Re: [PATCH V3 05/10] arm64: tegra: fix default tap and trim values

[Ulf Hansson]

On Wed, 13 Mar 2019 at 22:45, Sowjanya Komatineni
<skomatineni@xxxxxxxxxx> wrote:
>
> Default tap and trim values are incorrect for Tegra186 SDMMC4.
> This patch fixes it.
>
> Tested-by: Jon Hunter <jonathanh@xxxxxxxxxx>
> Signed-off-by: Sowjanya Komatineni <skomatineni@xxxxxxxxxx>

Is this a fix and/or for stable?

In either case, I am leaving this for arm-soc.

Kind regards
Uffe


> ---
>  arch/arm64/boot/dts/nvidia/tegra186.dtsi | 4 ++--
>  1 file changed, 2 insertions(+), 2 deletions(-)
>
> diff --git a/arch/arm64/boot/dts/nvidia/tegra186.dtsi b/arch/arm64/boot/dts/nvidia/tegra186.dtsi
> index 97aeb946ed5e..472f55fe9488 100644
> --- a/arch/arm64/boot/dts/nvidia/tegra186.dtsi
> +++ b/arch/arm64/boot/dts/nvidia/tegra186.dtsi
> @@ -317,8 +317,8 @@
>                 nvidia,pad-autocal-pull-down-offset-1v8-timeout = <0x0a>;
>                 nvidia,pad-autocal-pull-up-offset-3v3-timeout = <0x0a>;
>                 nvidia,pad-autocal-pull-down-offset-3v3-timeout = <0x0a>;
> -               nvidia,default-tap = <0x5>;
> -               nvidia,default-trim = <0x9>;
> +               nvidia,default-tap = <0x9>;
> +               nvidia,default-trim = <0x5>;
>                 nvidia,dqs-trim = <63>;
>                 mmc-hs400-1_8v;
>                 status = "disabled";
> --
> 2.7.4
>