[PATCH] regulator: core: fix error path for regulator_set_voltage_unlocked

[Steve Twiss]

During several error paths in the function
regulator_set_voltage_unlocked() the value of 'ret' can take on negative
error values. However, in calls that go through the 'goto out' statement,
this return value is lost and return 0 is used instead, indicating a
'pass'.

There are several cases where this function should legitimately return a
fail instead of a pass: one such case includes constraints check during
voltage selection in the call to regulator_check_voltage(), which can
have -EINVAL for the case when an unsupported voltage is incorrectly
requested. In that case, -22 is expected as the return value, not 0.

Fixes: 9243a195be7a ("regulator: core: Change voltage setting path")
Cc: stable <stable@xxxxxxxxxxxxxxx>
Signed-off-by: Steve Twiss <stwiss.opensource@xxxxxxxxxxx>
Reviewed-by: Dmitry Osipenko <digetx@xxxxxxxxx>
Signed-off-by: Mark Brown <broonie@xxxxxxxxxx>
---
 drivers/regulator/core.c | 11 ++++-------
 1 file changed, 4 insertions(+), 7 deletions(-)

diff --git a/drivers/regulator/core.c b/drivers/regulator/core.c
index 68473d0cc57e..968dcd9d7a07 100644
--- a/drivers/regulator/core.c
+++ b/drivers/regulator/core.c
@@ -3322,15 +3322,12 @@ static int regulator_set_voltage_unlocked(struct regulator *regulator,
 
 	/* for not coupled regulators this will just set the voltage */
 	ret = regulator_balance_voltage(rdev, state);
-	if (ret < 0)
-		goto out2;
+	if (ret < 0) {
+		voltage->min_uV = old_min_uV;
+		voltage->max_uV = old_max_uV;
+	}
 
 out:
-	return 0;
-out2:
-	voltage->min_uV = old_min_uV;
-	voltage->max_uV = old_max_uV;
-
 	return ret;
 }
 
-- 
2.20.1