[PATCH v5 3/6] dt-bindings: reset: Add bindings for ZynqMP reset driver
From: Nava kishore Manne
Date: Tue Mar 26 2019 - 10:32:01 EST
Add documentation to describe Xilinx ZynqMP reset driver
bindings.
Signed-off-by: Nava kishore Manne <nava.manne@xxxxxxxxxx>
Signed-off-by: Jolly Shah <jollys@xxxxxxxxxx>
Reviewed-by: Rob Herring <robh@xxxxxxxxxx>
---
.../bindings/reset/xlnx,zynqmp-reset.txt | 52 +++++++
.../dt-bindings/reset/xlnx-zynqmp-resets.h | 130 ++++++++++++++++++
2 files changed, 182 insertions(+)
create mode 100644 Documentation/devicetree/bindings/reset/xlnx,zynqmp-reset.txt
create mode 100644 include/dt-bindings/reset/xlnx-zynqmp-resets.h
diff --git a/Documentation/devicetree/bindings/reset/xlnx,zynqmp-reset.txt b/Documentation/devicetree/bindings/reset/xlnx,zynqmp-reset.txt
new file mode 100644
index 000000000000..27a45fe5ecf1
--- /dev/null
+++ b/Documentation/devicetree/bindings/reset/xlnx,zynqmp-reset.txt
@@ -0,0 +1,52 @@
+--------------------------------------------------------------------------
+ = Zynq UltraScale+ MPSoC reset driver binding =
+--------------------------------------------------------------------------
+The Zynq UltraScale+ MPSoC has several different resets.
+
+See Chapter 36 of the Zynq UltraScale+ MPSoC TRM (UG) for more information
+about zynqmp resets.
+
+Please also refer to reset.txt in this directory for common reset
+controller binding usage.
+
+Required Properties:
+- compatible: "xlnx,zynqmp-reset"
+- #reset-cells: Specifies the number of cells needed to encode reset
+ line, should be 1
+
+-------
+Example
+-------
+
+firmware {
+ zynqmp_firmware: zynqmp-firmware {
+ compatible = "xlnx,zynqmp-firmware";
+ method = "smc";
+
+ zynqmp_reset: reset-controller {
+ compatible = "xlnx,zynqmp-reset";
+ #reset-cells = <1>;
+ };
+ };
+};
+
+Specifying reset lines connected to IP modules
+==============================================
+
+Device nodes that need access to reset lines should
+specify them as a reset phandle in their corresponding node as
+specified in reset.txt.
+
+For list of all valid reset indicies see
+<dt-bindings/reset/xlnx-zynqmp-resets.h>
+
+Example:
+
+serdes: zynqmp_phy@fd400000 {
+ ...
+
+ resets = <&zynqmp_reset ZYNQMP_RESET_SATA>;
+ reset-names = "sata_rst";
+
+ ...
+};
diff --git a/include/dt-bindings/reset/xlnx-zynqmp-resets.h b/include/dt-bindings/reset/xlnx-zynqmp-resets.h
new file mode 100644
index 000000000000..e295fd5d824e
--- /dev/null
+++ b/include/dt-bindings/reset/xlnx-zynqmp-resets.h
@@ -0,0 +1,130 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (C) 2018 Xilinx, Inc.
+ */
+
+#ifndef _DT_BINDINGS_ZYNQMP_RESETS_H
+#define _DT_BINDINGS_ZYNQMP_RESETS_H
+
+#define ZYNQMP_RESET_PCIE_CFG 0
+#define ZYNQMP_RESET_PCIE_BRIDGE 1
+#define ZYNQMP_RESET_PCIE_CTRL 2
+#define ZYNQMP_RESET_DP 3
+#define ZYNQMP_RESET_SWDT_CRF 4
+#define ZYNQMP_RESET_AFI_FM5 5
+#define ZYNQMP_RESET_AFI_FM4 6
+#define ZYNQMP_RESET_AFI_FM3 7
+#define ZYNQMP_RESET_AFI_FM2 8
+#define ZYNQMP_RESET_AFI_FM1 9
+#define ZYNQMP_RESET_AFI_FM0 10
+#define ZYNQMP_RESET_GDMA 11
+#define ZYNQMP_RESET_GPU_PP1 12
+#define ZYNQMP_RESET_GPU_PP0 13
+#define ZYNQMP_RESET_GPU 14
+#define ZYNQMP_RESET_GT 15
+#define ZYNQMP_RESET_SATA 16
+#define ZYNQMP_RESET_ACPU3_PWRON 17
+#define ZYNQMP_RESET_ACPU2_PWRON 18
+#define ZYNQMP_RESET_ACPU1_PWRON 19
+#define ZYNQMP_RESET_ACPU0_PWRON 20
+#define ZYNQMP_RESET_APU_L2 21
+#define ZYNQMP_RESET_ACPU3 22
+#define ZYNQMP_RESET_ACPU2 23
+#define ZYNQMP_RESET_ACPU1 24
+#define ZYNQMP_RESET_ACPU0 25
+#define ZYNQMP_RESET_DDR 26
+#define ZYNQMP_RESET_APM_FPD 27
+#define ZYNQMP_RESET_SOFT 28
+#define ZYNQMP_RESET_GEM0 29
+#define ZYNQMP_RESET_GEM1 30
+#define ZYNQMP_RESET_GEM2 31
+#define ZYNQMP_RESET_GEM3 32
+#define ZYNQMP_RESET_QSPI 33
+#define ZYNQMP_RESET_UART0 34
+#define ZYNQMP_RESET_UART1 35
+#define ZYNQMP_RESET_SPI0 36
+#define ZYNQMP_RESET_SPI1 37
+#define ZYNQMP_RESET_SDIO0 38
+#define ZYNQMP_RESET_SDIO1 39
+#define ZYNQMP_RESET_CAN0 40
+#define ZYNQMP_RESET_CAN1 41
+#define ZYNQMP_RESET_I2C0 42
+#define ZYNQMP_RESET_I2C1 43
+#define ZYNQMP_RESET_TTC0 44
+#define ZYNQMP_RESET_TTC1 45
+#define ZYNQMP_RESET_TTC2 46
+#define ZYNQMP_RESET_TTC3 47
+#define ZYNQMP_RESET_SWDT_CRL 48
+#define ZYNQMP_RESET_NAND 49
+#define ZYNQMP_RESET_ADMA 50
+#define ZYNQMP_RESET_GPIO 51
+#define ZYNQMP_RESET_IOU_CC 52
+#define ZYNQMP_RESET_TIMESTAMP 53
+#define ZYNQMP_RESET_RPU_R50 54
+#define ZYNQMP_RESET_RPU_R51 55
+#define ZYNQMP_RESET_RPU_AMBA 56
+#define ZYNQMP_RESET_OCM 57
+#define ZYNQMP_RESET_RPU_PGE 58
+#define ZYNQMP_RESET_USB0_CORERESET 59
+#define ZYNQMP_RESET_USB1_CORERESET 60
+#define ZYNQMP_RESET_USB0_HIBERRESET 61
+#define ZYNQMP_RESET_USB1_HIBERRESET 62
+#define ZYNQMP_RESET_USB0_APB 63
+#define ZYNQMP_RESET_USB1_APB 64
+#define ZYNQMP_RESET_IPI 65
+#define ZYNQMP_RESET_APM_LPD 66
+#define ZYNQMP_RESET_RTC 67
+#define ZYNQMP_RESET_SYSMON 68
+#define ZYNQMP_RESET_AFI_FM6 69
+#define ZYNQMP_RESET_LPD_SWDT 70
+#define ZYNQMP_RESET_FPD 71
+#define ZYNQMP_RESET_RPU_DBG1 72
+#define ZYNQMP_RESET_RPU_DBG0 73
+#define ZYNQMP_RESET_DBG_LPD 74
+#define ZYNQMP_RESET_DBG_FPD 75
+#define ZYNQMP_RESET_APLL 76
+#define ZYNQMP_RESET_DPLL 77
+#define ZYNQMP_RESET_VPLL 78
+#define ZYNQMP_RESET_IOPLL 79
+#define ZYNQMP_RESET_RPLL 80
+#define ZYNQMP_RESET_GPO3_PL_0 81
+#define ZYNQMP_RESET_GPO3_PL_1 82
+#define ZYNQMP_RESET_GPO3_PL_2 83
+#define ZYNQMP_RESET_GPO3_PL_3 84
+#define ZYNQMP_RESET_GPO3_PL_4 85
+#define ZYNQMP_RESET_GPO3_PL_5 86
+#define ZYNQMP_RESET_GPO3_PL_6 87
+#define ZYNQMP_RESET_GPO3_PL_7 88
+#define ZYNQMP_RESET_GPO3_PL_8 89
+#define ZYNQMP_RESET_GPO3_PL_9 90
+#define ZYNQMP_RESET_GPO3_PL_10 91
+#define ZYNQMP_RESET_GPO3_PL_11 92
+#define ZYNQMP_RESET_GPO3_PL_12 93
+#define ZYNQMP_RESET_GPO3_PL_13 94
+#define ZYNQMP_RESET_GPO3_PL_14 95
+#define ZYNQMP_RESET_GPO3_PL_15 96
+#define ZYNQMP_RESET_GPO3_PL_16 97
+#define ZYNQMP_RESET_GPO3_PL_17 98
+#define ZYNQMP_RESET_GPO3_PL_18 99
+#define ZYNQMP_RESET_GPO3_PL_19 100
+#define ZNQMP_RESET_GPO3_PL_20 101
+#define ZYNQMP_RESET_GPO3_PL_21 102
+#define ZYNQMP_RESET_GPO3_PL_22 103
+#define ZYNQMP_RESET_GPO3_PL_23 104
+#define ZYNQMP_RESET_GPO3_PL_24 105
+#define ZYNQMP_RESET_GPO3_PL_25 106
+#define ZYNQMP_RESET_GPO3_PL_26 107
+#define ZYNQMP_RESET_GPO3_PL_27 108
+#define ZYNQMP_RESET_GPO3_PL_28 109
+#define ZYNQMP_RESET_GPO3_PL_29 110
+#define ZYNQMP_RESET_GPO3_PL_30 111
+#define ZYNQMP_RESET_GPO3_PL_31 112
+#define ZYNQMP_RESET_RPU_LS 113
+#define ZYNQMP_RESET_PS_ONLY 114
+#define ZYNQMP_RESET_PL 115
+#define ZYNQMP_RESET_PS_PL0 116
+#define ZYNQMP_RESET_PS_PL1 117
+#define ZYNQMP_RESET_PS_PL2 118
+#define ZYNQMP_RESET_PS_PL3 119
+
+#endif
--
2.18.0