arch/x86/include/asm/fsgsbase.h b/arch/x86/include/asm/fsgsbase.h
index aefd53767a5d..5e3dfbe8c1bf 100644
--- a/arch/x86/include/asm/fsgsbase.h
+++ b/arch/x86/include/asm/fsgsbase.h
@@ -78,6 +78,47 @@ extern void x86_gsbase_write_cpu_inactive(unsigned long gsbase);
#endif /* CONFIG_X86_64 */
+#else /* __ASSEMBLY__ */
+
+#ifdef CONFIG_X86_64
+
+#include <asm/inst.h>
+
+#ifdef CONFIG_SMP
+
+/*
+ * CPU/node NR is loaded from the limit (size) field of a special segment
+ * descriptor entry in GDT.
+ */
+.macro LOAD_CPU_AND_NODE_SEG_LIMIT reg:req
+ movq $__CPUNODE_SEG, \reg
+ lsl \reg, \reg
+.endm
+
+/*
+ * Fetch the per-CPU GSBASE value for this processor and put it in @reg.
+ * We normally use %gs for accessing per-CPU data, but we are setting up
+ * %gs here and obviously can not use %gs itself to access per-CPU data.
+ */
+.macro FIND_PERCPU_BASE reg:req
+ ALTERNATIVE \
+ "LOAD_CPU_AND_NODE_SEG_LIMIT \reg", \
+ "RDPID \reg", \
+ X86_FEATURE_RDPID
+ andq $VDSO_CPUNODE_MASK, \reg
+ movq __per_cpu_offset(, \reg, 8), \reg
+.endm
+
+#else
+
+.macro FIND_PERCPU_BASE reg:req
+ movq pcpu_unit_offsets(%rip), \reg
+.endm
+
+#endif /* CONFIG_SMP */
+
+#endif /* CONFIG_X86_64 */
+
#endif /* __ASSEMBLY__ */
#endif /* _ASM_FSGSBASE_H */
diff --git a/arch/x86/include/asm/inst.h b/arch/x86/include/asm/inst.h
index f5a796da07f8..d063841a17e3 100644
--- a/arch/x86/include/asm/inst.h
+++ b/arch/x86/include/asm/inst.h
@@ -306,6 +306,21 @@
.endif
MODRM 0xc0 movq_r64_xmm_opd1 movq_r64_xmm_opd2
.endm
+
+.macro RDPID opd
+ REG_TYPE rdpid_opd_type \opd
+ .if rdpid_opd_type == REG_TYPE_R64
+ R64_NUM rdpid_opd \opd
+ .else
+ R32_NUM rdpid_opd \opd
+ .endif
+ .byte 0xf3
+ .if rdpid_opd > 7
+ PFX_REX rdpid_opd 0
+ .endif
+ .byte 0x0f, 0xc7
+ MODRM 0xc0 rdpid_opd 0x7
+.endm
#endif
#endif
--
2.19.1