[PATCH RESEND] regulator: tps65086: Fix tps65086_ldoa1_ranges for selector 0xB

[Axel Lin]

selector 0xB (1011) should be 2.6V rather than 2.7V, fit ix.

Table 5-4. LDOA1 Output Voltage Options
VID Bits VOUT VID Bits VOUT VID Bits VOUT VID Bits VOUT
0000     1.35 0100     1.8  1000     2.3  1100     2.85
0001     1.5  0101     1.9  1001     2.4  1101     3.0
0010     1.6  0110     2.0  1010     2.5  1110     3.3
0011     1.7  0111     2.1  1011     2.6  1111     Not Used

Fixes: d2a2e729a666 ("regulator: tps65086: Add regulator driver for the TPS65086 PMIC")
Signed-off-by: Axel Lin <axel.lin@xxxxxxxxxx>
Acked-by: Andrew F. Davis <afd@xxxxxx>
---
This patch was sent on https://lkml.org/lkml/2019/3/4/349
With Andrew's Acked.

 drivers/regulator/tps65086-regulator.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/regulator/tps65086-regulator.c b/drivers/regulator/tps65086-regulator.c
index 45e96e154690..5a5e9b5bf4be 100644
--- a/drivers/regulator/tps65086-regulator.c
+++ b/drivers/regulator/tps65086-regulator.c
@@ -90,8 +90,8 @@ static const struct regulator_linear_range tps65086_buck345_25mv_ranges[] = {
 static const struct regulator_linear_range tps65086_ldoa1_ranges[] = {
 	REGULATOR_LINEAR_RANGE(1350000, 0x0, 0x0, 0),
 	REGULATOR_LINEAR_RANGE(1500000, 0x1, 0x7, 100000),
-	REGULATOR_LINEAR_RANGE(2300000, 0x8, 0xA, 100000),
-	REGULATOR_LINEAR_RANGE(2700000, 0xB, 0xD, 150000),
+	REGULATOR_LINEAR_RANGE(2300000, 0x8, 0xB, 100000),
+	REGULATOR_LINEAR_RANGE(2850000, 0xC, 0xD, 150000),
 	REGULATOR_LINEAR_RANGE(3300000, 0xE, 0xE, 0),
 };
 
-- 
2.17.1