[RFC PATCH] x86/cpu/hygon: Fix phys_proc_id calculation logic for multi-die processor

[Pu Wen]

For Hygon family 18h multi-die processor platform, which support 1-Die/
2-Die/4-Die per socket, the system view is shown in the following system
topology.

System View (with 1-Die 2-Socket):
           |------------|
         ------       -----
 SOCKET0 | D0 |       | D1 |  SOCKET1
         ------       -----

System View (with 2-Die 2-socket):
           --------------------
           |     -------------|------
           |     |            |     |
         ------------       ------------
 SOCKET0 | D1 -- D0 |       | D3 -- D2 | SOCKET1
         ------------       ------------

System View (with 4-Die 2-Socket) :
           --------------------
           |     -------------|------
           |     |            |     |
         ------------       ------------
         | D1 -- D0 |       | D7 -- D6 |
         | |  \/ |  |       | |  \/ |  |
 SOCKET0 | |  /\ |  |       | |  /\ |  | SOCKET1
         | D2 -- D3 |       | D4 -- D5 |
         ------------       ------------
           |     |            |     |
           ------|------------|     |
                 --------------------

Current codes direct use "phys_proc_id = initial_apicid >> bits", which
calc phys_proc_id from initial_apicid by shifting *bits*, will get
wrong phys_proc_id for Hygon family 18h 1-Die/2-Die 2-socket system.

According to document [1] section 2.1.11.1, the *bits* is the value of
CPUID_Fn80000008_ECX[12:15]. The value may be 4, 5 or 6. The definitions
are: 4 - 1 die, 5 - 2 die, 6 - 3/4 die.

ApicId definition is as below (see section 2.1.10.2.1.3 of [1]):
             -------------------------------------------------
         Bit |     6     |   5  4  |    3   |    2   1   0   |
             |-----------|---------|--------|----------------|
         IDs | Socket ID | Node ID | CCX ID | Core/Thread ID |
             -------------------------------------------------

So for 3/4-Die CPU the *bits* is 6, which is same to ApicID definition
field, which still can get correct socket ID for 2-socket system. But
for 1-Die or 2-Die CPU the *bits* is 4 or 5, which will cause the right
shifted result is not exactly the value of socket ID.

For Hygon family 18h CPU the socket ID should be obtained from ApicId[6].
To fix the problem and match ApicID field definition, adjust the shift
bits to 6 for all Hygon family 18h multi-die CPUs.

Reference:
[1] https://www.amd.com/system/files/TechDocs/54945_PPR_Family_17h_Models_00h-0Fh.pdf

Signed-off-by: Pu Wen <puwen@xxxxxxxx>
---
 arch/x86/kernel/cpu/hygon.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/arch/x86/kernel/cpu/hygon.c b/arch/x86/kernel/cpu/hygon.c
index cf25405..2df6dd9 100644
--- a/arch/x86/kernel/cpu/hygon.c
+++ b/arch/x86/kernel/cpu/hygon.c
@@ -87,6 +87,9 @@ static void hygon_get_topology(struct cpuinfo_x86 *c)
 		if (!err)
 			c->x86_coreid_bits = get_count_order(c->x86_max_cores);
 
+		/* Socket ID is ApicId[6] for these processors. */
+		c->phys_proc_id = c->apicid >> 6;
+
 		cacheinfo_hygon_init_llc_id(c, cpu, node_id);
 	} else if (cpu_has(c, X86_FEATURE_NODEID_MSR)) {
 		u64 value;
-- 
2.7.4