RE: [PATCH] arm64: dts: imx8qxp: fix mbox-cells

[Peng Fan]

Hi Shawn,

> -----Original Message-----
> From: Aisheng Dong
> Sent: 2019年3月15日 18:24
> To: Peng Fan <peng.fan@xxxxxxx>; robh+dt@xxxxxxxxxx;
> mark.rutland@xxxxxxx; shawnguo@xxxxxxxxxx; s.hauer@xxxxxxxxxxxxxx;
> kernel@xxxxxxxxxxxxxx; festevam@xxxxxxxxx; dl-linux-imx
> <linux-imx@xxxxxxx>; Anson Huang <anson.huang@xxxxxxx>; Daniel Baluta
> <daniel.baluta@xxxxxxx>; devicetree@xxxxxxxxxxxxxxx;
> linux-arm-kernel@xxxxxxxxxxxxxxxxxxx; linux-kernel@xxxxxxxxxxxxxxx
> Cc: van.freenix@xxxxxxxxx
> Subject: RE: [PATCH] arm64: dts: imx8qxp: fix mbox-cells
> 
> > From: Peng Fan
> >
> > Subject: [PATCH] arm64: dts: imx8qxp: fix mbox-cells
> >
> > Currently lsio_mu1 is used by Linux Kernel with mbox-cells as 2, but actually
> > mu0-4 could be used to communicate with SCU. So fix the mbox-cells.
> >
> > Signed-off-by: Peng Fan <peng.fan@xxxxxxx>
> 
> Reviewed-by: Dong Aisheng <aisheng.dong@xxxxxxx>

Would you pick up this patch?

Thanks,
Peng.

> 
> Regards
> Dong Aisheng
> 
> > ---
> >  arch/arm64/boot/dts/freescale/imx8qxp.dtsi | 6 +++---
> >  1 file changed, 3 insertions(+), 3 deletions(-)
> >
> > diff --git a/arch/arm64/boot/dts/freescale/imx8qxp.dtsi
> > b/arch/arm64/boot/dts/freescale/imx8qxp.dtsi
> > index 4c3dd95ed488..16766838ac77 100644
> > --- a/arch/arm64/boot/dts/freescale/imx8qxp.dtsi
> > +++ b/arch/arm64/boot/dts/freescale/imx8qxp.dtsi
> > @@ -328,7 +328,7 @@
> >  			compatible = "fsl,imx8qxp-mu", "fsl,imx6sx-mu";
> >  			reg = <0x5d1b0000 0x10000>;
> >  			interrupts = <GIC_SPI 176 IRQ_TYPE_LEVEL_HIGH>;
> > -			#mbox-cells = <0>;
> > +			#mbox-cells = <2>;
> >  			status = "disabled";
> >  		};
> >
> > @@ -343,7 +343,7 @@
> >  			compatible = "fsl,imx8qxp-mu", "fsl,imx6sx-mu";
> >  			reg = <0x5d1e0000 0x10000>;
> >  			interrupts = <GIC_SPI 179 IRQ_TYPE_LEVEL_HIGH>;
> > -			#mbox-cells = <0>;
> > +			#mbox-cells = <2>;
> >  			status = "disabled";
> >  		};
> >
> > @@ -351,7 +351,7 @@
> >  			compatible = "fsl,imx8qxp-mu", "fsl,imx6sx-mu";
> >  			reg = <0x5d1f0000 0x10000>;
> >  			interrupts = <GIC_SPI 180 IRQ_TYPE_LEVEL_HIGH>;
> > -			#mbox-cells = <0>;
> > +			#mbox-cells = <2>;
> >  			status = "disabled";
> >  		};
> >
> > --
> > 2.16.4