Re: [PATCH v5 04/14] soc: mediatek: Refactor polling timeout and documentation

[Nicolas Boichat]

On Tue, Mar 19, 2019 at 4:02 PM Weiyi Lu <weiyi.lu@xxxxxxxxxxxx> wrote:
>
> Use USEC_PER_SEC to indicate the polling timeout directly.
> And add documentation of scp_domain_data.
>
> Signed-off-by: Weiyi Lu <weiyi.lu@xxxxxxxxxxxx>
> ---
>  drivers/soc/mediatek/mtk-scpsys.c | 14 +++++++++++++-
>  1 file changed, 13 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/soc/mediatek/mtk-scpsys.c b/drivers/soc/mediatek/mtk-scpsys.c
> index 9f52f501178b..2855111b221a 100644
> --- a/drivers/soc/mediatek/mtk-scpsys.c
> +++ b/drivers/soc/mediatek/mtk-scpsys.c
> @@ -21,7 +21,7 @@
>  #include <dt-bindings/power/mt8173-power.h>
>
>  #define MTK_POLL_DELAY_US   10
> -#define MTK_POLL_TIMEOUT    (jiffies_to_usecs(HZ))
> +#define MTK_POLL_TIMEOUT    USEC_PER_SEC
>
>  #define MTK_SCPD_ACTIVE_WAKEUP         BIT(0)
>  #define MTK_SCPD_FWAIT_SRAM            BIT(1)
> @@ -108,6 +108,18 @@ static const char * const clk_names[] = {
>
>  #define MAX_CLKS       3
>
> +/**
> + * struct scp_domain_data - scp domain data for power on/off flow
> + * @name: The domain name.
> + * @sta_mask: The mask for power on/off status bit.
> + * @ctl_offs: The offset for main power control register.
> + * @sram_pdn_bits: The mask for sram power control bits.
> + * @sram_pdn_ack_bits: The mask for sram power control acked bits.
> + * @bus_prot_mask: The mask for single step bus protection.
> + * @clk_id: The basic clock needs to be enabled before enabling certain
> + *          power domains.

I assume these are the clock*s* that *this* scp_domain requires?

So maybe just: "The basic clocks required by this power domain." ?

> + * @caps: The flag for active wake-up action.
> + */
>  struct scp_domain_data {
>         const char *name;
>         u32 sta_mask;
> --
> 2.18.0
>