[PATCH v2 0/2] Add support for MIPID02 CSI-2 to PARALLEL bridge I2C device

[Mickael Guene]

Hi,

This is the v2 of my MIPID02 series which introduces support of
STMicroelectronics MIPID02 CSI-2 to PARALLEL I2C bridge. It allows using a CSI-2
sensor with a PARALLEL interface. Current driver implementation doesn't support
CSI-2 second input port usage. It doesn't support also YUV420, RGB565 and RGB444
input formats.

Thanks to Sakari for v1 series review.

Changes in v2:
- Add precision about first CSI-2 port data rate
- Document endpoints supported properties
- Rename 'mipid02@14' into generic 'csi2rx@14' in example
- Merge MAINTAINERS patch 3 into patch 1 and 2
- Fix line too long in Kconfig
- Add missing delay after reset release
- Various style fixes
- Fix mipid02_stream_enable returning no error when mipid02_find_sensor failed

Mickael Guene (2):
  dt-bindings: Document MIPID02 bindings
  media:st-mipid02: MIPID02 CSI-2 to PARALLEL bridge driver

 .../bindings/media/i2c/st,st-mipid02.txt           |  83 ++
 MAINTAINERS                                        |   8 +
 drivers/media/i2c/Kconfig                          |  14 +
 drivers/media/i2c/Makefile                         |   1 +
 drivers/media/i2c/st-mipid02.c                     | 877 +++++++++++++++++++++
 5 files changed, 983 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/media/i2c/st,st-mipid02.txt
 create mode 100644 drivers/media/i2c/st-mipid02.c

-- 
2.7.4