Re: [PATCH v2 2/8] kbuild: Support for Symbols.list creation
From: Joao Moreira
Date: Tue Mar 26 2019 - 14:13:42 EST
On 3/26/19 1:15 PM, Joe Lawrence wrote:
On 3/26/19 10:40 AM, Joao Moreira wrote:
On 3/20/19 4:08 PM, Miroslav Benes wrote:
diff --git a/scripts/Makefile.build b/scripts/Makefile.build
index fd03d60f6c5a..1e28ad21314c 100644
--- a/scripts/Makefile.build
+++ b/scripts/Makefile.build
@@ -247,6 +247,11 @@ cmd_gen_ksymdeps = \
ÂÂÂÂÂÂ $(CONFIG_SHELL) $(srctree)/scripts/gen_ksymdeps.sh $@ >>
$(dot-target).cmd
ÂÂ endif
+ifdef CONFIG_LIVEPATCH
+cmd_livepatch = $(if $(LIVEPATCH_$(basetarget).o),ÂÂÂÂÂÂÂÂÂÂÂ \
+ÂÂÂ $(shell touch $(MODVERDIR)/$(basetarget).livepatch))
+endif
+
ÂÂ define rule_cc_o_c
ÂÂÂÂÂÂ $(call cmd,checksrc)
ÂÂÂÂÂÂ $(call cmd_and_fixdep,cc_o_c)
@@ -283,6 +288,7 @@ $(single-used-m): $(obj)/%.o: $(src)/%.c
$(recordmcount_source) $(objtool_dep) F
ÂÂÂÂÂÂ $(call if_changed_rule,cc_o_c)
ÂÂÂÂÂÂ @{ echo $(@:.o=.ko); echo $@; \
ÂÂÂÂÂÂÂÂÂ $(cmd_undef_syms); } > $(MODVERDIR)/$(@F:.o=.mod)
+ÂÂÂ $(call cmd_livepatch)
ÂÂ quiet_cmd_cc_lst_c = MKLSTÂÂ $@
ÂÂÂÂÂÂÂÂ cmd_cc_lst_c = $(CC) $(c_flags) -g -c -o $*.o $< && \
Since cmd_livepatch is only called for single-used-m, does this mean
that we can only klp-convert single object file livepatch modules?
I stumbled upon this when trying to create a self-test module that
incorporated two object files. I tried adding a $(call cmd_livepatch)
in the recipe for $(obj)/%.o, but that didn't help. My kbuild foo
wasn't good enough to figure this one out.
I looked at my original code and it is a bit different there. I
placed it
under rule_cc_o_c right after objtool command. If I remember correctly
this is the correct recipe for .c->.o. Unfortunately I forgot the
details
and there is of course nothing about it in my notes.
Does it help?
Joao, is there a reason you moved it elsewhere?
Hi,
Unfortunately I can't remember why the chunk was moved to where it is in
this version of the patch, sorry. Yet, I did try to move this into the
rule cc_o_c and it seemed to work with not damage.
Joe, would you kindly verify and squash properly the patch below, which
places cmd_livepatch in rule_cc_o_c?
Thank you.
Subject: [PATCH] Move cmd_klp_convert to the right place
Signed-off-by: Joao Moreira <jmoreira@xxxxxxx>
---
ÂÂ scripts/Makefile.build | 2 +-
ÂÂ 1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/scripts/Makefile.build b/scripts/Makefile.build
index 1e28ad21314c..5f66106a47d6 100644
--- a/scripts/Makefile.build
+++ b/scripts/Makefile.build
@@ -260,6 +260,7 @@ define rule_cc_o_c
ÂÂÂÂÂÂÂÂÂ $(call cmd,objtool)
ÂÂÂÂÂÂÂÂÂ $(call cmd,modversions_c)
ÂÂÂÂÂÂÂÂÂ $(call cmd,record_mcount)
+ÂÂÂÂÂÂ $(call cmd,livepatch)
ÂÂ endef
ÂÂ define rule_as_o_S
@@ -288,7 +289,6 @@ $(single-used-m): $(obj)/%.o: $(src)/%.c
$(recordmcount_source) $(objtool_dep) F
ÂÂÂÂÂÂÂÂÂ $(call if_changed_rule,cc_o_c)
ÂÂÂÂÂÂÂÂÂ @{ echo $(@:.o=.ko); echo $@; \
ÂÂÂÂÂÂÂÂÂÂÂÂ $(cmd_undef_syms); } > $(MODVERDIR)/$(@F:.o=.mod)
-ÂÂÂÂÂÂ $(call cmd_livepatch)
ÂÂ quiet_cmd_cc_lst_c = MKLSTÂÂ $@
ÂÂÂÂÂÂÂÂ cmd_cc_lst_c = $(CC) $(c_flags) -g -c -o $*.o $< && \
Hi Joao,
This change seems to work okay for (again) single object modules, but
I'm having issues with multi-object modules.
Hi Joe, thanks for the sources, this made everything much easier in my
side :)
In the patch below I change a little bit the interface used to inform
kbuild that a module is a livepatch. Instead of defining the flag
LIVEPATCH_ per .o file, we define it per module (what actually makes
much more sense). We later use $(basetarget) in the Makefile for
checking the flags. By doing so, and invoking cmd_livepatch both from
the $(single-used-m) and $(multi-used-m) we ensure that the .livepatch
file is created for each module, what later in the pipeline flags the
invocation of klp-convert.
I tested the following patch with the sources you provided (with little
modifications, removing the .o from the LIVEPATCH_ definitions and using
the module name instead of the object names), achieving successful
compilation and conversion. I also tested against the sample
livepatches, thus I think it might be ok now.
Do you think we can go this way to solve the problem in v3?
-- PATCH --
Subject: [PATCH] Fix cmd_livepatch for multi-object modules
Signed-off-by: Joao Moreira <jmoreira@xxxxxxx>
---
samples/livepatch/Makefile | 10 +++++-----
scripts/Makefile.build | 5 +++--
2 files changed, 8 insertions(+), 7 deletions(-)
diff --git a/samples/livepatch/Makefile b/samples/livepatch/Makefile
index 93725c434f4f..dea530840725 100644
--- a/samples/livepatch/Makefile
+++ b/samples/livepatch/Makefile
@@ -1,8 +1,8 @@
-LIVEPATCH_livepatch-sample.o := y
-LIVEPATCH_livepatch-shadow-fix1.o := y
-LIVEPATCH_livepatch-shadow-fix2.o := y
-LIVEPATCH_livepatch-callbacks-demo.o := y
-LIVEPATCH_livepatch-annotated-sample.o := y
+LIVEPATCH_livepatch-sample := y
+LIVEPATCH_livepatch-shadow-fix1 := y
+LIVEPATCH_livepatch-shadow-fix2 := y
+LIVEPATCH_livepatch-callbacks-demo := y
+LIVEPATCH_livepatch-annotated-sample := y
obj-$(CONFIG_SAMPLE_LIVEPATCH) += livepatch-sample.o
obj-$(CONFIG_SAMPLE_LIVEPATCH) += livepatch-shadow-mod.o
diff --git a/scripts/Makefile.build b/scripts/Makefile.build
index dba89e605eab..52e69b4084d5 100644
--- a/scripts/Makefile.build
+++ b/scripts/Makefile.build
@@ -250,7 +250,7 @@ cmd_gen_ksymdeps = \
endif
ifdef CONFIG_LIVEPATCH
-cmd_livepatch = $(if $(LIVEPATCH_$(basetarget).o),
\
+cmd_livepatch = $(if $(LIVEPATCH_$(basetarget)),
\
$(shell touch $(MODVERDIR)/$(basetarget).livepatch))
endif
@@ -288,9 +288,9 @@ $(obj)/%.o: $(src)/%.c $(recordmcount_source)
$(objtool_dep) FORCE
$(single-used-m): $(obj)/%.o: $(src)/%.c $(recordmcount_source)
$(objtool_dep) FORCE
$(call cmd,force_checksrc)
$(call if_changed_rule,cc_o_c)
+ $(call cmd,livepatch)
@{ echo $(@:.o=.ko); echo $@; \
$(cmd_undef_syms); } > $(MODVERDIR)/$(@F:.o=.mod)
- $(call cmd_livepatch)
quiet_cmd_cc_lst_c = MKLST $@
cmd_cc_lst_c = $(CC) $(c_flags) -g -c -o $*.o $< && \
@@ -469,6 +469,7 @@ cmd_link_multi-m = $(LD) $(ld_flags) -r -o $@
$(filter %.o,$^) $(cmd_secanalysis
$(multi-used-m): FORCE
$(call if_changed,link_multi-m)
+ $(call cmd,livepatch)
@{ echo $(@:.o=.ko); echo $(filter %.o,$^); \
$(cmd_undef_syms); } > $(MODVERDIR)/$(@F:.o=.mod)
$(call multi_depend, $(multi-used-m), .o, -objs -y -m)
--
2.16.4