[PATCH v2 1/5] iio: light: vcnl4000 use word writes instead of byte writes

[Angus Ainslie (Purism)]

The VCNL4200 datasheet says that word read and writes should be used
to access the registers.

Signed-off-by: Angus Ainslie (Purism) <angus@xxxxxxxx>
---
 drivers/iio/light/vcnl4000.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/iio/light/vcnl4000.c b/drivers/iio/light/vcnl4000.c
index 04fd0d4b6f19..5295330b65e2 100644
--- a/drivers/iio/light/vcnl4000.c
+++ b/drivers/iio/light/vcnl4000.c
@@ -140,10 +140,10 @@ static int vcnl4200_init(struct vcnl4000_data *data)
 	data->rev = (ret >> 8) & 0xf;
 
 	/* Set defaults and enable both channels */
-	ret = i2c_smbus_write_byte_data(data->client, VCNL4200_AL_CONF, 0x00);
+	ret = i2c_smbus_write_word_data(data->client, VCNL4200_AL_CONF, 0x00);
 	if (ret < 0)
 		return ret;
-	ret = i2c_smbus_write_byte_data(data->client, VCNL4200_PS_CONF1, 0x00);
+	ret = i2c_smbus_write_word_data(data->client, VCNL4200_PS_CONF1, 0x00);
 	if (ret < 0)
 		return ret;
 
-- 
2.17.1