Re: [PATCH v3 2/2] arm64: dts: rockchip: add HDMI sound node for rk3328-rock64
From: Katsuhiro Suzuki
Date: Thu Mar 21 2019 - 10:54:12 EST
Hello Jonas,
Thank you for reply.
On 2019/03/17 21:33, Jonas Karlman wrote:
Hello Katsuhiro,
Sorry for the delay, I have not been able to fully test this yet but will do more testing later tonight.
My concern are regarding how to configure a single graph card node to add a hdmi: (and iec958: for spdif) variants using an alsa config file.
In LibreELEC I expose HDMI and SPDIF as two different card nodes to simplify applying alsa config files, see [1] and [2] for the alsa config files I use.
Do you know how I can configure the hdmi: and iec958: cards and add a "IEC958 Playback" ctl with the combined graph card node?
Currently I don't know how to and I don't have test environment for
IEC958 sound. Sorry...
I am also working on NL-PCM/HBR-audio support for dw-hdmi-i2s and it will require "IEC958 Playback" ctl and players such as kodi and mpv only sets AES0-3 for hdmi: and iec958: cards.
[1] https://github.com/LibreELEC/LibreELEC.tv/blob/master/projects/Rockchip/filesystem/usr/share/alsa/cards/HDMI.conf
[2] https://github.com/LibreELEC/LibreELEC.tv/blob/master/projects/Rockchip/filesystem/usr/share/alsa/cards/SPDIF.conf
Ah, I don't consider about Non-LPCM sound. I understand your concern.
My patch should be keeping until this problem is solved.
I'm going to find test environment and try KODI or mpv. Thank you for
great information!
Best Regards,
Katsuhiro Suzuki
Regards,
Jonas
On 2019-03-17 10:54, Katsuhiro Suzuki wrote:
Hello Jonas,
How about this topic?
I think this patch does not have bad effect for multi channel
sound of HDMI. If you don't think so, please tell me.
I wait your sound patch and after re-check this patch.
Best Regards,
Katsuhiro Suzuki
On 2019/03/03 4:26, Katsuhiro Suzuki wrote:
Hello Jonas,
Thanks for your comments.
On 2019/03/03 2:20, Jonas Karlman wrote:
On 2019-03-02 15:19, Katsuhiro Suzuki wrote:
Ping...
On 2019/02/18 2:34, Katsuhiro Suzuki wrote:
This patch adds HDMI sound (I2S0) node for rock64.
After apply this patch, UART2 will fail to allocate DMA resources
but UART driver can work fine without DMA.
This error is related to the DMAC of rk3328 (pl330 or compatible).
DMAC connected to 16 DMA sources. Each sources have ID number that is
called 'Req number' in rk3328 TRM. Currently total 7 sources has been
activated as follows:
| Req number | Source | Required |
| | | channels |
|------------+--------+-----------|
| 14, 15ÂÂÂÂ | I2S1ÂÂ | 2chÂÂÂÂÂÂ |
| 6, 7 | UART2 | 2ch |
|ÂÂÂÂ 10ÂÂÂÂ | SPDIFÂ | 1chÂÂÂÂÂÂ |
| 8, 9 | SPI0 | 2ch |
|------------+--------+-----------|
| | Total | 7ch |
HDMI audio needs to activate new source I2S0 (Req number 11 and 12).
I2S0 can work concurrently with other sources, but rk3328 DMAC can
use max 8 channels at same time. If I2S0 is simply activated by this
patch, required DMAC channels will be 9. So last one (UART2) cannot
allocate the DMA resources.
Virt-dma mechanism for pl0330 DMAC driver is needed to fix this
problem.
Signed-off-by: Katsuhiro Suzuki <katsuhiro@xxxxxxxxxxxxx>
---
ÂÂ .../arm64/boot/dts/rockchip/rk3328-rock64.dts | 21
++++++++++++++++++-
ÂÂ 1 file changed, 20 insertions(+), 1 deletion(-)
diff --git a/arch/arm64/boot/dts/rockchip/rk3328-rock64.dts
b/arch/arm64/boot/dts/rockchip/rk3328-rock64.dts
index 2157a528276b..bfc0930d245c 100644
--- a/arch/arm64/boot/dts/rockchip/rk3328-rock64.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3328-rock64.dts
@@ -68,7 +68,8 @@
ÂÂÂÂÂÂ sound {
ÂÂÂÂÂÂÂÂÂÂ compatible = "audio-graph-card";
ÂÂÂÂÂÂÂÂÂÂ label = "rockchip,rk3328";
-ÂÂÂÂÂÂÂ dais = <&i2s1_p0
+ÂÂÂÂÂÂÂ dais = <&i2s0_p0
+ÂÂÂÂÂÂÂÂÂÂÂ &i2s1_p0
ÂÂÂÂÂÂÂÂÂÂÂÂÂÂ &spdif_p0>;
I am working on multi-channel hdmi audio support for dw-hdmi at [1]
and are wondering if having multiple dais on one graph card
instead of a separate hdmi sound card will affect the ability to
define a proper alsa config for multi channel hdmi sound.
[1]
https://github.com/Kwiboo/linux-rockchip/compare/8874c206d613dc575f5cb6e385e7a866020138d0...92b20eaa6b6dd2cf3418a428f905d10bbc62724f
It seems a part of multi channel (5.1 ch) has already been supported
by rockchip-i2s and dw-hdmi. So I applied this patch and tried below
command.
 speaker-test -D hw:0,0 -f 48000 -c 6
It does not return errors.
Would you tell me more details you worried about if something wrong?
FYI: Rock64 PCM devices are as follows after applied this patch.
~~~~~
$ cat /proc/asound/pcm
00-00: ff000000.i2s-i2s-hifi i2s-hifi-0 :Â : playback 1
00-01: ff010000.i2s-rk3328-hifi ff410000.codec-1 :Â : playback 1 :
capture 1
00-02: ff030000.spdif-dit-hifi dit-hifi-2 :Â : playback 1
~~~~~
Best Regards,
Katsuhiro Suzuki
Regards,
Jonas
ÂÂÂÂÂÂ };
@@ -141,6 +142,12 @@
ÂÂ &hdmi {
ÂÂÂÂÂÂ status = "okay";
+
+ÂÂÂ port@0 {
+ÂÂÂÂÂÂÂ hdmi_p0_0: endpoint {
+ÂÂÂÂÂÂÂÂÂÂÂ remote-endpoint = <&i2s0_p0_0>;
+ÂÂÂÂÂÂÂ };
+ÂÂÂ };
ÂÂ };
ÂÂ &hdmiphy {
@@ -256,6 +263,18 @@
ÂÂÂÂÂÂ };
ÂÂ };
+&i2s0 {
+ÂÂÂ status = "okay";
+
+ÂÂÂ i2s0_p0: port {
+ÂÂÂÂÂÂÂ i2s0_p0_0: endpoint {
+ÂÂÂÂÂÂÂÂÂÂÂ dai-format = "i2s";
+ÂÂÂÂÂÂÂÂÂÂÂ mclk-fs = <256>;
+ÂÂÂÂÂÂÂÂÂÂÂ remote-endpoint = <&hdmi_p0_0>;
+ÂÂÂÂÂÂÂ };
+ÂÂÂ };
+};
+
ÂÂ &i2s1 {
ÂÂÂÂÂÂ status = "okay";
_______________________________________________
Linux-rockchip mailing list
Linux-rockchip@xxxxxxxxxxxxxxxxxxx
http://lists.infradead.org/mailman/listinfo/linux-rockchip