[PATCH v7 1/4] ACPI/IORT: Add support for PMCG

[Shameer Kolothum]

From: Neil Leeder <nleeder@xxxxxxxxxxxxxx>

Add support for the SMMU Performance Monitor Counter Group
information from ACPI. This is in preparation for its use
in the SMMUv3 PMU driver.

Signed-off-by: Neil Leeder <nleeder@xxxxxxxxxxxxxx>
Signed-off-by: Hanjun Guo <guohanjun@xxxxxxxxxx>
Signed-off-by: Shameer Kolothum <shameerali.kolothum.thodi@xxxxxxxxxx>
Reviewed-by: Robin Murphy <robin.murphy@xxxxxxx>
Acked-by: Lorenzo Pieralisi <lorenzo.pieralisi@xxxxxxx>
---
 drivers/acpi/arm64/iort.c | 117 ++++++++++++++++++++++++++++++++++++----------
 include/linux/acpi_iort.h |   7 +++
 2 files changed, 100 insertions(+), 24 deletions(-)

diff --git a/drivers/acpi/arm64/iort.c b/drivers/acpi/arm64/iort.c
index e48894e..e2c9b26 100644
--- a/drivers/acpi/arm64/iort.c
+++ b/drivers/acpi/arm64/iort.c
@@ -356,7 +356,8 @@ static struct acpi_iort_node *iort_node_get_id(struct acpi_iort_node *node,
 	if (map->flags & ACPI_IORT_ID_SINGLE_MAPPING) {
 		if (node->type == ACPI_IORT_NODE_NAMED_COMPONENT ||
 		    node->type == ACPI_IORT_NODE_PCI_ROOT_COMPLEX ||
-		    node->type == ACPI_IORT_NODE_SMMU_V3) {
+		    node->type == ACPI_IORT_NODE_SMMU_V3 ||
+		    node->type == ACPI_IORT_NODE_PMCG) {
 			*id_out = map->output_base;
 			return parent;
 		}
@@ -394,6 +395,8 @@ static int iort_get_id_mapping_index(struct acpi_iort_node *node)
 		}
 
 		return smmu->id_mapping_index;
+	case ACPI_IORT_NODE_PMCG:
+		return 0;
 	default:
 		return -EINVAL;
 	}
@@ -1218,14 +1221,23 @@ static void __init arm_smmu_v3_init_resources(struct resource *res,
 	}
 }
 
-static bool __init arm_smmu_v3_is_coherent(struct acpi_iort_node *node)
+static void __init arm_smmu_v3_dma_configure(struct device *dev,
+					     struct acpi_iort_node *node)
 {
 	struct acpi_iort_smmu_v3 *smmu;
+	enum dev_dma_attr attr;
 
 	/* Retrieve SMMUv3 specific data */
 	smmu = (struct acpi_iort_smmu_v3 *)node->node_data;
 
-	return smmu->flags & ACPI_IORT_SMMU_V3_COHACC_OVERRIDE;
+	attr = (smmu->flags & ACPI_IORT_SMMU_V3_COHACC_OVERRIDE) ?
+			DEV_DMA_COHERENT : DEV_DMA_NON_COHERENT;
+
+	/* We expect the dma masks to be equivalent for all SMMUv3 set-ups */
+	dev->dma_mask = &dev->coherent_dma_mask;
+
+	/* Configure DMA for the page table walker */
+	acpi_dma_configure(dev, attr);
 }
 
 #if defined(CONFIG_ACPI_NUMA)
@@ -1301,30 +1313,82 @@ static void __init arm_smmu_init_resources(struct resource *res,
 	}
 }
 
-static bool __init arm_smmu_is_coherent(struct acpi_iort_node *node)
+static void __init arm_smmu_dma_configure(struct device *dev,
+					  struct acpi_iort_node *node)
 {
 	struct acpi_iort_smmu *smmu;
+	enum dev_dma_attr attr;
 
 	/* Retrieve SMMU specific data */
 	smmu = (struct acpi_iort_smmu *)node->node_data;
 
-	return smmu->flags & ACPI_IORT_SMMU_COHERENT_WALK;
+	attr = (smmu->flags & ACPI_IORT_SMMU_COHERENT_WALK) ?
+			DEV_DMA_COHERENT : DEV_DMA_NON_COHERENT;
+
+	/* We expect the dma masks to be equivalent for SMMU set-ups */
+	dev->dma_mask = &dev->coherent_dma_mask;
+
+	/* Configure DMA for the page table walker */
+	acpi_dma_configure(dev, attr);
+}
+
+static int __init arm_smmu_v3_pmcg_count_resources(struct acpi_iort_node *node)
+{
+	struct acpi_iort_pmcg *pmcg;
+
+	/* Retrieve PMCG specific data */
+	pmcg = (struct acpi_iort_pmcg *)node->node_data;
+
+	/*
+	 * There are always 2 memory resources.
+	 * If the overflow_gsiv is present then add that for a total of 3.
+	 */
+	return pmcg->overflow_gsiv ? 3 : 2;
+}
+
+static void __init arm_smmu_v3_pmcg_init_resources(struct resource *res,
+						   struct acpi_iort_node *node)
+{
+	struct acpi_iort_pmcg *pmcg;
+
+	/* Retrieve PMCG specific data */
+	pmcg = (struct acpi_iort_pmcg *)node->node_data;
+
+	res[0].start = pmcg->page0_base_address;
+	res[0].end = pmcg->page0_base_address + SZ_4K - 1;
+	res[0].flags = IORESOURCE_MEM;
+	res[1].start = pmcg->page1_base_address;
+	res[1].end = pmcg->page1_base_address + SZ_4K - 1;
+	res[1].flags = IORESOURCE_MEM;
+
+	if (pmcg->overflow_gsiv)
+		acpi_iort_register_irq(pmcg->overflow_gsiv, "overflow",
+				       ACPI_EDGE_SENSITIVE, &res[2]);
+}
+
+static int __init arm_smmu_v3_pmcg_add_platdata(struct platform_device *pdev)
+{
+	u32 model = IORT_SMMU_V3_PMCG_GENERIC;
+
+	return platform_device_add_data(pdev, &model, sizeof(model));
 }
 
 struct iort_dev_config {
 	const char *name;
 	int (*dev_init)(struct acpi_iort_node *node);
-	bool (*dev_is_coherent)(struct acpi_iort_node *node);
+	void (*dev_dma_configure)(struct device *dev,
+				  struct acpi_iort_node *node);
 	int (*dev_count_resources)(struct acpi_iort_node *node);
 	void (*dev_init_resources)(struct resource *res,
 				     struct acpi_iort_node *node);
 	void (*dev_set_proximity)(struct device *dev,
 				    struct acpi_iort_node *node);
+	int (*dev_add_platdata)(struct platform_device *pdev);
 };
 
 static const struct iort_dev_config iort_arm_smmu_v3_cfg __initconst = {
 	.name = "arm-smmu-v3",
-	.dev_is_coherent = arm_smmu_v3_is_coherent,
+	.dev_dma_configure = arm_smmu_v3_dma_configure,
 	.dev_count_resources = arm_smmu_v3_count_resources,
 	.dev_init_resources = arm_smmu_v3_init_resources,
 	.dev_set_proximity = arm_smmu_v3_set_proximity,
@@ -1332,9 +1396,16 @@ static const struct iort_dev_config iort_arm_smmu_v3_cfg __initconst = {
 
 static const struct iort_dev_config iort_arm_smmu_cfg __initconst = {
 	.name = "arm-smmu",
-	.dev_is_coherent = arm_smmu_is_coherent,
+	.dev_dma_configure = arm_smmu_dma_configure,
 	.dev_count_resources = arm_smmu_count_resources,
-	.dev_init_resources = arm_smmu_init_resources
+	.dev_init_resources = arm_smmu_init_resources,
+};
+
+static const struct iort_dev_config iort_arm_smmu_v3_pmcg_cfg __initconst = {
+	.name = "arm-smmu-v3-pmcg",
+	.dev_count_resources = arm_smmu_v3_pmcg_count_resources,
+	.dev_init_resources = arm_smmu_v3_pmcg_init_resources,
+	.dev_add_platdata = arm_smmu_v3_pmcg_add_platdata,
 };
 
 static __init const struct iort_dev_config *iort_get_dev_cfg(
@@ -1345,6 +1416,8 @@ static __init const struct iort_dev_config *iort_get_dev_cfg(
 		return &iort_arm_smmu_v3_cfg;
 	case ACPI_IORT_NODE_SMMU:
 		return &iort_arm_smmu_cfg;
+	case ACPI_IORT_NODE_PMCG:
+		return &iort_arm_smmu_v3_pmcg_cfg;
 	default:
 		return NULL;
 	}
@@ -1362,7 +1435,6 @@ static int __init iort_add_platform_device(struct acpi_iort_node *node,
 	struct fwnode_handle *fwnode;
 	struct platform_device *pdev;
 	struct resource *r;
-	enum dev_dma_attr attr;
 	int ret, count;
 
 	pdev = platform_device_alloc(ops->name, PLATFORM_DEVID_AUTO);
@@ -1393,19 +1465,19 @@ static int __init iort_add_platform_device(struct acpi_iort_node *node,
 		goto dev_put;
 
 	/*
-	 * Add a copy of IORT node pointer to platform_data to
-	 * be used to retrieve IORT data information.
+	 * Platform devices based on PMCG nodes uses platform_data to
+	 * pass the hardware model info to the driver. For others, add
+	 * a copy of IORT node pointer to platform_data to be used to
+	 * retrieve IORT data information.
 	 */
-	ret = platform_device_add_data(pdev, &node, sizeof(node));
+	if (ops->dev_add_platdata)
+		ret = ops->dev_add_platdata(pdev);
+	else
+		ret = platform_device_add_data(pdev, &node, sizeof(node));
+
 	if (ret)
 		goto dev_put;
 
-	/*
-	 * We expect the dma masks to be equivalent for
-	 * all SMMUs set-ups
-	 */
-	pdev->dev.dma_mask = &pdev->dev.coherent_dma_mask;
-
 	fwnode = iort_get_fwnode(node);
 
 	if (!fwnode) {
@@ -1415,11 +1487,8 @@ static int __init iort_add_platform_device(struct acpi_iort_node *node,
 
 	pdev->dev.fwnode = fwnode;
 
-	attr = ops->dev_is_coherent && ops->dev_is_coherent(node) ?
-			DEV_DMA_COHERENT : DEV_DMA_NON_COHERENT;
-
-	/* Configure DMA for the page table walker */
-	acpi_dma_configure(&pdev->dev, attr);
+	if (ops->dev_dma_configure)
+		ops->dev_dma_configure(&pdev->dev, node);
 
 	iort_set_device_domain(&pdev->dev, node);
 
diff --git a/include/linux/acpi_iort.h b/include/linux/acpi_iort.h
index 38cd77b..052ef7b 100644
--- a/include/linux/acpi_iort.h
+++ b/include/linux/acpi_iort.h
@@ -26,6 +26,13 @@
 #define IORT_IRQ_MASK(irq)		(irq & 0xffffffffULL)
 #define IORT_IRQ_TRIGGER_MASK(irq)	((irq >> 32) & 0xffffffffULL)
 
+/*
+ * PMCG model identifiers for use in smmu pmu driver. Please note
+ * that this is purely for the use of software and has nothing to
+ * do with hardware or with IORT specification.
+ */
+#define IORT_SMMU_V3_PMCG_GENERIC        0x00000000 /* Generic SMMUv3 PMCG */
+
 int iort_register_domain_token(int trans_id, phys_addr_t base,
 			       struct fwnode_handle *fw_node);
 void iort_deregister_domain_token(int trans_id);
-- 
2.7.4