[PATCH RESEND V6 2/5] pwm: Add i.MX TPM PWM driver support
From: Anson Huang
Date: Tue Mar 19 2019 - 03:10:17 EST
i.MX7ULP has TPM(Low Power Timer/Pulse Width Modulation Module)
inside, it can support multiple PWM channels, all the channels
share same counter and period setting, but each channel can
configure its duty and polarity independently.
There are several TPM modules in i.MX7ULP, the number of channels
in TPM modules are different, it can be read from each TPM module's
PARAM register.
Signed-off-by: Anson Huang <Anson.Huang@xxxxxxx>
---
Changes since V5:
- improve commit message body;
- add period round function;
- use per channel data for saving channel's private data;
- improve error message output during probe;
- improve different period settings by different channels' handling;
- support #pwm-cells 3 cases.
---
drivers/pwm/Kconfig | 11 ++
drivers/pwm/Makefile | 1 +
drivers/pwm/pwm-imx-tpm.c | 463 ++++++++++++++++++++++++++++++++++++++++++++++
3 files changed, 475 insertions(+)
create mode 100644 drivers/pwm/pwm-imx-tpm.c
diff --git a/drivers/pwm/Kconfig b/drivers/pwm/Kconfig
index 54f8238..3ea0391 100644
--- a/drivers/pwm/Kconfig
+++ b/drivers/pwm/Kconfig
@@ -210,6 +210,17 @@ config PWM_IMX27
To compile this driver as a module, choose M here: the module
will be called pwm-imx27.
+config PWM_IMX_TPM
+ tristate "i.MX TPM PWM support"
+ depends on ARCH_MXC || COMPILE_TEST
+ depends on HAVE_CLK && HAS_IOMEM
+ help
+ Generic PWM framework driver for i.MX7ULP TPM module, TPM's full
+ name is Low Power Timer/Pulse Width Modulation Module.
+
+ To compile this driver as a module, choose M here: the module
+ will be called pwm-imx-tpm.
+
config PWM_JZ4740
tristate "Ingenic JZ47xx PWM support"
depends on MACH_INGENIC
diff --git a/drivers/pwm/Makefile b/drivers/pwm/Makefile
index 448825e..c368599 100644
--- a/drivers/pwm/Makefile
+++ b/drivers/pwm/Makefile
@@ -19,6 +19,7 @@ obj-$(CONFIG_PWM_HIBVT) += pwm-hibvt.o
obj-$(CONFIG_PWM_IMG) += pwm-img.o
obj-$(CONFIG_PWM_IMX1) += pwm-imx1.o
obj-$(CONFIG_PWM_IMX27) += pwm-imx27.o
+obj-$(CONFIG_PWM_IMX_TPM) += pwm-imx-tpm.o
obj-$(CONFIG_PWM_JZ4740) += pwm-jz4740.o
obj-$(CONFIG_PWM_LP3943) += pwm-lp3943.o
obj-$(CONFIG_PWM_LPC18XX_SCT) += pwm-lpc18xx-sct.o
diff --git a/drivers/pwm/pwm-imx-tpm.c b/drivers/pwm/pwm-imx-tpm.c
new file mode 100644
index 0000000..bb6b27e
--- /dev/null
+++ b/drivers/pwm/pwm-imx-tpm.c
@@ -0,0 +1,463 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright 2018-2019 NXP.
+ *
+ * Limitations:
+ * - The TPM counter and period counter are shared between
+ * multiple channels, so all channels should use same period
+ * settings.
+ */
+
+#include <linux/bitfield.h>
+#include <linux/bitops.h>
+#include <linux/clk.h>
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/log2.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/platform_device.h>
+#include <linux/pwm.h>
+#include <linux/slab.h>
+
+#define PWM_IMX_TPM_PARAM 0x4
+#define PWM_IMX_TPM_GLOBAL 0x8
+#define PWM_IMX_TPM_SC 0x10
+#define PWM_IMX_TPM_CNT 0x14
+#define PWM_IMX_TPM_MOD 0x18
+#define PWM_IMX_TPM_CnSC(n) (0x20 + (n) * 0x8)
+#define PWM_IMX_TPM_CnV(n) (0x24 + (n) * 0x8)
+
+#define PWM_IMX_TPM_PARAM_CHAN GENMASK(7, 0)
+
+#define PWM_IMX_TPM_SC_PS GENMASK(2, 0)
+#define PWM_IMX_TPM_SC_CMOD GENMASK(4, 3)
+#define PWM_IMX_TPM_SC_CMOD_INC_EVERY_CLK BIT(3)
+#define PWM_IMX_TPM_SC_CPWMS BIT(5)
+
+#define PWM_IMX_TPM_CnSC_CHF BIT(7)
+#define PWM_IMX_TPM_CnSC_MSB BIT(5)
+#define PWM_IMX_TPM_CnSC_MSA BIT(4)
+#define PWM_IMX_TPM_CnSC_ELS GENMASK(3, 2) /* combine ELSA and ELSB as a field */
+
+#define PWM_IMX_TPM_MOD_MOD GENMASK(15, 0)
+
+#define PWM_IMX_TPM_MAX_COUNT 0xffff
+
+struct imx_tpm_pwm_chip {
+ struct pwm_chip chip;
+ struct clk *clk;
+ void __iomem *base;
+ struct mutex lock;
+ u32 user_count;
+ u32 enable_count;
+ u32 real_period;
+};
+
+struct imx_tpm_pwm_channel {
+ u32 config;
+ bool status;
+};
+
+static inline struct imx_tpm_pwm_chip *to_imx_tpm_pwm_chip(struct pwm_chip *chip)
+{
+ return container_of(chip, struct imx_tpm_pwm_chip, chip);
+}
+
+static unsigned int pwm_imx_tpm_round_period(struct pwm_chip *chip,
+ u32 period)
+{
+ struct imx_tpm_pwm_chip *tpm = to_imx_tpm_pwm_chip(chip);
+ u32 rate, real_period, prescale, period_count;
+ u64 tmp;
+
+ rate = clk_get_rate(tpm->clk);
+ tmp = period;
+ tmp *= rate;
+ tmp = DIV_ROUND_CLOSEST_ULL(tmp, NSEC_PER_SEC);
+ if (tmp <= PWM_IMX_TPM_MAX_COUNT) {
+ prescale = 0;
+ } else {
+ prescale = roundup_pow_of_two(tmp /
+ (PWM_IMX_TPM_MAX_COUNT + 1));
+ prescale = ilog2(prescale);
+ }
+
+ /* if no valid prescale found, use MAX instead */
+ if ((!FIELD_FIT(PWM_IMX_TPM_SC_PS, prescale)))
+ prescale = PWM_IMX_TPM_SC_PS >> __bf_shf(PWM_IMX_TPM_SC_PS);
+
+ /* if no valid period count found, use MAX instead */
+ period_count = (tmp + ((1 << prescale) >> 1)) >> prescale;
+ if (period_count > PWM_IMX_TPM_MOD_MOD)
+ period_count = PWM_IMX_TPM_MOD_MOD;
+
+ /* calculate real period HW can support */
+ tmp = period_count;
+ tmp *= (1 << prescale) * NSEC_PER_SEC;
+ real_period = DIV_ROUND_CLOSEST_ULL(tmp, rate);
+
+ return real_period;
+}
+
+static void pwm_imx_tpm_config_counter(struct pwm_chip *chip, u32 period)
+{
+ struct imx_tpm_pwm_chip *tpm = to_imx_tpm_pwm_chip(chip);
+ u32 val, rate, prescale, saved_cmod;
+ u64 tmp;
+
+ rate = clk_get_rate(tpm->clk);
+ tmp = period;
+ tmp *= rate;
+ tmp = DIV_ROUND_CLOSEST_ULL(tmp, NSEC_PER_SEC);
+ if (tmp <= PWM_IMX_TPM_MAX_COUNT) {
+ prescale = 0;
+ } else {
+ prescale = roundup_pow_of_two(tmp /
+ (PWM_IMX_TPM_MAX_COUNT + 1));
+ prescale = ilog2(prescale);
+ }
+
+ /* make sure counter is disabled for programming prescale */
+ val = readl(tpm->base + PWM_IMX_TPM_SC);
+ saved_cmod = FIELD_GET(PWM_IMX_TPM_SC_CMOD, val);
+ if (saved_cmod) {
+ val &= ~PWM_IMX_TPM_SC_CMOD;
+ writel(val, tpm->base + PWM_IMX_TPM_SC);
+ }
+
+ /* set TPM counter prescale */
+ val = readl(tpm->base + PWM_IMX_TPM_SC);
+ val &= ~PWM_IMX_TPM_SC_PS;
+ val |= FIELD_PREP(PWM_IMX_TPM_SC_PS, prescale);
+ writel(val, tpm->base + PWM_IMX_TPM_SC);
+
+ /*
+ * set period count: according to RM, the MOD register is
+ * updated immediately after CMOD[1:0] = 2b'00 above
+ */
+ val = (tmp + ((1 << prescale) >> 1)) >> prescale;
+ writel(val, tpm->base + PWM_IMX_TPM_MOD);
+
+ /* restore the clock mode if necessary */
+ if (saved_cmod) {
+ val = readl(tpm->base + PWM_IMX_TPM_SC);
+ val |= FIELD_PREP(PWM_IMX_TPM_SC_CMOD, saved_cmod);
+ writel(val, tpm->base + PWM_IMX_TPM_SC);
+ }
+
+ tpm->real_period = period;
+}
+
+static void pwm_imx_tpm_config(struct pwm_chip *chip,
+ struct pwm_device *pwm,
+ u32 period,
+ u32 duty_cycle,
+ enum pwm_polarity polarity)
+{
+ struct imx_tpm_pwm_chip *tpm = to_imx_tpm_pwm_chip(chip);
+ struct imx_tpm_pwm_channel *chan = pwm_get_chip_data(pwm);
+ u32 val;
+ u64 tmp;
+
+ /* set duty counter */
+ tmp = readl(tpm->base + PWM_IMX_TPM_MOD) & PWM_IMX_TPM_MOD_MOD;
+ tmp *= duty_cycle;
+ val = DIV_ROUND_CLOSEST_ULL(tmp, period);
+ writel(val, tpm->base + PWM_IMX_TPM_CnV(pwm->hwpwm));
+
+ /*
+ * set polarity (for edge-aligned PWM modes)
+ *
+ * ELS[1:0] = 2b10 yields normal polarity behaviour,
+ * ELS[1:0] = 2b01 yields inversed polarity.
+ * The other values are reserved.
+ */
+ val = readl(tpm->base + PWM_IMX_TPM_CnSC(pwm->hwpwm));
+ val &= ~(PWM_IMX_TPM_CnSC_ELS | PWM_IMX_TPM_CnSC_MSA);
+ val |= PWM_IMX_TPM_CnSC_MSB;
+ val |= (polarity == PWM_POLARITY_NORMAL) ?
+ FIELD_PREP(PWM_IMX_TPM_CnSC_ELS, 0x2) :
+ FIELD_PREP(PWM_IMX_TPM_CnSC_ELS, 0x1);
+ /*
+ * polarity settings will enabled/disable output status
+ * immediately, so here ONLY save the config and write
+ * it into register when channel is enabled/disabled.
+ */
+ chan->config = val;
+}
+
+/*
+ * When a channel's polarity is configured, the polarity settings
+ * will be saved and ONLY write into the register when the channel
+ * is enabled.
+ *
+ * When a channel is disabled, its polarity settings will be saved
+ * and its output will be disabled by clearing polarity settings.
+ *
+ * When a channel is enabled, its polarity settings will be restored
+ * and output will be enabled again.
+ */
+static void pwm_imx_tpm_enable(struct pwm_chip *chip,
+ struct pwm_device *pwm,
+ bool enable)
+{
+ struct imx_tpm_pwm_chip *tpm = to_imx_tpm_pwm_chip(chip);
+ struct imx_tpm_pwm_channel *chan = pwm_get_chip_data(pwm);
+ u32 val;
+
+ val = readl(tpm->base + PWM_IMX_TPM_SC);
+ if (enable) {
+ /* restore channel config */
+ writel(chan->config,
+ tpm->base + PWM_IMX_TPM_CnSC(pwm->hwpwm));
+
+ if (++tpm->enable_count == 1) {
+ /* start TPM counter */
+ val |= PWM_IMX_TPM_SC_CMOD_INC_EVERY_CLK;
+ writel(val, tpm->base + PWM_IMX_TPM_SC);
+ }
+ } else {
+ /* disable channel */
+ val = readl(tpm->base + PWM_IMX_TPM_CnSC(pwm->hwpwm));
+ val &= ~(PWM_IMX_TPM_CnSC_MSA | PWM_IMX_TPM_CnSC_MSB |
+ PWM_IMX_TPM_CnSC_ELS);
+ writel(val, tpm->base + PWM_IMX_TPM_CnSC(pwm->hwpwm));
+
+ if (--tpm->enable_count == 0) {
+ /* stop TPM counter since all channels are disabled */
+ val &= ~PWM_IMX_TPM_SC_CMOD;
+ writel(val, tpm->base + PWM_IMX_TPM_SC);
+ }
+ }
+
+ /* update channel status */
+ chan->status = enable;
+}
+
+static void pwm_imx_tpm_get_state(struct pwm_chip *chip,
+ struct pwm_device *pwm,
+ struct pwm_state *state)
+{
+ struct imx_tpm_pwm_chip *tpm = to_imx_tpm_pwm_chip(chip);
+ u32 rate, val;
+ u64 tmp;
+
+ /* get period */
+ state->period = tpm->real_period;
+
+ /* get duty cycle */
+ rate = clk_get_rate(tpm->clk);
+ val = readl(tpm->base + PWM_IMX_TPM_SC);
+ val = FIELD_GET(PWM_IMX_TPM_SC_PS, val);
+ tmp = readl(tpm->base + PWM_IMX_TPM_CnV(pwm->hwpwm));
+ tmp *= (1 << val) * NSEC_PER_SEC;
+ state->duty_cycle = DIV_ROUND_CLOSEST_ULL(tmp, rate);
+
+ /* get polarity */
+ val = readl(tpm->base + PWM_IMX_TPM_CnSC(pwm->hwpwm));
+ if (FIELD_GET(PWM_IMX_TPM_CnSC_ELS, val) == 0x1)
+ state->polarity = PWM_POLARITY_INVERSED;
+ else if (FIELD_GET(PWM_IMX_TPM_CnSC_ELS, val) == 0x2)
+ state->polarity = PWM_POLARITY_NORMAL;
+
+ /* get channel status */
+ state->enabled = FIELD_GET(PWM_IMX_TPM_CnSC_ELS, val) ? true : false;
+}
+
+static int pwm_imx_tpm_apply(struct pwm_chip *chip, struct pwm_device *pwm,
+ struct pwm_state *state)
+{
+ struct imx_tpm_pwm_chip *tpm = to_imx_tpm_pwm_chip(chip);
+ struct imx_tpm_pwm_channel *chan = pwm_get_chip_data(pwm);
+ u32 p;
+
+ mutex_lock(&tpm->lock);
+
+ if (state->period != tpm->real_period) {
+ /*
+ * TPM counter is shared by multiple channels, so
+ * prescale and period can NOT be modified when
+ * there are multiple channels in use with different
+ * period settings.
+ */
+ p = pwm_imx_tpm_round_period(chip, state->period);
+ if (p != tpm->real_period && tpm->user_count != 1)
+ return -EBUSY;
+ else if (p != tpm->real_period)
+ pwm_imx_tpm_config_counter(chip, p);
+ }
+
+ if (state->enabled == false) {
+ /*
+ * if eventually the PWM output is LOW, either
+ * duty cycle is 0 or status is disabled, need
+ * to make sure the output pin is LOW.
+ */
+ pwm_imx_tpm_config(chip, pwm, state->period,
+ 0, state->polarity);
+ if (chan->status == true)
+ pwm_imx_tpm_enable(chip, pwm, false);
+ } else {
+ pwm_imx_tpm_config(chip, pwm, state->period,
+ state->duty_cycle, state->polarity);
+ if (chan->status == false)
+ pwm_imx_tpm_enable(chip, pwm, true);
+ }
+
+ mutex_unlock(&tpm->lock);
+
+ return 0;
+}
+
+static int pwm_imx_tpm_request(struct pwm_chip *chip, struct pwm_device *pwm)
+{
+ struct imx_tpm_pwm_chip *tpm = to_imx_tpm_pwm_chip(chip);
+ struct imx_tpm_pwm_channel *chan;
+
+ chan = devm_kzalloc(chip->dev, sizeof(*chan), GFP_KERNEL);
+ if (!chan)
+ return -ENOMEM;
+
+ pwm_set_chip_data(pwm, chan);
+
+ mutex_lock(&tpm->lock);
+ tpm->user_count++;
+ mutex_unlock(&tpm->lock);
+
+ return 0;
+}
+
+static void pwm_imx_tpm_free(struct pwm_chip *chip, struct pwm_device *pwm)
+{
+ struct imx_tpm_pwm_chip *tpm = to_imx_tpm_pwm_chip(chip);
+
+ mutex_lock(&tpm->lock);
+ tpm->user_count--;
+ mutex_unlock(&tpm->lock);
+
+ devm_kfree(chip->dev, pwm_get_chip_data(pwm));
+ pwm_set_chip_data(pwm, NULL);
+}
+
+static const struct pwm_ops imx_tpm_pwm_ops = {
+ .request = pwm_imx_tpm_request,
+ .free = pwm_imx_tpm_free,
+ .get_state = pwm_imx_tpm_get_state,
+ .apply = pwm_imx_tpm_apply,
+ .owner = THIS_MODULE,
+};
+
+static int pwm_imx_tpm_probe(struct platform_device *pdev)
+{
+ struct imx_tpm_pwm_chip *tpm;
+ int ret;
+ u32 val;
+
+ tpm = devm_kzalloc(&pdev->dev, sizeof(*tpm), GFP_KERNEL);
+ if (!tpm)
+ return -ENOMEM;
+
+ platform_set_drvdata(pdev, tpm);
+
+ tpm->base = devm_platform_ioremap_resource(pdev, 0);
+ if (IS_ERR(tpm->base))
+ return PTR_ERR(tpm->base);
+
+ tpm->clk = devm_clk_get(&pdev->dev, NULL);
+ if (IS_ERR(tpm->clk)) {
+ ret = PTR_ERR(tpm->clk);
+ if (ret != -EPROBE_DEFER)
+ dev_err(&pdev->dev,
+ "failed to get PWM clock: %d\n", ret);
+ return ret;
+ }
+
+ ret = clk_prepare_enable(tpm->clk);
+ if (ret) {
+ dev_err(&pdev->dev,
+ "failed to prepare or enable clock: %d\n", ret);
+ return ret;
+ }
+
+ tpm->chip.dev = &pdev->dev;
+ tpm->chip.ops = &imx_tpm_pwm_ops;
+ tpm->chip.base = -1;
+ tpm->chip.of_xlate = of_pwm_xlate_with_flags;
+ tpm->chip.of_pwm_n_cells = 3;
+
+ /* get number of channels */
+ val = readl(tpm->base + PWM_IMX_TPM_PARAM);
+ tpm->chip.npwm = FIELD_GET(PWM_IMX_TPM_PARAM_CHAN, val);
+
+ mutex_init(&tpm->lock);
+
+ ret = pwmchip_add(&tpm->chip);
+ if (ret) {
+ dev_err(&pdev->dev, "failed to add PWM chip: %d\n", ret);
+ clk_disable_unprepare(tpm->clk);
+ }
+
+ return ret;
+}
+
+static int pwm_imx_tpm_remove(struct platform_device *pdev)
+{
+ struct imx_tpm_pwm_chip *tpm = platform_get_drvdata(pdev);
+ int ret = pwmchip_remove(&tpm->chip);
+
+ clk_disable_unprepare(tpm->clk);
+
+ return ret;
+}
+
+static int __maybe_unused pwm_imx_tpm_suspend(struct device *dev)
+{
+ struct imx_tpm_pwm_chip *tpm = dev_get_drvdata(dev);
+
+ if (tpm->enable_count == 0)
+ clk_disable_unprepare(tpm->clk);
+
+ return 0;
+}
+
+static int __maybe_unused pwm_imx_tpm_resume(struct device *dev)
+{
+ struct imx_tpm_pwm_chip *tpm = dev_get_drvdata(dev);
+ int ret = 0;
+
+ if (tpm->enable_count == 0) {
+ ret = clk_prepare_enable(tpm->clk);
+ if (ret)
+ dev_err(dev,
+ "failed to prepare or enable clock: %d\n",
+ ret);
+ }
+
+ return ret;
+}
+
+static SIMPLE_DEV_PM_OPS(imx_tpm_pwm_pm,
+ pwm_imx_tpm_suspend, pwm_imx_tpm_resume);
+
+static const struct of_device_id imx_tpm_pwm_dt_ids[] = {
+ { .compatible = "fsl,imx-tpm", },
+ { /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, imx_tpm_pwm_dt_ids);
+
+static struct platform_driver imx_tpm_pwm_driver = {
+ .driver = {
+ .name = "imx-tpm-pwm",
+ .of_match_table = imx_tpm_pwm_dt_ids,
+ .pm = &imx_tpm_pwm_pm,
+ },
+ .probe = pwm_imx_tpm_probe,
+ .remove = pwm_imx_tpm_remove,
+};
+module_platform_driver(imx_tpm_pwm_driver);
+
+MODULE_AUTHOR("Anson Huang <Anson.Huang@xxxxxxx>");
+MODULE_DESCRIPTION("i.MX TPM PWM Driver");
+MODULE_LICENSE("GPL v2");
--
2.7.4